Sensory VRStamp development tool
USB 2.0 programmer on board !!!
System supports VR Stamp (it comes with VRStamp module). Each jumper, element and pin is clearly marked on the board. It is possible to test most of the voice recognition needs on the system.
The VRStamp enables exciting hands-free applications at very low system costs, with little more than a low cost microphone, speaker, and crystal required for a complete application. There are also examples for C compiler.
More info on Sensory technologies:
http://www.sensoryinc.com/
NOTE: LCD 2x16 Character, Serial Cable and Compact Flash card are not included in the price !!!
RS-232 communication with PC or another microcontroller.
System can be easily configured via clearly marked dip switches.
Amplifier - Amplifier for speaker
Support for VR Stamp modules in DIP40 socket.
R.T.C. - Real Time Clock for applications which need Real Time data.
Power Supply select - USB or external.
Speaker - Speaker system for testing voice recognition applications.
All pins are connected to ICD connectors for further connecting.
24 leds for displaying states of all pins on the microcontroller at the same time.
Pull up or Pull down port defining.
24 buttons for program developing needs.
DIP switch for separating port 2 pins.
Very fast USB 2.0 programmer on board.
LCD display plugs in via a connector on PC board.
Selectable contrast :GLCD or for LCD.
Microphone - Microphone for voice input.
External power supply can be DC or AC.
Choose voltage level to be applied when a button is pressed (GND or +3.3V).
CF card slot - For Compact Flash memory cards.
Reset circuit
Audio Out - Connect your speaker to Easy-RSC4x.
Our latest VRStamp Flash Programmer is driven and powered from a single USB port on your computer. No additional AC power adapter is needed. The programmer is recognized by Windows, which simplifies driver installation.
The chip also supports Sensory's SX synthesis that enables products to contain over five minutes of compressed audio, multiple speaker-independent and speaker-dependent vocabularies, speaker verification, and all application code - all on a single IC.
The standard LCD is probably the most widely used data visualization component. Normally, it can display two lines of 16 alphanumeric characters, each made up of 5x7 pixels.
Easy-VR Stamp development system is a full-featured development board for the Sensory VR Stamp modules. It was designed to allow students or engineers to easily exercise and explore the capabilities of the VR Stamp voice recognition modules. It allows the VR Stamp modules to be interfaced with external circuits to a broad range of the peripheral devices, allowing the user to concentrate just on the software. Figure on the left illustrates the first contact with the development system. On a silkscreen there are marks beside every component. These marks describe connection to voice recognition modules, operation modes, and some other useful notes. As a result, need for additional schematics is minimized, because all information are already on the board.
USB 2.0 on-board programmer - VrStampFlash: You will get the USB programmer which doesn't use boot loader or any similar way of programming. The whole VR Stamp memory and all pins are available to you. Aside from that, you will have state-of-the-art fast USB VR Stamp In-System programmer for your future projects.
VRStamp Flash software and drivers for Windows [1.2MB]
Drivers for VRStamp Flash software [1.6MB]
Easy-VRStamp Manual [1.42MB]
[mirror]
Easy-VRStamp schematic [Available Soon]
Installing USB drivers [452KB]
RSC-4x mikroC - All the power and flexibility provided by ANSI C, with the most advanced IDE on the market. A perfect match. Plenty practical examples and a comprehensive documentation. [more]
Music (Sensory example on using FluentChip Library).
Clock (Sensory example on using FluentChip Library)
Example for power management with oscillator #2 running.
Example for User abort handler for record/play.
Illustrates the use of Sensory's SX speech technology.
Example for User abort handler for SX.
Demo of Touch Tone technology.
Example for Compact Flash library.
Demonstration of using interrupts in RSC4X-mikroC.
Demonstration on Working with the RTC Module and Software I2C routines.
Led_Blinking (a simple "Hello World" example).
Demonstration of working with standard C-library.
Demonstration of some standard C library routines
Demonstration of working with LCD library.
Demonstration of working with Soft_SPI library.
Drawings for all dev.system parts are simple and clear.
Easy-VRStamp development system.
USB cable.
Printed Board Schematic.
CD with software, drivers, board schematic and examples in C.
The Box is very resistant to shock and transport damage.
NOTE: LCD 2x16 Character, Serial Cable and Compact Flash card are not included in the price !!!
Easy-VRStamp comes with printed board schematic.
All credit card and personal details are kept secure, and our customer list is not disclosed to any third party. Most shipments are sent within 48 hours of your order.
$129.00 USD
Easy-VR Stamp Development System (out of stock)
$39.95 USD
Additional VRStamp voice recognition module (out of stock)
$1.50 USD
Serial Cable
If you have any problems with CC processing please inform us: office@mikroe.com
If you want to pay directly to our bank account please contact us: office@mikroe.com