The system supports 64 and 100 pin PIC32MX microcontrollers (it comes with PIC32MX360F256L).
High-Performance USB 2.0 On-Board ProgrammerState-Of-The-Art very fast USB 2.0 programmer on-board with simplified driver installation.
Get comfortable with LV32MX development toolIt was designed to allow students or engineers to easily exercise and explore the capabilities of the PIC32MX microcontrollers.
The smart choice for PIC32MX microcontrollersLV32MX allows the PIC32MX MCU to be interfaced with external circuits to a broad range of the peripheral devices, allowing the user to concentrate just on the software.
User-Friendly PIC32MX development systemLV32MX development system is a full-featured development board for the PIC32MX microcontrollers.
Double RS-232 communication with PC or another microcontroller.
System can be easily configured via clearly marked dip switches.
MMC/SD card connector for data logging application.
The system supports 64 and 100 pin PIC32MX microcontrollers.
2 potentiometers are available for testing AD conversion and comparators.
Power Supply select - USB or external.
3.3 MCU Power Supply - Power Supply is near microcontroller for more stable work.
All pins are connected to IDC connectors for further connecting.
85 diodes for displaying states of all pins on the microcontroller at the same time.
Pull up or Pull down port defining.
85 buttons for program developing needs.
ICD2 connector for external In-circuit debugger.
LCD display plugs in via a connector on-board.
Digital thermometer DS1820 for measuring temperature from -55ºC to 125ºC.
Choose voltage level to be applied when a button is pressed (GND or +3.3V).
Touch screen controller with connector is available on-board.
GLCD - Graphic display 128x64.
Reset circuit
The Graphic LCD (GLCD) allows advanced visual messages to be displayed. The most commonly used graphic LCD has a screen resolution of 128x64 pixels.
Touch screen is display overlay which have the ability to display and receive information on the same display. The effect of such overlay allows a display to be used as an input device.
The standard LCD is probably the most widely used data visualization component. Normally, it can display two lines of 16 alphanumeric characters, each made up of 5x7 pixels.
Touchscreens are popular in heavy industry and in other situations, such as museum displays or room automation, where keyboards and mouse do not allow a satisfactory, intuitive, rapid, or accurate interaction by the user with the display's content. Such displays can be attached to computers or, as terminals, to networks. Touchscreens also have made these devices more usable.
Touch Screen Specification [43KB]
USB 2.0 on-board programmer - PIC32Flash: You will get the USB programmer which doesn't use boot loader or any similar way of programming. The whole PIC32MX memory and all pins are available to you. Aside from that, you will have state-of-the-art fast USB PIC32MX InSystem programmer for your future projects. PIC32MX Programmer is driven and powered from a single USB port on your computer. No additional AC power adapter is needed. The programmer is recognized by Windows, which simplifies driver installation. The programmer board is specifically designed for In-Circuit Serial Programming (ICSP).
PIC32Flash Programmer Software for Windows [1.7MB]
PIC32Flash Programmer Drivers for Windows [1.6MB]
LV32MX Examples [685KB]
Demonstration of library function for AD conversion. 10 bits result is displayed on PORTD and PORTF.
Demonstration of how to use USART library routines.
Demonstration of using interrupts.
Demonstration of using TMR1 for interrupts. Program toggles LEDs on PORTB.
Demonstration of a simple 'Hello World' project. It turns on/off diodes connected to PORTC. It uses bitwise negation to toggle PORTC pins.
Demonstration of how to use the Watchdog timer.
Drawings for all dev.system parts are simple and clear.
LV32MX development system.
USB cable.
Printed LV32MX Board Schematic.
CD with software, drivers, board schematic and examples in C.
The Box is very resistant to shock and transport damage.
NOTE: Touch Screen, Pencil, DS1820, MMC/SD Card, LCD, Serial Cable and GLCD are not included in the price !!!
LV32MX comes with printed board schematic.
The PCF8583 is a clock (calendar) with I2C bus interface.[more]
The MCP3204 is 4-Channel 12 Bit A/D Converter.[more]
DAC Board - The MCP4921 is DAC with SPI interface.[more]
CAN Board - The MCP2551 is CAN Transceiver. [more]
CAN2 Board - The MCP2515 on-board. [more]
Accel Board - The ADXL330 is on-board. [more]
Keypad can also be integrated as part of prototype. [more]
EEPROM is typically used to store prototype parameters. [more]
CF Board - Easy way to use CF Cards. [more]
ENC 28J60 is 10BASE-T stand alone Ethernet Controller. [more]
MCP 23S17 is the only 16-bit Input / Output expander. [more]
EasyConnect Connects your peripherals easy and fast. [more]
EasyInput - DIP switch is used to customize the behavior.[more]
Digital Pot Board MCP41010 SPI Interfaced digital pot.[more]
MAX7219 SPI Interfaced, LED Display Drivers.[more]
RS485 Board - LTC485 is a low power transceiver. [more]
SmartMP3 Board Add MP3 to your prototype with VS1011e. [more]
Light To Freq Board Add light to frequency converter. [more]
Motion Sensor AMN11112 sensor detects movement changes. [more]
mikroDrive Interface your prototype with power loads. [more]
All credit card and personal details are kept secure, and our customer list is not disclosed to any third party. Most shipments are sent within 48 hours of your order. 2Checkout.com is an authorized reseller of goods and services provided by mikroElektronika.
$149.00 USD
LV32MX Development System
$24.00 USD
MCU card with PIC32MX360F256L
$24.00 USD
Graphic LCD 128x64 with TouchPanel
$9.80 USD
Character LCD 2x16 with blue backlight
$17.00 USD
Graphic LCD 128x64 dots
$7.00 USD
TouchPanel
$1.50 USD
Serial Cable
If you have any problems with CC processing please inform us: office@mikroe.com
If you want to pay directly to our bank account please contact us: office@mikroe.com