Serial data out of Uart

The SpeakUp software is a for configuring SpeakUp, the speech recognition click board.
Post Reply
Author
Message
monsteroz
Posts: 5
Joined: 16 Jan 2015 01:00

Serial data out of Uart

#1 Post by monsteroz » 16 Jan 2015 01:14

Hi,

Firstly I just received my Speakup and I like it alot.

My aim is to use it by sending Index codes to a Raspberry PI via wireless but to get things tested first I have wired the UART (Mikrobus) TX,RX and GND to a Serial to USB converter on a PC and have a Terminal program running on the PC.

When the Speakup boots up I get a "Ready" on the terminal screen .

I test the speakup with a word I have recorded and I know it has recognised it as the red LED stays on longer but no Index code is sent to the terminal.

I have set the notify master to UART and the baud rate is right as I get the "ready"

Any ideas

Cheers

Sean

User avatar
filip
mikroElektronika team
Posts: 11874
Joined: 25 Jan 2008 09:56

Re: Serial data out of Uart

#2 Post by filip » 23 Jan 2015 16:17

Hi,

I believe my colleague has answered you on the other topic regarding this issue.

Regards,
Filip.

Post Reply

Return to “SpeakUp Software”