EasyPIC5 Development Board | mikroElektronika

$129.00 USD

Click below to see larger image

NOTE: Touch Screen, Pencil, DS1820, LCD and GLCD are not included in the price !!!

This development Board is ROHS compilant

The system supports 8, 14, 18, 20, 28 and 40 pin PIC® microcontrollers (it comes with a PIC16F887 - Enhanced Flash MCU).

High-Performance USB 2.0 On-Board Programmer
State-Of-The-Art very fast USB 2.0 programmer on-board with simplified driver installation

The smart choice for EasyPIC5 microcontrollers

The smart choice for PIC® mcu debugging
mikroICD is a highly effective tool for Real-Time debugging on a hardware level. The ICD debugger enables you to execute a program on a host PIC®.

EasyPIC5 is easy to use PIC® development system. EasyPIC5 has many features that makes your development easy. You can choose between USB or External Power supply.

Get comfortable with EasyPIC5 development tool
It was designed to allow students or engineers to easily exercise and explore the capabilities of the PIC® microcontrollers.

User-Friendly PIC® development system
EasyPIC5 development system is a full-featured development board for the PIC® microcontrollers.

RS-232 communication with PC or another microcontroller.

System can be easily configured via clearly marked DIP switches.

Digital thermometer DS1820 for measuring temperature from -55ºC to 125ºC.

Support for Microcontrollers in DIP8, DIP14, DIP18, DIP20, DIP28 and DIP40 socket.

2 potentiometers are available for testing multiple AD conversion and comparators.

Power Supply select - USB or external. Also there is a switch for turning on/off system.

4 seven-segment digits in multiplex mode.

All pins are connected to IDC connectors for further expansion.

36 diodes for displaying states of all pins on the microcontroller at the same time.

Pull up or Pull down port defining.

36 buttons for program developing needs.

DIP switch for separating port pins from Pull up or Pull down

Very fast USB 2.0 programmer on board.

LCD display plugs in via a connector on PC board.

Character LCD contrast potentiometer.

Touch screen controller with connector is available on-board.

External power supply can be DC or AC.

Crystal can be removed and replaced by another one.

GLCD - Graphic display 128x64.

All pins are marked on the back of the board.

Choose voltage level to be applied when a button is pressed (GND or +5V).

USB comm. connector for MCU with USB facilities.

Reset circuit.

PS2 connector makes possible direct connection between EasyPIC5 and PC keyboard.

The Graphic LCD (GLCD) allows advanced visual messages to be displayed. The most commonly used graphic LCD has a screen resolution of 128x64 pixels.

Touch screen is display overlay which have the ability to display and receive information on the same display. The effect of such overlay allows a display to be used as an input device.

The standard LCD is probably the most widely used data visualization component. Normally, it can display two lines of 16 alphanumeric characters, each made up of 5x7 pixels.

Touchscreens are popular in heavy industry and in other situations, such as museum displays or room automation, where keyboards and mouse do not allow a satisfactory, intuitive, rapid, or accurate interaction by the user with the display's content. Such displays can be attached to computers or, as terminals, to networks. Touchscreens also have made these devices more usable.
Touch Screen Specification [43KB]

PICFlash2 with mikroICD support Software

3 in 1 Development Tool - Development Board + USB 2.0 on-board programmer - PICFlash2 + mikro ICD on-board: mikro ICD is a highly effective tool for Real-Time debugging on a hardware level. The ICD debugger enables you to execute a mikroC/mikroPascal/mikroBasic program on a host PIC® microcontroller and view variable values, Special Function Registers (SFR), memory and EEPROM as the program is running. Also there is PICFlash USB 2.0 – an ultra fast USB 2.0 programmer for fast MCU programming. Continuing its tradition as the fastest PIC® programmer on the market, the new PICFlash with mikroICD now supports more PIC® MCUs giving the developer a wider choice of PIC® MCU for further prototype development.

PICFlash2 software for Windows [1.6MB]

Drivers for PICFlash2 software [1.2MB]

Examples for P16F887 [271KB]

Examples for P16F877A [163KB]

EasyPIC5 Manual [6.7MB]

EasyPIC5 Layout [2.0MB]

EasyPIC5 Key Features [3.5MB]

Installing USB drivers [368KB]

mikroICD Manual [2.7MB]

PICFlash2 Manual [3.1MB]

A beginner? Worry not. Easy-to-learn BASIC syntax, advanced compiler features, built-in routines, and the many practical examples that we have provided allow a quick start in programming PIC® [more]

Comprehensive, stand-alone Pascal compiler for PIC® MCUs. Develop your applications in an intuitive and friendly Pascal environment, using many advanced features and practical examples. [more]

All the power and flexibility provided by ANSI C, with the most advanced IDE on the market. A perfect match. Plenty of practical examples and a comprehensive documentation. [more]

7seg displays in multiplex mode.

AD conversion and displaying on LCD.

AD conversion and displaying on LED
diodes in binary form.

AD conversion and send conversion result via USART.

Timer 0 and time measuring.

Measuring temperature with DS1820
and displaying on LCD.

Examples for SPI communication.

Examples for CAN communication.

Examples for Sound generation.

Sending and receiving data over Ethernet.

Sending and receiving data over SPI Ethernet.

Measuring temperature with DS1820 and displaying on 7seg displays in multiplex mode.

Interrupt upon port B state change.

Detection of button pressed on portB.

Printing text on LCD.

Diodes blinking on port B.

Display text and images on Graphic LCD.

Examples for I2C communication.

Examples for RS485 communication.

Examples for sending and receiving data using Manchester Code.

Examples for Sinusoid generation.

Examples for SPI Graphic LCD.

Examples for SPI Port Expander.

Touch Screen demonstration example.

Measuring temperature with DS1820
and sending data to the PC via serial
communication.

Sending data to the PC via serial
communication.

Creating delay with timer 0.

Creating delay with timer 1.

Creating delay with timer 2.

Sending data from PS/2 keyboard.

One-wire communication with temperature sensor.

Read date and time from PCF8583 RTC Real Time Clock.

Examples for reading and writing data to MMC or CF cards.

Examples for Toshiba T6963 Graphic LCD.

Drawings for all dev.system parts are simple and clear.

Package contains:

EasyPIC5 development system.

USB cable.

Serial cable.

Printed Documentation.

CD with software, drivers and examples in C, BASIC and Pascal.

The Box is very resistant to shock and transport damage.

NOTE: Touch Screen, Pencil, DS1820, LCD and GLCD are not included in the price !!!

EasyPIC5 comes with printed documentation.This documentation includes: EasyPIC5 Manual, PICFlash with mikroICD Manual, mikroICD Manual.

The PCF8583 is a clock (calendar) with I2C bus interface.[more]

The MCP3204 is 4-Channel 12 Bit A/D Converter.[more]

DAC Board - The MCP4921 is DAC with SPI interface.[more]

CAN Board - The MCP2551 is CAN Transceiver. [more]

CAN2 Board - The MCP2515 on-board. [more]

IrDA Board - MCP2155 is IrDA Standard Controller. [more]

CF Board - Easy way to use CF Cards. [more]

RS485 Board - LTC485 is a low power transceiver. [more]

Accel Board - The ADXL330 is on-board. [more]

IrDA2 Board - MCP2120 is Infrared Encoder / Decoder. [more]

Keypad can also be integrated as part of prototype. [more]

EEPROM is typically used to store prototype parameters. [more]

MMC card is used as storage media for portable device. [more]

ENC 28J60 is 10BASE-T stand alone Ethernet Controller. [more]

MCP 23S17 is the only 16-bit Input / Output expander. [more]

EasyConnect Connects your peripherals easy and fast. [more]

EasyInput - DIP switch is used to customize the behavior.[more]

Production adapter allows easy and fast working.[more]

Digital Pot Board MCP41010 SPI Interfaced digital pot.[more]

MAX7219 SPI Interfaced, LED Display Drivers.[more]

SmartMP3 Board Add MP3 to your prototype with VS1001k. [more]

Light To Freq Board Add light to frequency converter. [more]

Motion Sensor AMN11112 sensor detects movement changes. [more]

mikroDrive Interface your prototype with power loads. [more]

All credit card and personal details are kept secure, and our customer list is not disclosed to any third party. Most shipments are sent within 48 hours of your order.