Problem with ICD MikroProg

General discussion on mikroElektronika development boards.
Post Reply
Author
Message
grandegiove
Posts: 79
Joined: 13 Dec 2010 10:34

Problem with ICD MikroProg

#1 Post by grandegiove » 02 Sep 2011 13:16

Hi,

I'm using MikroC for PIC32 with license and the MikroProg to program the MCU.

I've no problem to program the PIC but when I try to use ICD something doesen't function.

Setting correctly the project settings (Build type:ICD Rlease Debugger:MikroICD) when I click on "Start Debugger" an error windows is shown: "Mikroelektronica ICD Hardware not found".

What can I chek? Thanks for the support!

Franek

OT
Posts: 581
Joined: 19 May 2005 05:08
Location: Fairbanks, Alaska

Re: Problem with ICD MikroProg

#2 Post by OT » 09 Sep 2011 02:19

Not the same chip, but perhaps this thread can help:
http://www.mikroe.com/forum/viewtopic.php?f=106&t=36737

User avatar
janko.kaljevic
Posts: 3565
Joined: 16 Jun 2011 13:48

Re: Problem with ICD MikroProg

#3 Post by janko.kaljevic » 10 Sep 2011 09:01

Hello,

Thanks OT, I believe that you are right.

grandegiove
Posts: 79
Joined: 13 Dec 2010 10:34

Re: Problem with ICD MikroProg

#4 Post by grandegiove » 23 Nov 2011 08:19

Hi,

I properly set the ICD communication channel.
I powered the board with the programmer.
I set properly the Project Setting:
-Build Type: ICD Debug
-Debugger: MikroICD

but as soon as I press "Start debugger" (F9) immediatly I have the error: "Mikroelektronika ICD Hardware not found"

Simply programming the MCU no problem. What could be the problem? Thanks a lot!

User avatar
janko.kaljevic
Posts: 3565
Joined: 16 Jun 2011 13:48

Re: Problem with ICD MikroProg

#5 Post by janko.kaljevic » 25 Nov 2011 11:47

Hello,

Please can you tell me, did you connected your board to power supply unit?
During ICD you need to power your chip.
You can do this by connecting external power supply, or by powering from mikroProg.
Tools >> MikroProg Power Options >> and there you should enable power supply for your board.

Best regards.

Post Reply

Return to “Development Boards”