SAP1024B GLCD Controller

General discussion on mikroC.
Post Reply
Author
Message
firatkocak
Posts: 119
Joined: 25 Mar 2008 10:56
Location: Izmir

SAP1024B GLCD Controller

#1 Post by firatkocak » 21 Oct 2008 14:43

Hi,

I had bought a glcd months ago. I wanted to adopt it to my project board. I checked the glcd controller and saw that it was SAP1024B. I have reviewed the data sheet and there is nothing about T6963C compliance. I tried T6963C example provided by Mikro Elektronika. Nothing displayed on the glcd screen except some weird lines. No text and no graphics displayed on the screen.

Either do i make some mistake on the cabling ( i checked it so many ) or is SAP1024B not compliant to T6963C.

Is there anyone who knows about this controller ? I started to write a library for this controller. If it is really not compliant to T6963C, then i will stop writing a library for it.

Best regards,

FIRAT KOCAK

idakota
Posts: 334
Joined: 27 Sep 2006 08:07
Location: Pretoria/South Africa
Contact:

#2 Post by idakota » 21 Oct 2008 15:44

You'll have to sit with the datasheets from the SAP1024B and the T6963C and compare the instructions to determine if they are compatible or not.

firatkocak
Posts: 119
Joined: 25 Mar 2008 10:56
Location: Izmir

#3 Post by firatkocak » 21 Oct 2008 17:38

Hi,

Thanks for the comment. It is funny how i can not think of it :) . Yes, i downloaded T6963C and it seems datasheets are the same. So i should check my cabling and connections again.

Best regards,

Firat Kocak

magda
Posts: 3
Joined: 27 Jun 2010 10:12

Re: SAP1024B GLCD Controller

#4 Post by magda » 27 Jun 2010 23:56

hi firatkocak :) I have your same problem and I wonder if you are able to solve ... I tried using the toshiba lib controller but do not see anything ... :(
I have not understood what is the pin PD "control pin for oscillation" and where I do put it... Please help me :|

Post Reply

Return to “mikroC General”