1) How much faster are A/D conversions if I perform them myself based on the calculations from the datasheet? Or does the function perform these calculations per the datasheet?
2) I am using this command:
Code: Select all
while(1) {
WordToStr(ADC_Read(0), file_contents);
Mmc_Fat_Write(file_contents, _FILE_CONTENTS_SIZE);
}
3) In short, in what ways can I optimize the speed at which I can get the ADC_Read() values to the card?
[edit] I should add that at 32MHz I am getting ~ 40 writes/second.