Installing drivers in win10
-
- Posts: 361
- Joined: 14 Dec 2005 20:56
- Location: Slovenia
Installing drivers in win10
Dear all, how to install mikroProg drivers in windows 10?
Regards
Vlado
Regards
Vlado
Vlado
Re: Installing drivers in win10
Hi,
We haven't tested the drivers on the Windows 10, but you can download the current drivers for Windows 8, they should work.
Regards,
Filip.
We haven't tested the drivers on the Windows 10, but you can download the current drivers for Windows 8, they should work.
Regards,
Filip.
-
- Posts: 361
- Joined: 14 Dec 2005 20:56
- Location: Slovenia
Re: Installing drivers in win10
I manage to install drivers, it is shown in device manager, also mokroProg has yelow LED on, but in mikroProgSuite under USB there is no optoin to select programer device.
Any idea would be appreciated.
Regards.
Any idea would be appreciated.
Regards.
- Attachments
-
- mikroProgramer.png (114.69 KiB) Viewed 8267 times
Vlado
Re: Installing drivers in win10
Hello Vlado from California
Today is a well deserved off day for the great technical support team of MikroElektronika
You'll have to wait until tomorrow to hear from them. And I'm sorry, but I don't have Windows 10 yet so that I can try to help by experiment
I'm guessing that there might be a need for a new version of (MikroProg suite For PIC), or maybe a new firmware for the (MikroProg for PIC) hardware programmer. The problem is that Windows 10 isn't delivered to all customers yet
In your picture, the USB icon in the bottom of the window of (MikroProg suite For PIC) is coloured, which means that it found a device, but for some reason, it cannot select it.
I do have a couple of questions if you may:
1- Were you able to use the same hardware on a different PC running a Windows version less than 10 without any problems?
2- What is your connected hardware (EasyPIC - MikroProg - ...)?
3- Did you try to start the (MikroProg suite for PIC) from both your compiler and as a stand alone application?
Best Regards
Today is a well deserved off day for the great technical support team of MikroElektronika
You'll have to wait until tomorrow to hear from them. And I'm sorry, but I don't have Windows 10 yet so that I can try to help by experiment
I'm guessing that there might be a need for a new version of (MikroProg suite For PIC), or maybe a new firmware for the (MikroProg for PIC) hardware programmer. The problem is that Windows 10 isn't delivered to all customers yet
In your picture, the USB icon in the bottom of the window of (MikroProg suite For PIC) is coloured, which means that it found a device, but for some reason, it cannot select it.
I do have a couple of questions if you may:
1- Were you able to use the same hardware on a different PC running a Windows version less than 10 without any problems?
2- What is your connected hardware (EasyPIC - MikroProg - ...)?
3- Did you try to start the (MikroProg suite for PIC) from both your compiler and as a stand alone application?
Best Regards
My hobby is collecting MikroElektronika products.
Gotta catch them all!
Gotta catch them all!
-
- Posts: 361
- Joined: 14 Dec 2005 20:56
- Location: Slovenia
Re: Installing drivers in win10
I am sure ME team deserve more than one day per week to get rest from all of our wishes and problems. Their job is very appreciated.
Hardware & software & drivers: http://www.mikroe.com/mikroprog/pic-dspic-pic32/
Everything was ok with win8.1 which means drivers and software was installed by ME aditional manual.
Regaards
Hardware & software & drivers: http://www.mikroe.com/mikroprog/pic-dspic-pic32/
Everything was ok with win8.1 which means drivers and software was installed by ME aditional manual.
Regaards
Vlado
Re: Installing drivers in win10
Hello again
Still, we appreciate their amazing effort and time deeply
Could you please answer my last question in my previous post, which is "Did you try to start the (MikroProg suite for PIC) from both your compiler and as a stand alone application?"
Best Regards
I couldn't agree more on your kind words, but for the record, they get two days off, which are today and yesterdayCalifornia wrote:I am sure ME team deserve more than one day per week to get rest from all of our wishes and problems. Their job is very appreciated.
Still, we appreciate their amazing effort and time deeply
Could you please answer my last question in my previous post, which is "Did you try to start the (MikroProg suite for PIC) from both your compiler and as a stand alone application?"
Best Regards
My hobby is collecting MikroElektronika products.
Gotta catch them all!
Gotta catch them all!
Re: Installing drivers in win10
The mikroprog suit runs under win10.
Start the compiler and burn the controler.
In the list from the siut there is the hardware.
Start the compiler and burn the controler.
In the list from the siut there is the hardware.
-
- Posts: 361
- Joined: 14 Dec 2005 20:56
- Location: Slovenia
Re: Installing drivers in win10
MikroProg suite for PIC was used as a stand alone application.
Firewire is right, I can load hex when mikroProg is started from compiler.
Regards
Firewire is right, I can load hex when mikroProg is started from compiler.
Regards
Vlado
-
- Posts: 361
- Joined: 14 Dec 2005 20:56
- Location: Slovenia
Re: Installing drivers in win10
First picture shows load from the compiler, a second one is as stand alone aplication.
Regards
Regards
- Attachments
-
- mikroProgramer_1.png (186.85 KiB) Viewed 8248 times
Vlado
Re: Installing drivers in win10
We're glad that your issue got solved
Your post has given me the idea to avoid rushing to install Windows 10 when my reservation is delivered
Maybe I should wait until it gets more users (Including MikroElektronika's software development team)
btw, thanks for providing the photos. They give a clear image of what's going on
Best Regards
Your post has given me the idea to avoid rushing to install Windows 10 when my reservation is delivered
Maybe I should wait until it gets more users (Including MikroElektronika's software development team)
btw, thanks for providing the photos. They give a clear image of what's going on
Best Regards
My hobby is collecting MikroElektronika products.
Gotta catch them all!
Gotta catch them all!
-
- Posts: 361
- Joined: 14 Dec 2005 20:56
- Location: Slovenia
Re: Installing drivers in win10
Inside of the folder mikroProg suite for PIC are located two program files, diferent names, but each of them has 1694 KB.
Could this be a problem?
Regards
Could this be a problem?
Regards
- Attachments
-
- mikroProgramer_2.png (57.85 KiB) Viewed 8238 times
Vlado
Re: Installing drivers in win10
In another computer i install win 10
and mikroprog suite with driver.
I´m not installed the compiler.
And in the window it shows me the correct device.
and mikroprog suite with driver.
I´m not installed the compiler.
And in the window it shows me the correct device.
Re: Installing drivers in win10
Hello Vlado of California
I've got the same two files in my folder, and both have the same size, which is the same as yours, so no need for worries
Hello FireWire
That is quite strange
I guess I'll wait until Windows 10 gets a lot more popular before deciding to install it
Best Regards
I've got the same two files in my folder, and both have the same size, which is the same as yours, so no need for worries
Hello FireWire
That is quite strange
I guess I'll wait until Windows 10 gets a lot more popular before deciding to install it
Best Regards
My hobby is collecting MikroElektronika products.
Gotta catch them all!
Gotta catch them all!
Re: Installing drivers in win10
Hi,
@California,
If you run the mikroProg Suite as Admin, does this help ?
Regards,
Filip.
@California,
If you run the mikroProg Suite as Admin, does this help ?
Regards,
Filip.
-
- Posts: 361
- Joined: 14 Dec 2005 20:56
- Location: Slovenia
Re: Installing drivers in win10
Yes, starting mikroProg Suite as Admin helps 100%. Now I can see device under USB.
Thanks Filip, Regards
Thanks Filip, Regards
Vlado