NOTE: Touch Screen, Pencil, MMC/SD card, Serial Cable and GLCD are not included in the price!
Overview
dsPICPRO4 is a development system that supports a wide range of 64- and 80-pin dsPIC30F MCUs.
Very fast, on-board USB 2.0 programmer with a simplified driver installation.
mikroICD is a hardware tool designed for testing and debugging programs on dsPIC30F MCUs.
dsPICPRO4 has a wide range of peripheral modules connected to the microcontroller.
On-board potentiometers are used for testing A/D converter inputs.
dsPICPRO4 includes an on-board touch screen controller with touch panel connector.
What's On-Board
Temperature sensor DS1820 measures temperature from -55°C to 125°C.
External power supply can be DC or AC. There is an on-board jumper used for selecting the external power supply.
ICD2 connector is used for connecting external programmer/debugger.
USB 2.0 programmer with mikroICD support is used for MCU programming and debugging.
Double RS-232 communication with a PC or a microcontroller is performed via DB9 connector.
ENC28J60 is a 28-pin, 10BASE-T stand-alone Ethernet Controller with SPI interface.
67 LEDs are used to indicate the logic state of all microcontroller pins.
Voltage reference used for A/D and D/A converters can be either VCC (5V) or 4.096 V.
CAN module is used to enable communication with other microcontrollers.
Real Time Clock PFC8583 with a battery supply is used to keep track of the current time even when the MCU is off.
RS485 communication module enables the microcontroller to communicate through the 485 network.
All microcontroller pins are connected to the IDC10 connectors for further expansion.
GLCD contrast potentiometer is used for adjusting graphic and standard LCDs.
67 push buttons are used to excite microcontroller digital inputs.
Voltage level to be applied when a button is pressed (GND or +5V) is selected via the on-board jumper.
USB or external power supply source is selected by moving a jumper. Power supply switch turns the system on/off.
System can be easily configured by means of DIP switches. Each DIP switch configures one part of the system.
12-bit output DAC MCP4921 with serial interface is used for applications in measuring and regulating devices.
On-board jumpers are used for pull-up/pull-down port configuration. These jumpers are available for all pins.
Touch Screen can be connected to the board via the touch screen connector.
System supports 64- and 80-pin dsPIC30 MCUs. It comes with a dsPIC30F6014A MCU Card.
MMC\SD card slot enables you to use MMC/SD cards in your work.
Reset circuit is used to reset the microcontroller. It is connected to the MCLR pin of the microcontroller.
2 potentiometers are used for testing multiple A/D conversions. Inputs can be configured via the on-board jumpers.
On-Board Programmer and In-Circuit Debugger
3 in 1 Development System - Development System + On-Board USB 2.0 programmer + On-Board mikroICD (In-Circuit Debugger): mikroICD is a highly effective tool for Real-Time debugging at hardware level. It enables you to execute mikroC, mikroPascal and mikroBasic programs on a host dsPIC30F MCU and monitor variable values, Special Function Registers (SFRs), RAM and EEPROM memory modules while the program is running. There is also an ultra fast USB 2.0 programmer for fast MCU programming that now supports more dsPIC30F MCUs.
Windows® Certified Drivers
Drivers for the on-board programmer are Microsoft® Windows® XP, Windows® Vista and Windows® 7 certified. The Windows certificate is a proof that the programmer supports mentioned Windows operating systems and is immediately recognized by the system, which guarantees correct Plug and Play functionality. Driver certification provides users with a wide range of benefits such as stable functioning, the ability to install and delete drivers without rebooting and compatibility with future versions of Windows.
Supported Microcontrollers
The dsPICPRO4 development system supports a wide range of dsPIC30F microcontrollers. Newly released dsPIC30F microcontrollers will be supported by a new version of dsPICprog software that is updated regularly. Here is a list of microcontrollers supported by the dsPICPRO4 development system:
| dsPIC30F Family | ||||||||
|---|---|---|---|---|---|---|---|---|
| dsPIC30F5013-PT | dsPIC30F6010A-PT | dsPIC30F6013A-PT | dsPIC30F6014A-PT | |||||
| dsPIC30F6014A-PF | dsPIC30F6011-PF | dsPIC30F6012-PF | dsPIC30F6010A-PF | |||||
| dsPIC30F6013A-PF | dsPIC30F6013-PF | dsPIC30F6014-PF | ||||||
Examples
- 7seg displays in multiplex mode.
- A/D conversion and displaying conversion results on LCD.
- A/D conversion and displaying conversion results on LEDs in binary form.
- A/D conversion and sending conversion results via USART.
- Timer 0 and time measurement.
- Measuring temperature with DS1820 and displaying results on LCD.
- Examples of SPI communication.
- Examples of CAN communication.
- Examples of Sound generation.
- Sending and receiving data over Ethernet.
- FIR_Radix Example.
- Port Expander Example.
- T6963C Graphic LCD Example.
- Interrupt upon port B state change.
- Detection of button pressed on port B.
- Displaying text on LCD.
- Diodes blinking on port B.
- Displaying text and images on Graphic LCD.
- Examples of I2C communication.
- Examples of RS485 communication.
- Examples of sending and receiving data using Manchester Code.
- Examples of Sinusoid generation.
- IIR_Radix Example.
- Serial Graphic LCD Example.
- Sound Example.
- Touch Screen demonstration example.
- Measuring temperature with DS1820 and sending data to a PC via serial communication.
- Sending data to a PC via serial communication.
- Creating delay with timer 0.
- Creating delay with timer 1.
- Creating delay with timer 2.
- Sending data from PS/2 keyboard.
- One-wire communication with temperature sensor.
- Reading date and time from PCF8583 Real Time Clock.
- Examples of reading and writing data to MMC or CF cards.
- FFT Example.
- Serial Ethernet Example.
Package Details
The dsPICPRO4 development tool is packed in the protective box along with the relevant documentation and product CD. This box is very resistant to all kinds of damages and shocks. Note: Touch Screen, Pencil, DS1820, Serial Cable and GLCD are not included in the price. The package contains:
- dsPICPRO4 development system.
- 2x16 Character LCD.
- USB cable.
- CD with software, drivers and examples in C, BASIC and Pascal.
- Printed documentation.
This product is shipped with fully functional demo versions of mikroC PRO for dsPIC30/33 and PIC24, mikroBasic PRO for dsPIC30/33 and PIC24 and mikroPascal PRO for dsPIC30/33 and PIC24 compilers. All demo versions includes a hex output limited to 6k of program words. These compilers come with examples for easy prototype development.
Special Offers
This product is available with several special offers. These special offers has been carefully created to suite your needs, no matter if you are beginner or experienced user. Save time, money and get complete development solution. Purchasing one of these offers will get you an significant discount. Following special offers are available for this product:
Accessory Boards
Accessory Boards were designed to allow students or engineers to easily exercise and explore the capabilities of the various microcontrollers with peripheral devices such as: ADC, DAC, CAN, Ethernet, IrDA, MP3, RS485 and many more. Click on the image below to find accessory boards that suits your needs. Note: Accessory Boards are sold separately.
dsPICPRO4 User Manual [7.57MB]
Installing USB drivers [420.79KB]
mikroProg Suite for PIC User Manual [2.92MB]
dsPICFlash Programmerare Handbok [5.17MB]
