Time Measuring Boards

Add reliable timer, alarm and real-time clock functionality to your application. Let these boards take care of it, so you can exploit your microcontroller’s precious clock cycles on something more important.

RTC Board

RTC board enables you to use a real-time-clock and calendar in your applications. It features an PCF8583 that keeps track of the current time even when the microcontroller is turned off. The real-time clock is driven by a special battery that is not connected to the normal power supply. The board serves as an extension of development boards which need real time data for their operation but can also be used as a part of some other devices if required. It comes with the relevant schematic and many ready-to-use examples.

RTC Board Examples [190.63KB] RTC User Manual [3.24MB]

$21.00

Top

RTC2 Board

The RTC2 Board features the DS1307 serial real-time clock (RTC). It is a low-power, full binary-coded decimal (BCD) clock/calendar plus 56 bytes of NV SRAM. Timekeeping operation continues even when the power supply goes off as it is then powered from the backup supply. The RTC2 Board serves as extension of existing development boards in applications where Real Time data is required. The board comes with the appropriate schematic and software examples.

RTC2 Examples [378.70KB] RTC2 User Manual [966.86KB]

$21.00

Top

RTC PROTO Board

RTC PROTO board enables you to use a real-time-clock and calendar in your applications. It features an PCF8583 that keeps track of the current time even when the microcontroller is turned off. The real-time clock is driven by a special battery that is not connected to the normal power supply. It is easily connected to standard prototyping boards.

RTC Board Examples [190.63KB] RTC PROTO User Manual [964.59KB]

$21.00

Top

RTC2 PROTO Board

The RTC2 Board features the DS1307 serial real-time clock (RTC). It is a low-power, full binary-coded decimal (BCD) clock/calendar plus 56 bytes of NV SRAM. Timekeeping operation continues even when the power supply goes off as it is then powered from the backup supply. It is easily connected to standard prototyping boards. The board comes with the appropriate schematic and software examples.

RTC2 PROTO User Manual [961.24KB] RTC2 Examples [378.70KB]

$21.00

Top

RTC Click

RTC Click is an accessory board in mikroBus™ form factor. It features the PCF8583 serial real-time clock (RTC). It is a low-power, full binary-coded decimal (BCD) clock/calendar. Board uses I2C interface for communication and features a 3V/230mA lithium battery as a backup power supply which ensures that timekeeping operation continues even when the main power supply goes OFF. Board is set to use 3.3V power supply by default. Solder PWR SEL SMD jumper to 5V position if used with 5V systems.

RTC Click User Manual [425.31KB] RTC Click Examples [153.17KB] mikroBUS™ specification [142.87KB]

$21.00

Top

RTC2 click

RTC2 Click is an accessory board in mikroBus™ form factor. It features the DS1307 serial real-time clock (RTC). It is a low-power, full binary-coded decimal (BCD) clock/calendar with programmable square-wave output signal. Board uses I2C interface for communication, and can only use 5V power supply. Board features a 3V/230mA lithium battery as a backup power supply which ensures that timekeeping operation continues even when the main power supply goes OFF.

RTC2 Click User Manual [422.55KB] RTC2 Click Examples [141.67KB] mikroBUS™ specification [142.87KB]

$21.00

Top