Various Boards

The Keypad 4x4 Board features a small keypad with calculator-style arrangement of buttons and can be easily integrated into your prototype device. It is connected to your development system or prototype device via an IDC10 connector. [more info]

The EasyConnect Board is an accessory board that allows you to connect your prototype peripherals fast and easily using high quality on-board connectors. This board is useful in power and high-speed signal-handling applications. [more info]

The EasyInput Board is an effective and low-cost solution for adjusting input levels using a high quality DIP switch. It saves prototype board space and allows increased circuit density. It is connected to your prototype device via an IDC10 connector. [more info]

The EasyLED Board is an effective and low-cost solution for visual indication of output signals. LEDs are used for visual indication purposes. This board can be connected to a prototype device via an IDC10 connector.
[more info]

The EasyPULL Board features pull-up resistors (10KΩ or 1KΩ). It can be used to steer an input pin to a known state if no input is present. On-board jumpers are used to set pull-up/pull-down resistor for each pin connected to a prototype device. [more info]

The Relay4 Board is small-sized board with 4 Relays (each supports currents up to 16A). Also, it contains ULN2804 (high-current Darlington arrays) for relays driving and IDC10 connector for easier connecting with development or prototype board. [more info]

The DIP to PLCC44 Adapter Board is an effective and low-cost board for DIP to PLCC44 conversion. You just have to plug a PIC into this adapter. After the programming process is finished, you can remove it from the adapter. [more info]

The Port Expander Board is an accessory board that includes a 16-bit I/O expander MCP23S17. This expander employs SPI(tm) clock up to 10 MHz. The board is ideal for expanding number of microcontroller pins on your prototype device. [more info]

The EasyPROTO Board solves your connecting problems by offering a complete, cost-effective solution. The board is connected to a prototype board via an IDC10 connector. [more info]

The EasyConnect2 Board allows you to connect peripherals to your development system fast and easily by using high-quality small connectors provided on the board. This board is useful in power and high-speed signal handling applications. [more info]

Flat Cable 1 allows you to easily connect your prototype board via IDC10 connectors. This cable solves your connecting problems by offering a complete and cost-effective solution.  
[more info]

The SmartADAPT MINI Board is used to rearrange 8 I/O port pins just by moving on-board jumpers in order to meet your specified needs. The board can be connected to a development system or prototype device via an IDC10 connector. [more info]

The SmartADAPT Board allows you to rearrange 8 I/O pins just by moving on-board jumpers in order to meet your specified needs. The board solves your connecting problems by offering a complete and cost-effective solution. [more info]

The SmartADAPT2 Board is an accessory board used to rearrange 16 I/O pins just by moving on-board jumpers in order to meet your specified needs. This board is ideal for configuring your prototype device I/O pins. [more info]

The SmartADAPT2 with GLCD/LCD Connector Board is used to rearrange 16 I/O pins just by moving on-board jumpers in order to meet your specified needs. It features a jumper for selecting input voltage and configurable GLCD/LCD connector. [more info]

The SmartPROTO Board offers an effective and low-cost solution for connecting your prototype device to a PCB prototype board. It is connected to a development system or prototype device via an IDC10 connector. [more info]

The Light to Frequency 2 Board enables you to connect your development board to a light-to-frequency converter. The board features a programmable light-to-frequency converter TSL230BR and is connected to a prototype device via an IDC10 connector.  [more info]

The Light to Frequency Board enables you to use a light to frequency converter in your prototype device or development board. The board features a programmable light-to-frequency converter TSL230BR. [more info]

The Digital Potentiometer Board includes a SPI Interfaced single-channel digital potentiometer MCP41010. The board enables you to set potentiometer values from 0 to 10 kΩ. It comes with many simple and ready-to-use examples. [more info]

The Motion Sensor Board includes the AMN11112 sensor that is capable of detecting changes in infrared radiation in the surrounding. Such changes are caused by changing temperature due to movements made by a person or objects. [more info]

The EasyTEST Board is an ideal solution for connecting your prototype or development board to oscilloscope or other monitoring devices. This board can be connected to your development system or prototype device via an IDC10 connector. [more info]

The RFid Reader Board offers an effective and low-cost solution for connecting your prototype device to an RFid reader. The RFid reader can be used in a variety of applications. Use this board to create RFid supported devices in a jiffy. [more info]

PS/2 Connector Boards are accessory boards used to connect PS/2 devices to a prototype device. There is a PS/2 connector provided on the board. It enables PS/2 communication. [more info]

USB Connector Boards feature a USB connector that allows easy connection between a prototype device and USB devices. As soon as you establish connection between these two devices you are ready to transmit and receive data via USB communication. [more info]

The ICD2 Connector Board is used to connect the ICD2 / ICD3 programmer from Microchip with your development board or prototype device. The board solves your prototyping problems by offering a cost-effective solution. [more info]

The mikroBuffer Board is ideal for buffering analog signals. The board features a unity gain operational amplifier MCP6284 and can be connected to your prototype device via an IDC10 connector. [more info]

The mikroBuffer PROTO Board is used to buffer analog signals. There is a unity gain operational amplifier MCP6284 provided on the board. [more info]

PROTO Connect Boards are used to connect a prototype device to external modules via a screw terminal. External connection is enabled via the screw terminal. Components available on the board are clearly marked, which makes connection easy. [more info]

PROTO Connect 2 Boards feature two on-board screw-terminals that enable your prototype device to be easily connected to external modules. [more info]

The EasyPS/2 Board enables your development board to be connected to a PS/2 device. There is an on-board PS/2 connector used to establish PS/2 communication. The board also features a DIP switch used to configure board connections.   [more info]

The Bipolar Stepper Motor Driver Board enables you to add stepper motor control to your applications. There is an on-board microstepping motor driver A3967SLB. The board supports Mixed, Fast and Slow Current-Decay Modes. [more info]

mikroProg to ICD2 & ICD3 is an adapter board which allows you to connect mikroProg™ programmer and In-Circuit debugger to target board where only ICD2/3 connector is available for programming. [more info]

DIGIPOT Click Board is an accessory board in mikroBus™ form factor. It features a single-channel digital potentiometer MCP4161 with 8-bit resolution (256 wiper steps) and industry-standard SPI serial interface. [more info]

EXPAND Click is an accessory board in mikroBus™ form factor. It includes a 16-bit I/O expander MCP23S17 with SPI clock speeds up to 10 MHz for higher throughput applications. [more info]

LightHz Click is an accessory board in mikroBus form factor with TSL230BR programmable light-to-frequency converter. The output can be either a pulse train or a square wave (50% duty cycle) with frequency directly proportional to light intensity. [more info]