ADC 2 click released

Here you can find latest news on mikroElektronika products.
Post Reply
Author
Message
User avatar
srdjan.misic
mikroElektronika team
Posts: 296
Joined: 11 Feb 2014 15:55

ADC 2 click released

#1 Post by srdjan.misic » 10 Aug 2015 21:02

ADC 2 click released

"Let's get digital, digital" — with ADC 2 click, carrying a 22-bit analog to digital
converter.

Image

If you need higher accuracy that you could get with the original 12-bit ADC click,
then consider this one. ADC 2 click carries the MCP3551 IC. In addition to the high
resolution, this chip has an unadjusted error rate of less than 10 ppm, and low-output
noise of 2.5 µV RMS.

Two pairs of screw terminals let you bring the voltage in and out, while the digital value
is communicated to the target MCU through mikroBUS™ MISO, CS and CSK pins.

Like the original ADC click, this one also has a jumper to let you specify whether you’ll
use 4.096V or VCC as the reference voltage.

More details on the product page. The Libstock example, for EasyPIC v7, is
ready.

Yours sincerely,
MikroElektronika

SimonD
Posts: 36
Joined: 04 Aug 2011 11:54

Re: ADC 2 click released

#2 Post by SimonD » 02 Sep 2015 08:31

Any chance for ARM STM32 (mikrobasic) example ?

User avatar
biljana.nedeljkovic
mikroElektronika team
Posts: 1043
Joined: 30 Jun 2015 15:15

Re: ADC 2 click released

#3 Post by biljana.nedeljkovic » 02 Sep 2015 15:56

Hello Simon,

we will do our best to provide the example for this click for STM32 as well.

Thank you for your patience.

Best regards,
Biljana

gg-rpg
Posts: 28
Joined: 06 Apr 2016 07:44

Re: ADC 2 click released

#4 Post by gg-rpg » 03 Aug 2018 09:23

Hmmm ... how about an "EasyPIC Fusion V7 with mikroC32" - example?

User avatar
filip.grujcic
Posts: 822
Joined: 14 May 2018 08:34

Re: ADC 2 click released

#5 Post by filip.grujcic » 06 Aug 2018 14:14

Hi,

Which MCU would you like this example for?

Kind regards,
Filip Grujcic

Post Reply

Return to “Product Announcements”