AVR Development Tools

EasyAVR6 is a full-featured development system for AVR microcontrollers. The system features a fast USB 2.0 programmer and many peripheral modules such as COG, port expander, MENU and 4x4 keypads etc.
[more info]

The BIGAVR6 development system supports 64- and 100-pin AVR microcontrollers. It comes with the ATMEGA128 microcontroller. The system features a USB 2.0 programmer and many peripheral modules such as touch panel controller, CAN, RTC etc. [more info]

Fastest AVR microcontroller family on the market allow you to build rich multimedia applications. Board comes with ATXmega128A1. [more info]

MINI-AT Board is a small development board featuring ATmega328 microcontroller, USB-UART module, reset circuit and indicator LEDs. It is shipped preprogrammed with an open source bootloader from AVRdude. Two versions available: 5V and 3.3V power supply voltage. [more info]

The AVRPLC16 v6 is an AVR-based PLC system used to develop industrial, home or office control devices. The system features GSM(GPRS), GPS communication, 16 relays, 8 optocoupled inputs, RS485, RS232, Ethernet, MMC/SD and many more. [more info]

The AVRprog2 is a fast and easy to use USB 2.0 programmer for AVR microcontrollers from Atmel. Unlike programmers whose operation is based on bootloaders, the AVRprog2 provides an external programming of MCUs so that the entire memory is available. [more info]

Ready for AVR Board is the board for development of microcontroller applications using 40-pin AVR MCUs. It comes with ATmega16 connected to 8MHz crystal oscillator. It contains four IDC10 headers, USB-UART module, prototyping area and a power supply circuit. [more info]

Start USB for AVR Board is a small development board featuring Atmel® AT90USB162 device with fast USB 2.0 support. It features connection pads for all MCU pins, as well as two prototyping areas for placing additional electronic components. [more info]

Ready for XMEGA Board is the best solution for fast development of various microcontroller applications. It comes with ATXmega128A1. It contains double-row headers for all available MCU ports, USB-UART module, prototyping area and a power supply. [more info]

The XMEGA-Ready Board is a prototype board that features the ATxmega128A1 device connected to an 8Mhz oscillator. The board also features a USB support via FT232R. It is ideal for exploring and desiging devices using new Atmel^® XMEGA^™ A1 family. [more info]

The mikroXMEGA Board is a small-package prototype board with the ATxmega128A1 device operating at 8Mhz. It features a USB to serial UART interface FT232R that can be easily connected to a PC. Explore new XMEGA in an easy way. [more info]

The EasyAVR5A development system is a full-featured development system for 8-, 14-, 20-, 28- and 40-pin AVR MCUs from Atmel. The system comes with an ATMEGA16. It also includes an easy-to-use USB 2.0 programmer and a touch panel controller. [more info]

The BIGAVR2 development system supports the latest 64- and 80-pin AVR microcontrollers from Atmel. It comes with an ATMEGA128 operating at 10MHz. The board features a USB 2.0 programmer and a touch panel controller for easy prototype development. [more info]

The EasyAVR6 PROTO Board is a high quality PCB prototype board. It solves your prototype problems by offering a complete, cost-effective solution. Connect this board to your prototype board via an IDC10 connector. [more info]

The AVR-Ready1 Board is a prototype board for 40-pin AVR microcontrollers. The board features a USB to serial UART interface device FT232R. [more info]

The AVR-Ready2 Board is a prototype board for 28-pin AVR microcontrollers. The board features a USB to serial UART interface device FT232R. [more info]

BIGAVR6 TQFP MCU Cards come with a 64- and 100-pin AVR microcontroller in TQFP package soldered on them. There are an on-board oscillator and pads connected to the microcontroller pins.  [more info]

Empty BIGAVR6 MCU Cards support 64- and 100-pin AVR microcontrollers in TQFP package. You should solder a microcontroller as well as other components you need on these PCBs. [more info]

BIGAVR MCU Cards have an AVR MCU soldered on them. They are compatible with our BIGAVR development systems and can be easily connected to them via a two-line connector. Their bottom has a ground plane for noise prevention. [more info]

64- and 100-pin Empty BIGAVR MCU Cards are compatible with our BIGAVR development systems. You should solder your MCU and other components you need. They are connected to a system via a two-line connector. Their bottom has a ground plane for noise prevention. [more info]

AT90PWM to DIP40B Adapters are used to convert a DIP40 (AVR) socket into an AT90PWM (AVR) compatible socket. You can solder AT90PWM1, AT90PWM2 or AT90PWM3 microcontroller on this board to get DIP40 support. These adapters provide an easy and fast work. [more info]

The UNI-DS6 development system supports PIC, AVR, 8051, ARM, PSoC and dsPIC microcontrollers with a large number of peripherals. If you want to give another microcontroller a try you just have to switch the card and continue working in the same development environment. [more info]