dsPIC Development Tools

The EasydsPIC6 is a full-featured development system for 18-, 28- and 40-pin dsPIC30F devices. The system features a USB 2.0 programmer with mikroICD and many peripherals such as Piezo speaker, COG, port expander, MENU and 4x4 keypads etc. [more info]

mikroProg™ is a fast USB 2.0 programmer with mikroICD hardware In-Circuit Debugger. Smart engineering allows mikroProg to support PIC10, PIC12, PIC16, PIC18, dsPIC30/33, PIC24 and PIC32 devices in a single programmer. It supports 574 microcontrollers from Microchip. [more info]

The BIGdsPIC6 is a development system for 64- and 80-pin dsPIC30F devices. Board is delivered with a MCU card that contains dsPIC30F6014A. The system features a USB 2.0 programmer with mikroICD and many peripheral modules such as Piezo speaker, EEPROM, FTDI, RTC, CAN, etc. [more info]

The dsPICPRO4 supports the latest 64- and 80-pin dsPIC30F microcontrollers from Microchip. It comes with a dsPIC30F6014A. The system includes an USB 2.0 programmer, mikroICD (In-Circuit Debugger), touch panel controller, CAN, RS485, DAC and RTC. [more info]

EasydsPIC4A is a full-featured development system that supports the latest 18-, 28- and 40-pin dsPIC30F MCUs. It comes with the dsPIC30F4013 microcontroller. The board features a USB 2.0 programmer, mikroICD (In-Circuit Debugger), touch panel controller etc. [more info]

The dsPICprog with mikroICD is a USB 2.0 programmer with in-circuit debugger used for programming dsPIC30F MCUs from Microchip. Unlike programmers whose operation is based on bootloaders, this one is used for external programming so that the entire memory is available. [more info]

The UNI-DS6 development system supports PIC, AVR, 8051, ARM, PSoC and dsPIC microcontrollers with a large number of peripherals. If you want to give another microcontroller a try you just have to switch the card and continue working in the same development environment. [more info]

dsPIC MCU Cards support 64- and 80-pin dsPIC microcontrollers and are compatible with our dsPIC PRO development systems. They come with the dsPIC30F microcontroller. Due to a two-line connector, these cards can be easily connected to development systems. [more info]

Empty dsPIC MCU Cards support 80- and 64-pin dsPIC MCUs and are compatible with our dsPIC PRO development systems. Solder your MCU and other electronic components on these cards. They can be easily connected to a development system [more info]

BIGdsPIC TQFP MCU Cards come with an 80-pin dsPIC30F device in TQFP package soldered on them. There are an on-board oscillator and pads connected to the microcontroller pins. [more info]

Empty 64- and 80-pin TQFP MCU Cards support dsPIC30F devices in TQFP package. You should solder your own microcontroller and other components you need on these cards. They are also compatible with the BIGdsPIC6 development system. [more info]

The dsPIC-Ready1 Board is a USB supported prototype board as it features an on-board USB to serial UART interface device FT232R. The board supports 40-pin dsPIC30F microcontrollers such as dsPIC30F3011, dsPIC30F4011, etc. [more info]

The dsPIC-Ready2 Board is a USB supported prototype board as it features an on-board USB to serial UART interface device FT232R. The board features extension pin headers for 40-pin dsPIC microcontrollers such as dsPIC30F3014, dsPIC30F4013, etc.  [more info]

The dsPIC-Ready3 Board is a USB supported prototype board as it features an on-board USB to serial UART interface device FT232R. The board supports 28-pin dsPIC30F microcontrollers.  [more info]

The dsPIC-Ready4 Board is a USB supported prototype board as it features an on-board USB to serial UART interface device FT232R. The board supports 28-pin dsPIC30F microcontrollers such as dsPIC30F1010, dsPIC30F2020, etc. [more info]