ME examples not working with TFT on Fusion Board and Visual
Posted: 03 Oct 2012 08:47
I recently purchased the PIC32 Fusion board with P32MX795F512L on board. Also I purchased mikroC for PIC32 v2.4.0 and Visual TFT v 2.71.
My problems are:
1) Using samples downloaded from ME website I programmed the "LED test" program to the CPU: it worked fine, no problems there, however when I loaded the "calculator", "simple maze" and anything related to the TFT there's nothing on the display...
I checked the DIP switches etc and also, when the board arrived, the CPU was pre-loaded with some lines and ME logo, it was showing on the TFT so it cannot be the hardware fault.
2)Visual TFT: here's no choice to choose Fusion development board from 'Hardware Pattern" I choose PIC32MX7 (as very similar) and tried exactly step-by-step "your first TFT project", compiled it and sent to the CPU but nothing was displayed on the TFT (it could be related to the problem above with the board).
I am not new to the ME equipment as I have older PIC programming boards but I just cannot overcome this issue.
Please help,
My problems are:
1) Using samples downloaded from ME website I programmed the "LED test" program to the CPU: it worked fine, no problems there, however when I loaded the "calculator", "simple maze" and anything related to the TFT there's nothing on the display...
I checked the DIP switches etc and also, when the board arrived, the CPU was pre-loaded with some lines and ME logo, it was showing on the TFT so it cannot be the hardware fault.
2)Visual TFT: here's no choice to choose Fusion development board from 'Hardware Pattern" I choose PIC32MX7 (as very similar) and tried exactly step-by-step "your first TFT project", compiled it and sent to the CPU but nothing was displayed on the TFT (it could be related to the problem above with the board).
I am not new to the ME equipment as I have older PIC programming boards but I just cannot overcome this issue.
Please help,