EasyPIC PRO v7 is all about connectivity. Having two different connectors for each port, you can connect accessory boards, sensors and your custom electronics easier then ever before.
Powerful on-board mikroProg programmer and In-Circuit debugger can program and debug almost 100 microcontrollers. You will need it, whether you are a professional or a beginner.
EasyPIC PRO v7 is among few development boards which support both 3.3V and 5V microcontrollers. This feature greatly increases the number of supported MCUs.It’s like having two boards instead of one!
Just plug in your mikroBUS board, and it’s ready to work. We picked up a set of the most useful pins you need for development and made a pinout standard you will enjoy using.
EasyPIC PRO™ v7 is a full-featured development board for high pin-count 8-bit PIC® microntrollers. It contains many on-board modules necessary for development variety of applications, including graphics, Ethernet, USB, Temperature measurement and other. On-board mikroProg™ programmer and debugger supports nearly 100 PIC® microcontrollers. Board is delivered with MCU socket containing PIC18F87K22 microntroller.
Note: 2x16 Character LCD and Graphic LCD with Touch Screen are sold separately.
It’s a big difference
What makes this board so unique is that it comes with powerful on-board mikroProg programmer and In-Circuit Debugger, capable of programming almost 100 microcontrollers. This makes development with EasyPIC PRO™ v7 a whole new experience. Whether you are just a beginner, or a well-trained professional, this remarkable feature is an irreplaceable advantage.
On-board modules for all kinds of development
Board has modules for all kinds of development. GLCD with Touch Panel, allow you to develop graphical applications. There is a USB device connector on-board, as well as RS-232 and USB-UART. Piezo buzzer will help you test your sound signalization, and you can use I2C EEPROM to store configuration data. DS1820 and LM35 temp sensor sockets are here too.
Supports Click™ Boards
With three mikroBUS™ sockets you can add dozens of new functionality to your board with minimum hardware adjustments. Collection of mikroBUS™ compatible Click Boards is growing rapidly, and we have designed them with great care, so you don’t have to make any complicated settings. Just plug your board in, and you are good to go.
RJ-45 connector
Board is equipped with Ethernet connector
and two signal LEDs which enable you to
utilize ethernet feture of PIC®
microcontrollers.
All you need to get started: well commented and easy to understand examples and colour user-friendly manuals. Examples demonstrate each on-board module and are a great starting point for your future projects. User manuals are easy to read, with good explanations and lots of photos.
Examples are written for all mikroE PIC compilers: mikroC, mikroBasic and mikroPascal. They are well commented and each example contains working HEX file which you can load and use right away.
For drivers and software for on-board mikroProg™ programmer and debugger visit Programming tab.
Hover your cursor over the desired module and instantly get more information. Get to know your board even before you buy it.
You can simulate analog inputs using two provided analog potentiometers which can be connected to each of the 10 supported microcontroller analog input pins.
GLCD and LCD backlight can be driven with PWM signal from the microcontroller, or they can be turned on in full brightness.
Use these switches to pull-up or pull-down buttons in each input/output group.
Board supports Dallas DS1820 One-Wire digital temperature sensor. You can measure temperatures from -55C to +125C (-67F to +257F), with 0.5C accuracy.
Board is equipped with power supply unit capable of supporting both 3.3V and 5V microcontrollers. Board can be powered over USB cable, or external adapter connectors.
Microcontrollers with internal ethernet support can be connected to this RJ-45 connector to establish ethernet communication.
You can place GLCD 128x64 display directly on the board and firm it in place securely using high-quality plastic distancer, specially designed for this purpose.
This potentiometer allows you to adjust the contrast level of the pixels on your GLCD 128x64 display.
You can store 8x256 bytes of configuration data or other data into on-board 24AA01 Serial EEPROM with I2C interface.
If you need to use other external programmer with EasyPIC PRO v7, we have provided the ICD2/ICD3 compatible connector, so you can override the on-board mikroProg.
Two male IDC10 port headers are available in each Input/Output group, which is convenient for easier access to any PORT pin.
Board is equipped with LCD 2x16 connector which allows you to connect LCD 2x16 display and place it securely using plastic distancer, specially designed for this purpose.
This potentiometer allows you to adjust the contrast level of the pixels on your LCD 2x16 character display.
The LM35 is a low-cost precision integrated-circuit analog temperature sensor. It can measure temeperatures from -55C to +150C with 0.25C accuracy at room temperatures.
Featuring nanoWatt XLP Technology, PIC18F87K22 is great 8-bit microcontroller with lots of peropherals. It has 128KB of program memory, 3862 bytes of RAM and up to 16 MIPS operation.
EasyPIC PRO™ v7 provides two mikroBUS sockets for mikroElektronika Click Boards. mikroBUS provides simple and effective Plug-and-Play connectivity solution.
EasyPIC PRO™ v7 provides two mikroBUS sockets for mikroElektronika Click Boards. mikroBUS provides simple and effective Plug-and-Play connectivity solution.
EasyPIC PRO™ v7 provides two mikroBUS sockets for mikroElektronika Click Boards. mikroBUS provides simple and effective Plug-and-Play connectivity solution.
On-board mikroProg™ In-Circuit Debugger and programmer is supports over 250 microcontrollers from Microchip.
Programmer USB connector is connected to on-board mikroProg, but can also be used to power the board, when the J2 jumper in the Power Supply section is in the USB position.
Three separate GND pins are available on the board for easier connection of GND reference for oscilloscope probes.
Board features two pairs of high-quality screw terminals meant to be used as an output of the on-board dual power supply module. Use them to power your additional 5V and 3.3V devices.
With piezo buzzer you can debug your applications, or have audio signalization feature. It can be connected to two digital output pins, one of which is the output of PWM module.
High quality reset button with surrounding reset circuitry ensures stable reset operation.
We have provided additional PORT header on the right side of the board, so you can now access the desired microcontroller pins on the other side of the board too.
Each Input/Output PORT group contains red SMD LEDs with low current consumption of only 1mA. Board contains total of 36 LEDs for PORT pins.
Push buttons in each Input/Output group enable you to have digital inputs on each port pin. Buttons are of high quality and have an exceptional and stable response.
Touch panel controller with connector is provided for analog resistive touch panels attached to the GLCD 128x64 to form GLCD Touch screen.
Tri-state DIP switches are used to enable 4K7 pull-up or pull-down resistor on ony desired PORT pin.
USB Device Connector is used for connecting the board with other devices such as PC using fast USB 2.0 communication.
Fast on-board FTDI chip with USB connector, allows you to communicate with a PC or other UART devices using USB-UART connection.
You can implement UART communication through RS-232 connector provided on the board.
EasyPIC PRO™ v7 currently supports nearly 100 Microchip microcontrollers. Browse through the list of supported devices or use the search box to filter out the microcontrollers or families you are interested in. For example, by typing “PIC18F8” will leave only PIC18F8XXX, PIC18F8XJXX and PIC18F8XKXX microcontrollers in the list. More detailed search string will leave more narrow list of devices in the list box.
|
||||||
EasyPIC PRO™ v7 opens a door with unlimited possibilities. And the story had only just started. We present you with set of accessory boards that will allow you to implement almost every idea you had in mind. Each board comes with demonstration examples, so you always have a place to start. See it for yourself!
Equip your EasyPIC PRO v7 with accessories. Add displays, touch screen, temperature sensors, UART and USB cables, and use wire jumpers for additional testing and connections.
Add GLCD 128x64 with resistive touch screen to your development board. Create graphical interfaces in your application and enable user input via touch panel.
$24.00
If you need LCD display in your development, we offer 2x16 character LCD display with 7x5 pixel fields, blue background, white pixels and a great contrast.
$9.80
If you use UART in your application, we offer you 1.8 meter long RS-232 cable with male-to-female DB9 connectors. This cable ensures that it can withold fast baudrates of your UART transmission.
$1.50
If you need another MCU Card with PIC18F87K22 for your development you can get it here. It has 128KB of program memory, 3862 bytes of RAM and up to 16 MIPS operation.
$21.00
Expand your EasyPIC PRO v7 functionality by adding DS1820 1-wire digital temperature sensor with -55°C to +128°C temperature range, and ±0.5°C accuracy. Sensor comes in TO-92 packaging.
$7.40
LM35 is the analog temperature sensor supported by EasyPIC PRO v7, whose output voltage is lineary proportional to the Celsius temperature. It has -55°C to +150°C temperature range, and ±0.75°C accuracy.
$3.50
Use plastic telescopic pen for increased precision when working with your touch panel applications. This Plastic Pen is meant to be used with resistive touch panels only.
$2.00
Easily connect your EasyPIC PRO v7 with additional electronics using wire jumpers. We offer femate-to-female, male-to-male and female-to-mail single pin wire jumper flavours.
$3.00
EasyPIC PRO™ v7 is packed in the protective box along with the relevant documentation and product DVD. This box is very resistant to all kinds of damages and shocks. The package contains:
Damage resistant
protective box
EasyPIC PRO™ v7 board in
antistatic bag
USB cable
User Manual and
Board Schematic
DVD with documentation
and code examples
All credit card and personal details are kept secure, and our customer list is not disclosed to any third party. Most shipments are sent within 48 hours of your order. 2Checkout.com is an authorized reseller of goods and services provided by mikroElektronika.
We deliver our products to all countries in the world using following shipping options:
DHL Express: $25.00 USD for up to 5 Kgs, usually arrives in 2-4 business days.*
Post Office: $25.00 USD, no weight limit, usually arrives in 7-12 business days.
* - Please contact your local DHL office about delivery service and possible additional charges.
EasyPIC PRO v7 Development System
$169.00 USD
Optional:
EasyPIC PRO v7 MCUcard with PIC18F87K22
$21.00 USD
EasyPIC PRO v7 MCUcard with PIC18F87J50
$21.00 USD
EasyPIC PRO v7 MCUcard with PIC18F8722
$21.00 USD
EasyPIC PRO v7 MCUcard with PIC18F8520
$19.00 USD
EasyPIC PRO v7 MCU card with PIC18F87J60 ETH
$19.00 USD
