Development Tools

EasyPIC v7 is the seventh generation of our famous PIC development board. It is the product of accumulated knowledge over the past 10 years, and it’s state of the art of design, functionality and quality. Board comes with PIC18F45K22 device. [more info]

EasyPIC PRO v7 is a full-featured development board for high pin-count 8-bit PIC® microntrollers. It contains many on-board modules necessary for development variety of applications, including graphics, Ethernet, USB, data logging and other. [more info]

The EasyPIC6 is a full-featured development system for PIC microcontrollers. It comes with the PIC16F887 microcontroller. The system includes a USB 2.0 programmer with mikroICD and many peripheral modules such as COG, port expander, MENU and 4x4 keypads etc. [more info]

mikroProg™ is a fast USB 2.0 programmer with mikroICD hardware In-Circuit Debugger. Smart engineering allows mikroProg to support PIC10, PIC12, PIC16, PIC18, dsPIC30/33, PIC24 and PIC32 devices in a single programmer. It supports 574 microcontrollers from Microchip. [more info]

The BIGPIC6 development system supports 64- and 80-pin PIC microcontrollers. It comes with the PIC18F8520 microcontroller. The system features a USB 2.0 programmer with mikroICD and many peripheral modules such as port expander, MENU keypad, serial EEPROM etc. [more info]

The EasyLV-18F v6 development system supports 40-, 28- and 20-pin PIC18J and PIC18K microcontroller families from Microchip. It comes with a PIC18F45K20. The system features a USB 2.0 programmer with mikroICD and many peripheral modules such as Serial RAM, EEPROM, COG Display, etc. [more info]

The LV18F v6 development system supports 44-, 64-, 80- and 100-pin PIC18FxxJxx microcontrollers. It comes with a PIC18F87J60. The system features a USB 2.0 programmer with mikroICD and many peripheral modules such as MENU keypad, serial RAM, serial EEPROM etc. [more info]

The UNI-DS6 development system supports PIC, AVR, 8051, ARM, PSoC and dsPIC microcontrollers with a large number of peripherals. If you want to give another microcontroller a try you just have to switch the card and continue working in the same development environment. [more info]

The PICPLC16 v6 is a PLC system used to develop industrial, home and office control devices. The system features GSM/GPRS communication, 16 relays, 16 optocoupled inputs, RS485, RS232, serial Ethernet, etc.  [more info]

The PICPLC4 v6 is a PLC system used to develop industrial, home and office control devices. The system features GSM/GPRS communication, 4 relays, RS232, Ethernet, real-time clock, etc. [more info]

SmartGLCD 240x128 is a full-featured board for easy development of embedded graphical applications using PIC18F8722 device that is connected to 8Mhz oscillator circuit. Board features 240x128 GLCD (with RA6963C) with RGB backlight and a Touch Screen. [more info]

If you are a beginner, you can start building your first multimedia applications on PIC18F87J50 microcontroller. [more info]

The PICFlash with mikroICD support is a programmer with in-circuit debugger used for programming PIC FLASH MCUs from Microchip. In addition to standard FLASH MCUs, this programmer can also be used for programming the latest PIC MCUs. [more info]

The 18FJprog with mikroICD support is a USB 2.0 programmer with In-Circuit Debugger used for programming PIC 18FxxJxx MCUs from Microchip. The programmer is specifically designed for In-Circuit Serial Programming (ICSP). [more info]

Ready for PIC is the board for development of microcontroller applications using 28- and 40-pin PIC MCUs. It comes with PIC16F887 connected to 11.0592MHz crystal oscillator. It contains four IDC10 headers, USB-UART module, prototyping area and a power supply circuit. [more info]

Start USB for PIC Board is a small development board featuring Microchip® PIC18F2550 device with fast USB 2.0 support. It features connection pads for all MCU pins, as well as two prototyping areas for placing additional devices and components. It can be used as a standalone device. [more info]

The PIC-Ready1 Board is a prototype board for 28- and 40-pin PIC microcontrollers. The board features a USB support with an on-board USB to serial UART interface device FT232R.  [more info]

The PIC-Ready2 Board is a prototype board for 18-pin PIC microcontrollers. The board features a USB support with an on-board USB to serial UART interface device FT232R.
[more info]

The BIGPIC5 development system supports the latest 64- and 80-pin PIC microcontrollers from Microchip. It comes with a PIC18F8520. The system includes a USB 2.0 programmer, mikroICD (In-Circuit Debugger), touch panel controller, CAN and RS485 communication modules, DAC and RTC. [more info]

The LV 18FJ development system supports the latest 64-, 80- and 100-pin PIC18FxxJxx microcontrollers from Microchip. It comes with the PIC18F87J60 and includes an USB 2.0 programmer, mikroICD (In-Circuit Debugger), touch panel and MMC/SD. [more info]

The EasyPIC6 PROTO Board is a high quality PCB prototype board. It solves your prototype problems by offering a complete, cost-effective solution. Connect your EasyPIC6 development board to this board via an IDC10 connector. [more info]

The BIGPIC6 PROTO Board is a high quality PCB prototype board. It solves your prototype problems by offering a complete, cost-effective solution. Connect your BIGPIC6 development board to this board via an IDC10 connector. [more info]

The EasyPIC5 PROTO Board is a high quality PCB prototype board. It is connected to the EasyPIC5 development system via an IDC10 connector. The board offers complete and cost effective solutions, thus enabling you to easily solve your prototype problems. [more info]

The LV18FJ Experimental board is used for programming LV18FJ MCU Cards. This board makes the programming process easier. You just need to place a card correctly and start programming your microcontroller. [more info]

BIGPIC6 TQFP MCU Cards come with an 80-pin PIC microcontroller in TQFP package soldered on them. There are an on-board oscillator and 80 pads connected to the microcontroller pins. [more info]

Empty BIGPIC6 MCU Cards support 64- and 80-pin PIC microcontrollers in TQFP package. You should solder a microcontroller as well as other components you need on this board.  [more info]

LV18F v6 TQFP MCU Cards come with an 80-pin Microchip PIC18J device in TQFP package soldered on them. There are an on-board oscillator and 80 pads connected to the microcontroller pins. [more info]

Empty LV18F v6 MCU Cards support 44-, 64-, 80- and 100-pin Microchip PIC18J device in TQFP package. You should solder your own microcontroller and components you want on these cards. They are compatible with the LV18F v6 development system. [more info]

PIC MCU Cards come with 80-pin PIC microcontrollers soldered on them. Due to a two-line connector, these cards can be easily connected to a development system. Their bottom is provided with a ground plane for noise prevention. [more info]

Empty BIGPIC MCU Cards support 80- and 64-pin PIC microcontrollers. You should solder your microcontroller and other electronic components on them. These cards can be easily connected to a development system via a two-line connector. [more info]

The PICFlash Experimental Board makes the process of programming MCUs easier. There are 8-, 10-, 14-, 18-, 28- and 40-pin DIP sockets provided on the board. There is also an on-board 40-pin ZIF Socket for easy handling of microcontroller. [more info]

LV18FJ MCU Cards come with an 80-pin PIC18FJ microcontroller in TQFP package soldered on them. There are an on-board oscillator and 80 pads connected to the microcontroller pins. [more info]

Empty LV 18FJ MCU Cards support 64-, 80- and 100-pin PIC18FxxJxx MCUs. You should solder your MCU and other electronic components. Due to a two-line connector, these cards can be easily connected to the development system. [more info]

The EasydsPIC6 is a full-featured development system for 18-, 28- and 40-pin dsPIC30F devices. The system features a USB 2.0 programmer with mikroICD and many peripherals such as Piezo speaker, COG, port expander, MENU and 4x4 keypads etc. [more info]

mikroProg™ is a fast USB 2.0 programmer with mikroICD hardware In-Circuit Debugger. Smart engineering allows mikroProg to support PIC10, PIC12, PIC16, PIC18, dsPIC30/33, PIC24 and PIC32 devices in a single programmer. It supports 574 microcontrollers from Microchip. [more info]

The BIGdsPIC6 is a development system for 64- and 80-pin dsPIC30F devices. Board is delivered with a MCU card that contains dsPIC30F6014A. The system features a USB 2.0 programmer with mikroICD and many peripheral modules such as Piezo speaker, EEPROM, FTDI, RTC, CAN, etc. [more info]

The dsPICPRO4 supports the latest 64- and 80-pin dsPIC30F microcontrollers from Microchip. It comes with a dsPIC30F6014A. The system includes an USB 2.0 programmer, mikroICD (In-Circuit Debugger), touch panel controller, CAN, RS485, DAC and RTC. [more info]

EasydsPIC4A is a full-featured development system that supports the latest 18-, 28- and 40-pin dsPIC30F MCUs. It comes with the dsPIC30F4013 microcontroller. The board features a USB 2.0 programmer, mikroICD (In-Circuit Debugger), touch panel controller etc. [more info]

The dsPICprog with mikroICD is a USB 2.0 programmer with in-circuit debugger used for programming dsPIC30F MCUs from Microchip. Unlike programmers whose operation is based on bootloaders, this one is used for external programming so that the entire memory is available. [more info]

The UNI-DS6 development system supports PIC, AVR, 8051, ARM, PSoC and dsPIC microcontrollers with a large number of peripherals. If you want to give another microcontroller a try you just have to switch the card and continue working in the same development environment. [more info]

dsPIC MCU Cards support 64- and 80-pin dsPIC microcontrollers and are compatible with our dsPIC PRO development systems. They come with the dsPIC30F microcontroller. Due to a two-line connector, these cards can be easily connected to development systems. [more info]

Empty dsPIC MCU Cards support 80- and 64-pin dsPIC MCUs and are compatible with our dsPIC PRO development systems. Solder your MCU and other electronic components on these cards. They can be easily connected to a development system [more info]

BIGdsPIC TQFP MCU Cards come with an 80-pin dsPIC30F device in TQFP package soldered on them. There are an on-board oscillator and pads connected to the microcontroller pins. [more info]

Empty 64- and 80-pin TQFP MCU Cards support dsPIC30F devices in TQFP package. You should solder your own microcontroller and other components you need on these cards. They are also compatible with the BIGdsPIC6 development system. [more info]

The dsPIC-Ready1 Board is a USB supported prototype board as it features an on-board USB to serial UART interface device FT232R. The board supports 40-pin dsPIC30F microcontrollers such as dsPIC30F3011, dsPIC30F4011, etc. [more info]

The dsPIC-Ready2 Board is a USB supported prototype board as it features an on-board USB to serial UART interface device FT232R. The board features extension pin headers for 40-pin dsPIC microcontrollers such as dsPIC30F3014, dsPIC30F4013, etc.  [more info]

The dsPIC-Ready3 Board is a USB supported prototype board as it features an on-board USB to serial UART interface device FT232R. The board supports 28-pin dsPIC30F microcontrollers.  [more info]

The dsPIC-Ready4 Board is a USB supported prototype board as it features an on-board USB to serial UART interface device FT232R. The board supports 28-pin dsPIC30F microcontrollers such as dsPIC30F1010, dsPIC30F2020, etc. [more info]

The LV 24-33 v6 is a development system that supports 44-, 64-, 80- and 100-pin PIC24F, PIC24H and dsPIC33F MCUs. It comes with a PIC24FJ128GA010. It features a USB 2.0 programmer with mikroICD (In-Circuit Debugger), touch panel controller, MMC/SD card slot, etc. [more info]

The Easy24-33 v6 development system supports 14-, 18-, 20- and 28-pin PIC24 and dsPIC33 microcontrollers from Microchip. It comes with a PIC24F16KA102. The system features a USB 2.0 programmer with mikroICD and many peripheral modules such as Touch Sense, Serial RAM, EEPROM, etc. [more info]

This mikromedia offers USB connectivity and richness of features provided with PIC24FJ256GB110 microcontroller. [more info]

Fast DSP core will enable you to write graphic-intensive signal processing applications with ease on dsPIC33FJ256GP710A device. [more info]

mikroProg™ is a fast USB 2.0 programmer with mikroICD hardware In-Circuit Debugger. Smart engineering allows mikroProg to support PIC10, PIC12, PIC16, PIC18, dsPIC30/33, PIC24 and PIC32 devices in a single programmer. It supports 574 microcontrollers from Microchip. [more info]

The LV24-33A development system supports 64-, 80- and 100-pin PIC24F, PIC24H and dsPIC33F microcontrollers from Microchip. It comes with the PIC24FJ128GA010 microcontroller. The board includes a USB 2.0 programmer, mikroICD (In-Circuit Debugger) and a touch panel controller. [more info]

The LvPICFlash with mikroICD support is a USB 2.0 programmer with in-circuit debugger (mikroICD) used for programming dsPIC33 and PIC24 microcontrollers from Microchip. It is powered through a single USB port on your PC and is specifically designed for in-circuit programming. [more info]

Empty LV24-33 MCU Cards are compatible with our LV 24-33 development systems. You should solder your MCU and other electronic components on these cards. They are connected to a development system via a two-line connector. Their bottom has a ground plane for noise prevention.   [more info]

LV24-33 MCU Cards have either dsPIC33F or PIC24 MCU soldered on them. They are compatible with our LV 24-33 development systems. These cards can be easily connected to a development system via a two-line connector. [more info]

The LV24-33A Experimental Board is used for programming LV24-33 MCU cards. It enables you to program microcontrollers in an easy way. You just have to place an MCU card on the board and start programming.       
[more info]

LV 24-33 v6 TQFP MCU Cards come with 64-, 80- or 100-pin dsPIC33 or PIC24 microcontroller in TQFP package soldered on them. There are an on-board oscillator and pads connected to the microcontroller pins. [more info]

Empty 100-pin TQFP MCU Cards support PIC24 and dsPIC33 microcontrollers in TQFP package. You can solder your own microcontroller and other components you need on these cards. [more info]

The LV-32MX v6 is a full-featured development system that supports 64- and 100-pin PIC32MX microcontrollers from Microchip. The board features a fast USB 2.0 programmer and many peripherals such as TFT color display 320x240 with touch screen, audio codec, MMC/SD, serial Flash, etc. [more info]

mikroProg™ is a fast USB 2.0 programmer with mikroICD hardware In-Circuit Debugger. Smart engineering allows mikroProg to support PIC10, PIC12, PIC16, PIC18, dsPIC30/33, PIC24 and PIC32 devices in a single programmer. It supports 574 microcontrollers from Microchip. [more info]

The PIC32MX4 MultiMedia Board is a compact development system for multimedia applications. The board is compatible with the latest PIC32MX4 series. This tool provides a development platform featuring PIC32MX4 devices.    
[more info]

The MultiMedia Board for PIC32MX7 is a compact development system for multimedia applications featuring the latest PIC32MX7 series. This tool provides a large number of peripherals such as 320x240 TFT Color Display with Touch Screen, Stereo Codec, Accelerometer, Ethernet, etc. [more info]

Build games, image sliders, miniature operating systems and other demanding applications with mighty PIC32MX460F512L device. [more info]

MINI-32 is a small development board containing PIC32MX534F064H microcontroller. It operates on 3.3V power supply. On-board voltage regulator allows the board to be powered directly from USB cable. Comes preprogrammed with USB bootloader. [more info]

LV-32MX v6 TQFP MCU Cards come with a 100-pin PIC32 microcontroller in TQFP package soldered on them. There are also an oscillator and 100 pads connected to the microcontroller pins. [more info]

Empty LV-32MX v6 MCU Cards support 100-pin PIC32 devices in TQFP package. You should solder your own microcontroller as well as other electronic components on these boards. [more info]

LV-32MX is a full featured development system that supports 64- and 100-pin PIC32MX microcontrollers from Microchip. It comes with the PIC32MX360F256L microcontroller. There are a USB 2.0 programmer and a touch panel controller provided on the board.
[more info]

Empty PIC32 MCU Cards provide support for 64- and 100-pin PIC32 devices. You should solder your own microcontroller and other electronic components you need on them. These cards can be easily connected to a development system via a two-line connector. [more info]

PIC32 MCU Cards come with a 100-pin PIC32 device soldered on them. Due to a two-line connector, these cards can be easily connected to a development system. Their bottom is provided with a ground plane for noise prevention. [more info]

EasyAVR6 is a full-featured development system for AVR microcontrollers. The system features a fast USB 2.0 programmer and many peripheral modules such as COG, port expander, MENU and 4x4 keypads etc.
[more info]

The BIGAVR6 development system supports 64- and 100-pin AVR microcontrollers. It comes with the ATMEGA128 microcontroller. The system features a USB 2.0 programmer and many peripheral modules such as touch panel controller, CAN, RTC etc. [more info]

Fastest AVR microcontroller family on the market allow you to build rich multimedia applications. Board comes with ATXmega128A1. [more info]

MINI-AT Board is a small development board featuring ATmega328 microcontroller, USB-UART module, reset circuit and indicator LEDs. It is shipped preprogrammed with an open source bootloader from AVRdude. Two versions available: 5V and 3.3V power supply voltage. [more info]

The AVRPLC16 v6 is an AVR-based PLC system used to develop industrial, home or office control devices. The system features GSM(GPRS), GPS communication, 16 relays, 8 optocoupled inputs, RS485, RS232, Ethernet, MMC/SD and many more. [more info]

The AVRprog2 is a fast and easy to use USB 2.0 programmer for AVR microcontrollers from Atmel. Unlike programmers whose operation is based on bootloaders, the AVRprog2 provides an external programming of MCUs so that the entire memory is available. [more info]

Ready for AVR Board is the board for development of microcontroller applications using 40-pin AVR MCUs. It comes with ATmega16 connected to 8MHz crystal oscillator. It contains four IDC10 headers, USB-UART module, prototyping area and a power supply circuit. [more info]

Start USB for AVR Board is a small development board featuring Atmel® AT90USB162 device with fast USB 2.0 support. It features connection pads for all MCU pins, as well as two prototyping areas for placing additional electronic components. [more info]

Ready for XMEGA Board is the best solution for fast development of various microcontroller applications. It comes with ATXmega128A1. It contains double-row headers for all available MCU ports, USB-UART module, prototyping area and a power supply. [more info]

The XMEGA-Ready Board is a prototype board that features the ATxmega128A1 device connected to an 8Mhz oscillator. The board also features a USB support via FT232R. It is ideal for exploring and desiging devices using new Atmel^® XMEGA^™ A1 family. [more info]

The mikroXMEGA Board is a small-package prototype board with the ATxmega128A1 device operating at 8Mhz. It features a USB to serial UART interface FT232R that can be easily connected to a PC. Explore new XMEGA in an easy way. [more info]

The EasyAVR5A development system is a full-featured development system for 8-, 14-, 20-, 28- and 40-pin AVR MCUs from Atmel. The system comes with an ATMEGA16. It also includes an easy-to-use USB 2.0 programmer and a touch panel controller. [more info]

The BIGAVR2 development system supports the latest 64- and 80-pin AVR microcontrollers from Atmel. It comes with an ATMEGA128 operating at 10MHz. The board features a USB 2.0 programmer and a touch panel controller for easy prototype development. [more info]

The EasyAVR6 PROTO Board is a high quality PCB prototype board. It solves your prototype problems by offering a complete, cost-effective solution. Connect this board to your prototype board via an IDC10 connector. [more info]

The AVR-Ready1 Board is a prototype board for 40-pin AVR microcontrollers. The board features a USB to serial UART interface device FT232R. [more info]

The AVR-Ready2 Board is a prototype board for 28-pin AVR microcontrollers. The board features a USB to serial UART interface device FT232R. [more info]

BIGAVR6 TQFP MCU Cards come with a 64- and 100-pin AVR microcontroller in TQFP package soldered on them. There are an on-board oscillator and pads connected to the microcontroller pins.  [more info]

Empty BIGAVR6 MCU Cards support 64- and 100-pin AVR microcontrollers in TQFP package. You should solder a microcontroller as well as other components you need on these PCBs. [more info]

BIGAVR MCU Cards have an AVR MCU soldered on them. They are compatible with our BIGAVR development systems and can be easily connected to them via a two-line connector. Their bottom has a ground plane for noise prevention. [more info]

64- and 100-pin Empty BIGAVR MCU Cards are compatible with our BIGAVR development systems. You should solder your MCU and other components you need. They are connected to a system via a two-line connector. Their bottom has a ground plane for noise prevention. [more info]

AT90PWM to DIP40B Adapters are used to convert a DIP40 (AVR) socket into an AT90PWM (AVR) compatible socket. You can solder AT90PWM1, AT90PWM2 or AT90PWM3 microcontroller on this board to get DIP40 support. These adapters provide an easy and fast work. [more info]

The UNI-DS6 development system supports PIC, AVR, 8051, ARM, PSoC and dsPIC microcontrollers with a large number of peripherals. If you want to give another microcontroller a try you just have to switch the card and continue working in the same development environment. [more info]

The EasyPSoC4 is a full-featured development system for 8-, 20-, 28- and 48-pin Cypress PSoC® MCUs. It comes with a CY8C27643. The board features a fast and easy-to-use USB 2.0 programmer and a touch panel controller. [more info]

The PSoCprog2 is a USB 2.0 programmer used for programming PSoC MCUs from Cypress. Unlike programmers whose operation is based on bootloaders, this one provides the external programming of microcontrollers so that the entire memory is available. [more info]

PSoC MCU Cards have PSoC microcontrollers soldered on them. These cards are compatible with our EasyPSoC development systems. They can be easily connected to a development system via a two-line connector. Their bottom has a ground plane for noise prevention. [more info]

Empty PSoC MCU Cards support a wide range of PSoC MCUs. They are compatible with our EasyPSoC development systems. You should solder your microcontroller and other components you need on them. These cards can be easily connected to development systems via a two-line connector. [more info]

The UNI-DS6 development system supports PIC, AVR, 8051, ARM, PSoC and dsPIC microcontrollers with a large number of peripherals. If you want to give another microcontroller a try you just have to switch the card and continue working in the same development environment. [more info]

The Easy8051 v6 is compatible with 14-, 16-, 20-, 28-, 40-pin PLCC44 and PLCC32 MCUs. It comes with an AT89S8253. The board has a USB 2.0 programmer and many peripherals such as COG, port expander, MENU and 4x4 keypads etc.  [more info]

The BIG8051 development system supports 100-pin Silabs 8051 microcontrollers. It comes with the c8051f040 microcontroller. The system is delivered with a Silabs USB 2.0 programmer and many peripheral modules such as Serial Ethernet, DAC, ADC etc. [more info]

The Easy 8051 v6 PROTO Board is a high quality PCB prototype board. Connect your Easy8051 v6 development board to this board via an IDC10 connector. The board solves your prototype problems by offering a complete and cost-effective solution. [more info]

The 8051prog2 is a USB 2.0 programmer used for programming 8051 microcontrollers from Atmel. Unlike programmers whose operation is based on bootloaders, this one provides the external programming of microcontrollers so that the entire memory is available. [more info]

The 8051-Ready Board is a prototype board with pin headers for 44-, 40- and 20-pin 8051 microcontrollers from Atmel. This board enables you to program microcontrollers easier. The board features a USB support with an on-board USB to serial UART interface device FT232R. [more info]

The UNI-DS6 development system supports PIC, AVR, 8051, ARM, PSoC and dsPIC microcontrollers with a large number of peripherals. If you want to give another microcontroller a try you just have to switch the card and continue working in the same development environment. [more info]

EasyMx PRO v7 for Stellaris® ARM® is a development board for Stellaris® ARM® Cortex-M3™ 32-bit devices. It contains many on-board modules necessary for development variety of applications, including multimedia, Ethernet, USB, CAN and other. [more info]

Develop your multimedia-rich application on high-performance LM3S9B95 - Stellaris® ARM® Cortex™-M3 device. [more info]

mikroProg™ for Stellaris® is a fast programmer and hardware debugger. Smart engineering allows mikroProg™ to support all Stellaris® ARM® Cortex™ M3 and M4 devices in a single programmer! It is supported in mikroElektronika ARM® compilers. [more info]

The EasyARM v6 development system supports the 64- and 144-pin ARM microcontrollers from NXP. It comes with the LPC2148. The board features a USB 2.0 programmer and a touch panel controller for easy prototype development. [more info]

If you demand great 32-bit performance, than this mikromedia board is perfect for you. It comes with LPC2148 ARM7 microcontroller. [more info]

The UNI-DS6 development system supports PIC, AVR, 8051, ARM, PSoC and dsPIC MCUs with a large number of peripherals. If you want to give another MCU a try you just have to switch the card and continue working in the same development environment. [more info]

The EasyARM development system supports the latest 64- and 144-pin ARM microcontrollers from NXP (former Philips). It comes with the LPC2148 microcontroller. The board features a USB 2.0 programmer and a touch panel controller. [more info]

The ARMFlash is a USB 2.0 programmer used for programming ARM microcontrollers from NXP (former Philips). Unlike programmers whose operation is based on bootloaders, this one provides the external programming of microcontrollers so that the entire memory is available. [more info]

The EasyARM Experimental Board is a high quality board designed by Mikroelektronika. It supports EasyARM MCU Cards and enables you to program your microcontrollers with ease. Place MCU Card inside socket and program it with ARMFlash programmer. [more info]

ARM MCU Cards can be easily connected to development systems through a two-line connector. The bottom of these cards is provided with a ground plane for noise prevention. [more info]

Empty ARM MCU Cards support 64- and 144-pin NXP ARM devices. You should solder your microcontroller and other electronic components you need on them. These cards can be easily connected to a development system via a two-line connector. [more info]

The SmartGM862 Board is a development board for the Telit’s GM862 GSM/GPRS module. The board includes an on-board switching power supply so that no additional power supply components are needed. An antenna is delivered with the board to provide a better quality of signal. [more info]

The SmartGM862-GPS Board is used for the Telit’s GM862-GPS module. The board has an on-board switching power supply so that no additional power supply components are needed. A GSM and active GPS antenna are delivered with the board to provide a better quality of signal. [more info]

The SmartSIM340Z Board is a development tool for the Simcom SIM340Z GSM/GPRS module. Stable switching power supply can be found on-board, so no additional components are needed. An antenna can be placed on-board to ensure best signal quality. [more info]

The SmartG100 Board is a uBlox Leon-G100 GSM/GPRS module development board. The switching power supply is available on-board, so that there is no need for additional components. An antenna is delivered with the board for a better signal quality. [more info]

The SmartTM1 Board is a full-featured development board for the Teltonika’s TM1 GSM/GPRS module. This tool features a stable switching power supply, so that there is no need for additional power supply components. In addition, an antenna can be placed on-board to provide a better signal quality. [more info]

The EasyGSM/GPRS is a development board for the SIM340Z module from Simcom. The SIM340Z provides GSM/GPRS performance for voice, SMS, Data and Fax in a small form factor. An antenna is delivered with the board to provide a better quality of signal.
[more info]

The EasyGSM/GPRS is a development board for the Telit's GM862 GSM/GPRS module. The GM862 is specifically designed for the OEM usage and portable data, voice and telematic applications. An antenna is delivered with the board to provide a better quality of signal.       
[more info]

The EasyGSM/GPRS is a development board for the Telit’s GM862-GPS module. The GM862-GPS module is specifically designed for the OEM usage and portable data, voice and GPS applications. An antenna is delivered on-board to provide a better quality of signal. [more info]

The SmartGSM/GPRS is a development tool that helps you understand GSM & GPRS technologies. Its intuitive design simply guides you through the learning process. An antenna is delivered with the board to provide a better quality of signal. [more info]

We would like to provide our customers with extra GSM/GPRS parts for development purposes. At present, we are offering components for several GSM/GPRS modules. Here you can find components you may need for your GSM/GPRS prototype devices.
[more info]

The EasyGSM/GPRS is a development board for the MC55 GSM/GPRS module from Siemens. The MC55 module is used for the worldwide GSM/GPRS operation. An antenna is delivered with the board to provide a better quality of signal. [more info]

The EasyGSM/GPRS TM2 is a development board for the TM2 module from Teltonika. This module is small and light. It enables your devices to be connected to the GSM/GPRS network. An antenna is delivered with the board to provide a better quality of signal. [more info]

The SIM Card Holder Board enables you to connect a prototype device to a SIM card. Connection can be established in a few simple steps. The board solves your prototyping problems by offering a complete and cost-effective solution. [more info]

The SmartGPS is a development tool that will help you understand GPS technologies. Connect GPS (Global Positioning System) to your PC or development board using the LEA-6S module. The intuitive design of SmartGPS guides you through the process of learning GPS. [more info]

GPS Click is an accessory board in mikroBus™ form factor. It’s a compact solution for adding GPS functionality to your device. It fetures LEA-6S, high performance u-blox 6 positioning engine. Board can be interfaced with a device through UART or I2C. [more info]

We would like to provide our customers with extra GPS parts for development purposes. At present, we are offering components for several GPS modules. Here you can find components you may need for your GPS prototype device. [more info]

We would like to provide our customers with extra development parts for development purposes. Now, we are offering components such as: LCD, GLCD, connectors etc. Here you can find all components you might need to develop your prototype device. [more info]

Here you can order additional microcontrollers for development purposes. At present, we are offering several microcontrollers such as PIC16F887, PIC18F8520, PIC18F4550, ATMEGA16, etc. [more info]

Flexible wire jumpers are used to connect components on your prototype board. They are also perfect for connecting your prototype device or development board quickly with other electronic components. We are offering several types of wire jumpers. [more info]

We would like to provide our customers with extra SOIC, SOP, TSSOP and SSOP adapters for development purposes. Professional and development adapters from mikroElektronika allow an easy and fast work. At present, we are offering several adapters for various SOIC, SOP, TSSOP and SSOP packages.          
[more info]

UNI-DS6 board is a full-featured universal development environment for 7 different microcontroller achitectures. This universal development station is equipped with many on-board modules which give you great power and flexibility when creating or testing your prototype. [more info]

The UNI-DS3 development system supports PIC, AVR, 8051, ARM, PSoC and dsPIC microcontrollers with a large number of peripherals. If you want to give another microcontroller a try you just have to switch the card and continue working in the same development environment. [more info]

ASLK PRO has been designed for undergraduate engineering students to perform analog lab experiments and provides a cost efficient platform for students to realize almost any analog system using general purpose ICs such as OP-Amps and analog multipliers. [more info]