Cypress PSoC development tool
USB 2.0 programmer on board !!!
System supports 8, 20, 28 and 48 pin microcontrollers (it comes with CY8C27643). Each jumper, element and pin is clearly marked on the board. It is possible to test most of the industrial needs on the system: temperature controllers, counters, timers etc.
EasyPSoC3 is easy to use Cypress PSoC development system. EasyPSoC3 has many features that makes
your development easy. You can choose between USB or External Power supply. EasyPSoC3
also supports Character LCD as well as Graphic LCD.
RS-232 communication with PC or another microcontroller.
System can be easily configured via clearly marked dip switches.
Digital thermometer DS1820 for measuring temperature from -55ºC to 125ºC.
Support for Microcontrollers in DIP8, DIP14, DIP18, DIP28 and DIP40 socket.
2 potentiometers are available for testing AD conversion and comparators.
Power Supply select - USB or external.
4 seven-segment digits in multiplex mode.
All pins are connected to ICD connectors for further connecting.
32 diodes for displaying states of all pins on the microcontroller at the same time.
R.T.C. - Real Time Clock for applications which need Real Time data.
32 buttons for program developing needs.
DIP switch for separating port A pins when they are used as A-D inputs.
Very fast USB 2.0 programmer on board.
LCD display plugs in via a connector on PC board.
Selectable contrast :GLCD or for LCD.
On the same connector user can connect GLCD or LCD in 8-bit mode.
External power supply can be DC or AC.
CAN module for communication with other microcontrollers.
LCD 2x16 in 8-bit mode.
GLCD - Graphic LCD.
Choose voltage level to be applied when a button is pressed (GND or +5V).
MMC\SD card slot - For MMC\SD memory cards.
Reset circuit.
Compact Flash card slot - For Compact Flash memory cards.
The Graphic LCD (GLCD) allows advanced visual messages to be displayed. The most commonly used graphic LCD has a screen resolution of 128x64 pixels.
When using a character LCD in 8-bit mode, the connector that is shared with the GLCD is used. The character LCD communicates with the MCU via a 8-bit data bus. The most commonly used LCD is 2x16 LCD.
The standard LCD is probably the most widely used data visualization component. Normally, it can display two lines of 16 alphanumeric characters, each made up of 5x7 pixels.
EasyPSoC3 development system is a full-featured development board for the Cypress PSoC microcontrollers. It was designed to allow students or engineers to easily exercise and explore the capabilities of the PSoC microcontrollers. It allows the PSoC microcontroller to be interfaced with external circuits to a broad range of the peripheral devices, allowing the user to concentrate just on the software. Figure on the right illustrates the first contact with the development system. On a silkscreen there are marks beside every component. These marks describe connection to microcontroller, operation modes, and some other useful notes. As a result, need for additional schematics is minimized, because all information are already on the board.
USB 2.0 on-board programmer - PSoCprog2: You will get the USB programmer which doesn't use boot loader or any similar way of programming. The whole PSoC memory and all pins are available to you. Aside from that, you will have state-of-the-art fast USB PSoC InSystem programmer for your future projects.
PSoCprog2 Programmer is driven and powered from a single USB port on your computer. No additional AC power adapter is needed. The programmer is recognized by Windows, which simplifies driver installation. The programmer board is specifically designed for In-Circuit Serial Programming (ICSP).
Drawings for all dev.system parts are simple and clear.
EasyPSoC3 development system.
USB cable.
Serial cable.
2x16 Character LCD.
DS1820 temperature sensor.
Printed Board Schematic.
CD with software, drivers and board schematic.
The Box is very resistant to shock and transport damage.
EasyPSoC3 comes with printed board schematic.
All credit card and personal details are kept secure, and our customer list is not disclosed to any third party. Most shipments are sent within 48 hours of your order.
$169.00 USD
EasyPSoC 3 Development System
$17.00 USD
Graphic LCD 128x64 dots
$18.00 USD
Additional MCU board with PSoC CY8C27643 Microcontroller
If you have any problems with CC processing please inform us: office@mikroe.com
If you want to pay directly to our bank account please contact us: office@mikroe.com