dsPICprog with mikroICD support

Overview

dsPICprog with mikroICD is a programmer and in-circuit debugger for dsPIC30F microcontrollers.

High-Performance On-Board USB 2.0 Programmer

Very fast, on-board USB 2.0 programmer with a simplified driver installation.

mikroICD is a hardware tool designed for testing and debugging programs on dsPIC30F MCUs.

Description

Connecting Programmer

One of the possible ways of connecting dsPICprog with mikroICD to a microcontroller is via an IDC10 connector. Refer to figure on the right. You just have to place one 2x5 connector between the microcontroller and other on-board components. By inserting dsPICprog with mikroICD connector you will be able to perform dsPIC In System Programming.

When plugged in ZIF socket, it becomes a standard programmer.

Our latest dsPICprog with mikroICD programmer is driven and powered by a single USB port on a PC. No additional AC power adapter is needed. The programmer is recognized by Windows, which simplifies the driver installation. The programmer board is specifically designed for In-Circuit Serial Programming (ICSP).

dsPICprog with mikroICD support - USB 2.0 programmer and mikroICD (In-Circuit Debugger)

Programmer Software

2 in 1 Development Tool - On-Board USB 2.0 programmer + On-Board mikroICD (In-Circuit Debugger): mikroICD is a highly effective tool for Real-Time debugging at hardware level. It enables you to execute mikroC PRO, mikroPascal PRO and mikroBasic PRO programs on a host dsPIC30F MCU and monitor variable values, Special Function Registers (SFRs), RAM and EEPROM memory modules while the program is running. There is also an ultra fast USB 2.0 programmer for MCU programming that now supports a wide range of dsPIC30F MCUs.

The microcontroller is connected to the dsPICprog programmer via 5 lines, two of which are +5V and GND. Unlike programmers whose operation is based on bootloaders and need to put a part of their memory at a bootload program's disposal, dsPICprog programs the microcontroller externally so that the entire memory is available to the programmer. dsPIC microcontrollers can be programmed with 5V and 12.5 V. If 5V is used, the RB3 pin is used for programming and therefore cannot be used for other purposes. dsPICprog generates 12.5V by means of a supply pump, thus leaving the RB3 pin free. Connection to a PC is established via the USB port, which means that the dsPICprog programmer can work with all computers.

Windows^® Certified Drivers

Drivers for the programmer are Microsoft^® Windows^® XP, Windows^® Vista and Windows^® 7 certified. The Windows certificate is a proof that the programmer supports mentioned Windows operating systems and is immediately recognized by the system, which guarantees correct Plug and Play functionality. Driver certification provides users with a wide range of benefits such as stable functioning, the ability to install and delete drivers without rebooting and compatibility with future versions of Windows.

Supported Microcontrollers

The dsPICprog programmer supports a wide range of dsPIC30F MCUs. Newly released dsPIC30F microcontrollers will be supported by a new version of dsPICprog software that is updated regularly. Here is a list of microcontrollers supported by the dsPICprog programmer:

dsPIC30F Microcontroller Family
dsPIC30F1010	dsPIC30F2010	dsPIC30F2011	dsPIC30F2012
dsPIC30F2020	dsPIC30F2023	dsPIC30F3010	dsPIC30F3011
dsPIC30F3012	dsPIC30F3013	dsPIC30F3014	dsPIC30F4011
dsPIC30F4012	dsPIC30F4013	dsPIC30F5011	dsPIC30F5013
dsPIC30F5015	dsPIC30F5016	dsPIC30F6010	dsPIC30F6011
dsPIC30F6012	dsPIC30F6013	dsPIC30F6014	dsPIC30F6015
dsPIC30F6010A	dsPIC30F6011A	dsPIC30F6012A	dsPIC30F6013A
dsPIC30F6014A

Package Details

The dsPICprog programmer is packed in the protective box along with the relevant documentation and product CD. This box is very resistant to all kinds of damages and shocks. The package contains:

dsPICprog with mikroICD programmer.
USB cable.
CD with software and drivers.
Printed documentation that includes: dsPICprog with mikroICD Manual, mikroICD Manual and Quick Guide for Installing USB Drivers.

This product is shipped with fully functional demo versions of mikroC PRO for dsPIC, mikroBasic PRO for dsPIC and mikroPascal PRO for dsPIC compilers. All demo versions include a hex output limited to 6k of program words. These compilers come with examples for easy prototype development.

Documentation

English

Software

Featured Compilers

mikroC PRO for dsPIC30/33 and PIC24

Compiler mikroC PRO for dsPIC30/33 and PIC24 has all the ANSI C power and flexibility and the most advanced IDE on the market. Many practical examples and a comprehensive documentation allow a quick start in programming dsPIC30/33 and PIC24 microcontrollers. [more info]

mikroBasic PRO for dsPIC30/33 and PIC24

Compiler mikroBasic PRO for dsPIC30/33 and PIC24 provides easy-to-learn BASIC syntax, advanced compiler features, built-in routines and many practical examples that allow a quick start in programming dsPIC30/33 and PIC24 MCUs. [more info]

mikroPascal PRO for dsPIC30/33 and PIC24

Compiler mikroPascal PRO for dsPIC30/33 and PIC24 is a stand-alone compiler for dsPIC30/33 and PIC24 MCUs. Develop your applications in an intuitive and friendly Pascal environment, using many advanced features and practical examples. [more info]

Free Online Books

Programming dsPIC MCU in PASCAL

Learn how to write and debug your own program in Pascal. Learn how to use it to start up the microcontroller. The book includes numerous practical examples with necessary connection schematics. It is constantly updated with new examples. All codes are commented in details to make it easier for beginners to understand every single code portion. [more info]

Programming dsPIC MCU in BASIC

Learn how to write and debug your own program in Basic. Learn how to use it to start up the microcontroller. The book includes numerous practical examples with necessary connection schematics. It is constantly updated with new examples. All codes are commented in details to make it easier for beginners to understand every single code portion. [more info]

Programming dsPIC MCU in C

Learn how to write and debug your own program in C. Learn how to use it to start up the microcontroller. The book includes numerous practical examples with necessary connection schematics. It is constantly updated with new examples. All codes are commented in details to make it easier for beginners to understand every single code portion. [more info]

Ordering Information

We deliver our products to all countries in the world using following shipping options:

DHL Express: $25.00 USD for up to 5 Kgs, usually arrives in 2-4 business days.
Post Office: $25.00 USD, no weight limit, usually arrives in 7-12 business days.

Ordering of our products is done via 2Checkout payment gateway. If you have any problems with CC processing or you want to pay directly to our bank account please inform us:

2Checkout.com is an authorized reseller of goods and services provided by mikroElektronika

All credit card and personal details are kept secure, and our customer list is not disclosed to any third party, so you never have to worry about your credit card safety. Most shipments are sent within 48 hours of your order. Online purchasing experience of mikroElektronika products is fast, simple and secure. 2Checkout.com is an authorized reseller of goods and services provided by mikroElektronika.

$75.00 USD dsPICprog with mikroICD support