PIC Development Tools

EasyPIC v7 is the seventh generation of our famous PIC development board. It is the product of accumulated knowledge over the past 10 years, and it’s state of the art of design, functionality and quality. Board comes with PIC18F45K22 device. [more info]

EasyPIC PRO v7 is a full-featured development board for high pin-count 8-bit PIC® microntrollers. It contains many on-board modules necessary for development variety of applications, including graphics, Ethernet, USB, data logging and other. [more info]

The EasyPIC6 is a full-featured development system for PIC microcontrollers. It comes with the PIC16F887 microcontroller. The system includes a USB 2.0 programmer with mikroICD and many peripheral modules such as COG, port expander, MENU and 4x4 keypads etc. [more info]

mikroProg™ is a fast USB 2.0 programmer with mikroICD hardware In-Circuit Debugger. Smart engineering allows mikroProg to support PIC10, PIC12, PIC16, PIC18, dsPIC30/33, PIC24 and PIC32 devices in a single programmer. It supports 574 microcontrollers from Microchip. [more info]

The BIGPIC6 development system supports 64- and 80-pin PIC microcontrollers. It comes with the PIC18F8520 microcontroller. The system features a USB 2.0 programmer with mikroICD and many peripheral modules such as port expander, MENU keypad, serial EEPROM etc. [more info]

The EasyLV-18F v6 development system supports 40-, 28- and 20-pin PIC18J and PIC18K microcontroller families from Microchip. It comes with a PIC18F45K20. The system features a USB 2.0 programmer with mikroICD and many peripheral modules such as Serial RAM, EEPROM, COG Display, etc. [more info]

The LV18F v6 development system supports 44-, 64-, 80- and 100-pin PIC18FxxJxx microcontrollers. It comes with a PIC18F87J60. The system features a USB 2.0 programmer with mikroICD and many peripheral modules such as MENU keypad, serial RAM, serial EEPROM etc. [more info]

The UNI-DS6 development system supports PIC, AVR, 8051, ARM, PSoC and dsPIC microcontrollers with a large number of peripherals. If you want to give another microcontroller a try you just have to switch the card and continue working in the same development environment. [more info]

The PICPLC16 v6 is a PLC system used to develop industrial, home and office control devices. The system features GSM/GPRS communication, 16 relays, 16 optocoupled inputs, RS485, RS232, serial Ethernet, etc.  [more info]

The PICPLC4 v6 is a PLC system used to develop industrial, home and office control devices. The system features GSM/GPRS communication, 4 relays, RS232, Ethernet, real-time clock, etc. [more info]

SmartGLCD 240x128 is a full-featured board for easy development of embedded graphical applications using PIC18F8722 device that is connected to 8Mhz oscillator circuit. Board features 240x128 GLCD (with RA6963C) with RGB backlight and a Touch Screen. [more info]

If you are a beginner, you can start building your first multimedia applications on PIC18F87J50 microcontroller. [more info]

The PICFlash with mikroICD support is a programmer with in-circuit debugger used for programming PIC FLASH MCUs from Microchip. In addition to standard FLASH MCUs, this programmer can also be used for programming the latest PIC MCUs. [more info]

The 18FJprog with mikroICD support is a USB 2.0 programmer with In-Circuit Debugger used for programming PIC 18FxxJxx MCUs from Microchip. The programmer is specifically designed for In-Circuit Serial Programming (ICSP). [more info]

Ready for PIC is the board for development of microcontroller applications using 28- and 40-pin PIC MCUs. It comes with PIC16F887 connected to 11.0592MHz crystal oscillator. It contains four IDC10 headers, USB-UART module, prototyping area and a power supply circuit. [more info]

Start USB for PIC Board is a small development board featuring Microchip® PIC18F2550 device with fast USB 2.0 support. It features connection pads for all MCU pins, as well as two prototyping areas for placing additional devices and components. It can be used as a standalone device. [more info]

The PIC-Ready1 Board is a prototype board for 28- and 40-pin PIC microcontrollers. The board features a USB support with an on-board USB to serial UART interface device FT232R.  [more info]

The PIC-Ready2 Board is a prototype board for 18-pin PIC microcontrollers. The board features a USB support with an on-board USB to serial UART interface device FT232R.
[more info]

The BIGPIC5 development system supports the latest 64- and 80-pin PIC microcontrollers from Microchip. It comes with a PIC18F8520. The system includes a USB 2.0 programmer, mikroICD (In-Circuit Debugger), touch panel controller, CAN and RS485 communication modules, DAC and RTC. [more info]

The LV 18FJ development system supports the latest 64-, 80- and 100-pin PIC18FxxJxx microcontrollers from Microchip. It comes with the PIC18F87J60 and includes an USB 2.0 programmer, mikroICD (In-Circuit Debugger), touch panel and MMC/SD. [more info]

The EasyPIC6 PROTO Board is a high quality PCB prototype board. It solves your prototype problems by offering a complete, cost-effective solution. Connect your EasyPIC6 development board to this board via an IDC10 connector. [more info]

The BIGPIC6 PROTO Board is a high quality PCB prototype board. It solves your prototype problems by offering a complete, cost-effective solution. Connect your BIGPIC6 development board to this board via an IDC10 connector. [more info]

The EasyPIC5 PROTO Board is a high quality PCB prototype board. It is connected to the EasyPIC5 development system via an IDC10 connector. The board offers complete and cost effective solutions, thus enabling you to easily solve your prototype problems. [more info]

The LV18FJ Experimental board is used for programming LV18FJ MCU Cards. This board makes the programming process easier. You just need to place a card correctly and start programming your microcontroller. [more info]

BIGPIC6 TQFP MCU Cards come with an 80-pin PIC microcontroller in TQFP package soldered on them. There are an on-board oscillator and 80 pads connected to the microcontroller pins. [more info]

Empty BIGPIC6 MCU Cards support 64- and 80-pin PIC microcontrollers in TQFP package. You should solder a microcontroller as well as other components you need on this board.  [more info]

LV18F v6 TQFP MCU Cards come with an 80-pin Microchip PIC18J device in TQFP package soldered on them. There are an on-board oscillator and 80 pads connected to the microcontroller pins. [more info]

Empty LV18F v6 MCU Cards support 44-, 64-, 80- and 100-pin Microchip PIC18J device in TQFP package. You should solder your own microcontroller and components you want on these cards. They are compatible with the LV18F v6 development system. [more info]

PIC MCU Cards come with 80-pin PIC microcontrollers soldered on them. Due to a two-line connector, these cards can be easily connected to a development system. Their bottom is provided with a ground plane for noise prevention. [more info]

Empty BIGPIC MCU Cards support 80- and 64-pin PIC microcontrollers. You should solder your microcontroller and other electronic components on them. These cards can be easily connected to a development system via a two-line connector. [more info]

The PICFlash Experimental Board makes the process of programming MCUs easier. There are 8-, 10-, 14-, 18-, 28- and 40-pin DIP sockets provided on the board. There is also an on-board 40-pin ZIF Socket for easy handling of microcontroller. [more info]

LV18FJ MCU Cards come with an 80-pin PIC18FJ microcontroller in TQFP package soldered on them. There are an on-board oscillator and 80 pads connected to the microcontroller pins. [more info]

Empty LV 18FJ MCU Cards support 64-, 80- and 100-pin PIC18FxxJxx MCUs. You should solder your MCU and other electronic components. Due to a two-line connector, these cards can be easily connected to the development system. [more info]