System supports 64, 80 and 100 pin PIC24F, PIC24H, dsPIC33F microcontrollers (it comes with PIC24FJ96GA010).
High-Performance USB 2.0 On-Board ProgrammerState-Of-The-Art very fast USB 2.0 programmer on-board with simplified driver installation
The smart choice for PIC24F, PIC24H, dsPIC33F MCU debuggingmikroICD is a highly effective tool for Real-Time debugging on a hardware level.
Get comfortable with LV24-33A development toolIt was designed to allow students or engineers to easily exercise and explore the capabilities of the PIC24F, PIC24H, dsPIC33F microcontrollers.
User-Friendly PIC24F, PIC24H, dsPIC33F development systemLV24-33A development system is a full-featured development board for the PIC24F, PIC24H, dsPIC33F microcontrollers.
Double RS-232 communication with PC or another microcontroller.
System can be easily configured via clearly marked dip switches.
MMC/SD card connector for data logging application.
System supports 64, 80 and 100 pin PIC24F/24H/dsPIC33F MCU's.
2 potentiometers are available for testing AD conversion and comparators.
Power Supply select - USB or external.
3.3 MCU Power Supply - Power Supply is near microcontroller for more stable work.
All pins are connected to IDC connectors for further connecting.
85 diodes for displaying states of all pins on the microcontroller at the same time.
Pull up or Pull down port defining.
85 buttons for program developing needs.
ICD2 connector for In circuit debugger.
LCD display plugs in via a connector on-board.
Very fast USB 2.0 programmer on board.
Choose voltage level to be applied when a button is pressed (GND or +3.3V).
Touch screen controller with connector is available on-board.
GLCD - Graphic display 128x64.
Reset circuit
The Graphic LCD (GLCD) allows advanced visual messages to be displayed. The most commonly used graphic LCD has a screen resolution of 128x64 pixels.
Touch screen is display overlay which have the ability to display and receive information on the same display. The effect of such overlay allows a display to be used as an input device.
The standard LCD is probably the most widely used data visualization component. Normally, it can display two lines of 16 alphanumeric characters, each made up of 5x7 pixels.
Touchscreens are popular in heavy industry and in other situations, such as museum displays or room automation, where keyboards and mouse do not allow a satisfactory, intuitive, rapid, or accurate interaction by the user with the display's content. Such displays can be attached to computers or, as terminals, to networks. Touchscreens also have made these devices more usable.
Touch Screen Specification [43KB]
3 in 1 Development Tool - Development Board + USB 2.0 on-board LV 24-33-Programmer + mikro ICD on-board: mikro ICD is a highly effective tool for Real-Time debugging on a hardware level. The ICD debugger enables you to execute a mikroC/mikroPascal/mikroBasic program on a host PIC24/dsPIC33 microcontroller and view variable values, Special Function Registers (SFR), memory and EEPROM as the program is running. LV 24-33-Programmer: The microcontroller is connected to the LV 24-33 programmer via 5 lines, two of which are +3.3V and GND. Unlike programmers whose operation is based on bootloads, LV 24-33 programs the microcontroller externally so that the entire memory is available for the program.
LvPICFLASH Programmer Software for Windows [1.2MB]
LvPICFLASH Programmer Drivers for Windows [1.6MB]
mikroPascal for dsPIC examples [978KB]
mikroBasic for dsPIC examples [979KB]
mikroC for dsPIC examples [1.2MB]
A beginner? Worry not. Easy-to-learn BASIC syntax, advanced compiler features, built-in routines, and many practical examples we have provided allow a quick start in programming dsPIC. [more]
Comprehensive, stand-alone Pascal compiler for dsPIC MCUs. Develop your applications in intuitive and friendly Pascal environment, using many advanced features and practical examples. [more]
All the power and flexibility provided by ANSI C, with the most advanced IDE on the market. A perfect match. Plenty practical examples and a comprehensive documentation. [more]
AD conversion and displaying on LCD.
AD conversion and displaying on LED
diodes in binary form.
AD conversion and send conversion result via USART.
Timer 0 and time measuring.
Examples for SPI communication.
Examples for CAN communication.
Examples for Sound generation.
Sending and receiving data over Ethernet.
Examples for SPI Port Expander.
Interrupt upon port B state change.
Detection of button pressed on portB.
Printing text on LCD.
Diodes blinking on port B.
Display text and images on Graphic LCD.
Examples for I2C communication.
Examples for RS485 communication.
Examples for sending and receiving data using Manchester Code.
Examples for Sinusoid generation.
Examples for SPI Graphic LCD.
Sending data to the PC via serial
communication.
Creating delay with timer 0.
Creating delay with timer 1.
Sending data from PS/2 keyboard.
Read date and time from PCF8583 RTC Real Time Clock.
Examples for reading and writing data to MMC or CF cards.
Touch Screen demonstration example.
Examples for Toshiba T6963 Graphic LCD.
Drawings for all dev.system parts are simple and clear.
LV24-33A development system.
USB cable.
Printed LV24-33A Board Schematic.
CD with software, drivers, board schematic and examples in BASIC, Pascal and C.
The Box is very resistant to shock and transport damage.
NOTE: Touch Screen, Pencil, DS1820, MMC/SD Card, LCD, Serial Cable and GLCD are not included in the price !!!
LV24-33A comes with printed board schematic.
The PCF8583 is a clock (calendar) with I2C bus interface.[more]
The MCP3204 is 4-Channel 12 Bit A/D Converter.[more]
DAC Board - The MCP4921 is DAC with SPI interface.[more]
CAN Board - The MCP2551 is CAN Transceiver. [more]
CAN2 Board - The MCP2515 on-board. [more]
Accel Board - The ADXL330 is on-board. [more]
Keypad can also be integrated as part of prototype. [more]
EEPROM is typically used to store prototype parameters. [more]
CF Board - Easy way to use CF Cards. [more]
ENC 28J60 is 10BASE-T stand alone Ethernet Controller. [more]
MCP 23S17 is the only 16-bit Input / Output expander. [more]
EasyConnect Connects your peripherals easy and fast. [more]
EasyInput - DIP switch is used to customize the behavior.[more]
Digital Pot Board MCP41010 SPI Interfaced digital pot.[more]
MAX7219 SPI Interfaced, LED Display Drivers.[more]
RS485 Board - LTC485 is a low power transceiver. [more]
SmartMP3 Board Add MP3 to your prototype with VS1011e. [more]
Light To Freq Board Add light to frequency converter. [more]
Motion Sensor AMN11112 sensor detects movement changes. [more]
mikroDrive Interface your prototype with power loads. [more]
All credit card and personal details are kept secure, and our customer list is not disclosed to any third party. Most shipments are sent within 48 hours of your order. 2Checkout.com is an authorized reseller of goods and services provided by mikroElektronika.
$23.00 USD
Additional MCU card with PIC24FJ96GA010-PF
$24.90 USD
Additional MCU card with dsPIC33FJ128GP710-PF
$24.00 USD
Graphic LCD 128x64 with TouchPanel
$9.80 USD
Character LCD 2x16 with blue backlight
$17.00 USD
Graphic LCD 128x64 dots
$7.00 USD
TouchPanel
$1.50 USD
Serial Cable
If you have any problems with CC processing please inform us: office@mikroe.com
If you want to pay directly to our bank account please contact us: office@mikroe.com