Large 320x240 TFT Color Display with Touch Screen, Stereo MP3 Codec, and Accelerometer give you true power to build full multimedial applications.
Board is carefully designed and is very compact and handy. We have used the highest quality components and 4-layer PCB to achieve maximum efficiency.
Charge your batteries directly from USB port. No additional electronics, or expensive adapters. Just plug-in the cable, and this little board will handle the rest.
You can save pictures, sounds and other media files on microSD memory card and use it in your application.
MikroMedia for ARM ia compact high-quality multimedia development platform for LPC2148 ARM7 device. It has numerous on-board modules, that allow you to write multimedia applications. This board can be used for both development or as a final product.
LPC2148 ARM7 is a microcontroller with 512kb of embedded high speed flash memory. A 128-bit wide memory interface and a unique accelerator architecture enable 32-bit code execution at the maximum clock rate. For critical code size applications, the alternative 16-bit Thumb mode reduces code by more than 30 % with minimal performance penalty.
On-board LPC2148 is programmed with fast In-System Programmer, so it’s ready to work right out of the box. You don’t have to spend a dollar more on external programmers. You can also program and debug the board using external programmer over on-board JTAG connector.
Examples that come with the board demonstrate each feature of the board and help you to get started right away.
All you need to get started: Examples, manuals, and programming software. Download examples and load them in your mikroMedia to see how it works. Examples demonstrate each on-board module and are a great starting point for your future mikroMedia projects.
Examples are written for KEIL uVision compiler. They are well commented and each example contains working HEX file which you can load and use right away.
mikroMedia for ARM can be programmed with fast In-Serial UART Programming, using Flash Magic application. Unless you need to use In-Circuit debugger, this is the best solution for fast and easy downloading of your new .HEX into the MCU.
Scroll your cursor over the desired module and instantly get more information. Get to know your board even before you buy it. Become a mikroMedia geek.
Plug-in your headphones and listen to audio output from mp3 decoder circuit.
MCP73832 Battery Charger circuit enables you to charge your Li-Polymer battery directly from USB port.
Li-Polymer battery connector allows you easier connection with your battery. Autonomous power supply will give your mikromedia the wings it deserves.
Every unsused microcontroller pin is available through connection pads. They can be used to connect your mikromedia board with additional shields or accessory boards.
FTDI chip allows your mikromedia board to be connected with a PC through USB cable over UART connection.
IDC30 JTAG male connector should be used for programming and debugging the microcontroller using external programmer/debugger.
Solder a jumper at these connection pads in order to enable JTAG programming.
Having lots of MIPS power, just enough flash and RAM, and rich set of inegrated modules, LPC2148 is ideal choice for both beginners and professionals.
microSD Card slot allows you to store large ammounts of data externally on microSD card using fast SPI communication.
VS1053 MPEG audio decoder with SPI interface for fast reproduction of MP3 files.
Power and charge indicator LEDs are useful indicators of current power supply state of our mikromedia board.
On-Board power regulator ensures that each part of the board get the right voltages.
Your can program the board using In-System programming, supported in the ARM7 core. No external programmers are needed for this, just a specific programming software.
High quality reset button with surrounding reset circuitry ensures stable reset operation.
320x240 TFT Color Display with Touch Panel can display vivid and clear color images or advanced graphic content.
Solder 0 Ohm resistor in left or right position to enable specific 16- or 8-pin TFT mode operation.
USB Device Connector is used for connecting the board with other devices such as PC using fast USB 2.0 communication.
Solder 0 Ohm resistor in left or right position to enable specific software connection mode.
12Mhz oscillator circuit that provides external clock is connected to microcontroller osc pins.
You probably think your board is as cool as it gets. Well, we present you with additional accessories that can make your board shine. Give your board the wings it deserves with battery power supply, and purchase industry standard durable microSD card for your multimedia applications. Don’t forget the earphones!
Battery Boost shield is an extension board that enables autonomous power supply using 2 x AAA batteries. It carrries MCP1640 integrated circuit that provides stable +4.0V power supply voltage.
$14.00 USD
PROTO shield is an extension board that enables users to place components and provide additional functionality to the base board. With connection pads, it’s easy to connect pins to the breadboard area.
$6.90 USD
Need a mass storage in your device? With our microSD card you have 1GB of memory and two additional adapters for full compatibility with your devices.
$10.35 USD
Use plastic telescopic pen for increased precision when working with your touch panel applications. Pen is meant to be used with resistive touch panels only.
$2.00 USD
Get additional 1x26 male pin headers for your mikromedia board. Whether you want to connect it to your prototype board, or you simply need a spear one.
$0.70 USD
Easily connect your mikromedia with additional electronics using wire jumpers. We offer female-to-female, male-to-male and female-to-male single pin wire jumper flavors.
$3.00 USD
These are great! Additional stacking headers might come in handy because they are convenient when you want to stack multiple shields together with your mikromedia board in various ways.
$1.60 USD
Additional female 1x26 socket, in case you need it. Mikromedia board comes with two male 1x26 pin headers, so you might want to get female connectors, in case you come up with some project idea.
$0.90 USD
Perfect solution for your favorite multimedia board or your personal mp3 player. Test your multimedia projects and listen to your favorite tunes.
$5.00 USD
If you need a battery power supply, we have a great and compact solution. This rechargable 1000mAh 3.7V battery can deliver even more. It’s compatible with on-board connector and battery charger.
$9.00 USD
mikroMedia for ARM is packed in the protective box along with the relevant documentation on product DVD. This box is very resistant to all kinds of damages and shocks. The package contains:
Damage resistant
protective box
mikroMedia for ARM
board in antistatic bag
USB cable
DVD with documentation
and code examples
All credit card and personal details are kept secure, and our customer list is not disclosed to any third party. Most shipments are sent within 48 hours of your order. 2Checkout.com is an authorized reseller of goods and services provided by mikroElektronika.
We deliver our products to all countries in the world using following shipping options:
DHL Express: $25.00 USD for up to 5 Kgs, usually arrives in 2-4 business days.
Post Office: $25.00 USD, no weight limit, usually arrives in 7-12 business days.
mikromedia for ARM
$99.00 USD
