OUT OF STOCK !!! New version available here.
Microchip PIC development tool
USB 2.0 programmer on board !!!
System supports 8,14, 18, 28 and 40 pin microcontrollers (it comes with PIC16F877A). Each jumper, element and pin is clearly marked on the board. It is possible to test most of the industrial needs on the system: temperature controllers, counters, timers etc.
EasyPIC3 is easy to use Microchip PIC development system. EasyPIC3 has many features that makes
your development easy. You can choose between USB or External Power supply. EasyPIC3
also supports Character LCD as well as Graphic LCD.There are also examples for C, BASIC and Pascal compilers.
NOTE: LCD, GLCD, and DS1820 are not included in the price !!!
RS-232 communication with PC or another microcontroller.
System can be easily configured via clearly marked dip switches.
Digital thermometer DS1820 for measuring temperature from -55ºC to 125ºC.
Support for Microcontrollers in DIP8, DIP14, DIP18, DIP28 and DIP40 socket.
2 potentiometers are available for testing AD conversion and comparators.
Power Supply select - USB or external.
4 seven-segment digits in multiplex mode.
All pins are connected to ICD connectors for further connecting.
32 diodes for displaying states of all pins on the microcontroller at the same time.
Pull up or Pull down port defining.
32 buttons for program developing needs.
DIP switch for separating port A pins when they are used as A-D inputs.
Very fast USB 2.0 programmer on board.
LCD display plugs in via a connector on PC board.
Selectable contrast :GLCD or for LCD.
On the same connector user can connect GLCD or LCD in 8-bit mode.
External power supply can be DC or AC.
Crystal can be removed and replace with another one.
LCD 2x16 in 8-bit mode.
All pins are marked on the back of the board.
Choose voltage level to be applied when a button is pressed (GND or +5V).
USB comm. connector for MCU who have USB facilities.
Reset circuit.
PS2 connector makes possible direct connection between EasyPIC3 and PC keyboard.
The Graphic LCD (GLCD) allows advanced visual messages to be displayed. The most commonly used graphic LCD has a screen resolution of 128x64 pixels.
When using a character LCD in 8-bit mode, the connector that is shared with the GLCD is used. The character LCD communicates with the MCU via a 8-bit data bus. The most commonly used LCD is 2x16 LCD.
The standard LCD is probably the most widely used data visualization component. Normally, it can display two lines of 16 alphanumeric characters, each made up of 5x7 pixels.
EasyPIC3 development system is a full-featured development board for the Microchip PIC microcontrollers. It was designed to allow students or engineers to easily exercise and explore the capabilities of the PIC microcontrollers. It allows the PIC microcontroller to be interfaced with external circuits to a broad range of the peripheral devices, allowing the user to concentrate just on the software. Figure on the left illustrates the first contact with the development system. On a silkscreen there are marks beside every component. These marks describe connection to microcontroller, operation modes, and some other useful notes. As a result, need for additional schematics is minimized, because all information are already on the board.
USB 2.0 on-board programmer - PICFlash2: You will get the USB programmer which doesn't use boot loader or any similar way of programming. The whole PIC memory and all pins are available to you. If you do use boot loader, you have to leave some RAM memory for this propose, and it is generally not a such good idea if you program in Pascal, C or Basic. Also if you use low-level programming (5 VDC instead 12.5 VDC), note that you lose RB6 pin. PICFlash2 have voltage pump and generate 12.5 VDC so you have all pins for your project. Aside from that, you will have state-of-the-art fast USB PIC In-System programmer for your future projects.
A beginner? Worry not. Easy-to-learn BASIC syntax, advanced compiler features, built-in routines, and many practical examples we have provided allow a quick start in programming PIC. [more]
Comprehensive, stand-alone Pascal compiler for PIC MCUs. Develop your applications in intuitive and friendly Pascal environment, using many advanced features and practical examples. [more]
All the power and flexibility provided by ANSI C, with the most advanced IDE on the market. A perfect match. Plenty practical examples and a comprehensive documentation. [more]
7seg displays in multiplex mode.
AD conversion and displaying on LCD.
AD conversion and displaying on LED
diodes in binary form.
AD conversion and send conversion result via USART.
Timer 0 and time measuring.
Measuring temperature with DS1820
and displaying on LCD.
Examples for SPI communication.
Examples for CAN communication.
Examples for Sound generation.
Sending and receiving data over Ethernet.
Measuring temperature with DS1820 and displaying on 7seg displays in multiplex mode.
Interrupt upon port B state change.
Detection of button pressed on portB.
Printing text on LCD.
Diodes blinking on port B.
Display text and images on Graphic LCD.
Examples for I2C communication.
Examples for RS485 communication.
Examples for sending and receiving data using Manchester Code.
Examples for Sinusoid generation.
Measuring temperature with DS1820
and sending data to the PC via serial
communication.
Sending data to the PC via serial
communication.
Creating delay with timer 0.
Creating delay with timer 1.
Creating delay with timer 2.
Sending data from PS/2 keyboard.
One-wire communication with temperature sensor.
Read date and time from PCF8583 RTC Real Time Clock.
Examples for reading and writing data to MMC or CF cards.
Drawings for all dev.system parts are simple and clear.
EasyPIC3 development system.
USB cable.
Serial cable.
Printed manual.
CD with software, drivers, board schematic and examples in C, BASIC and Pascal.
The Box is very resistant to shock and transport damage.
EasyPIC3 comes with printed color manual with simple and clear drawings.
Real-Time clock (RTC) is a an electronic clock that keeps track of the current time even when the MCU is turned off. [more]
AD converters are used virtually everywhere where an analog signal has to be processed, stored, or transported in digital form.[more]
DAC is the interface between the abstract digital world and the analog real life. [more]
CAN was specifically designed to be robust in electromagnetically noisy environments and can utilize a differential balanced line. [more]
CAN 2 Board with SPI interface for all MCU which have SPI communication. [more]
The IrDA defines physical specs. protocol standards for the short range exchange of data over infrared light. [more]
Easy way to use Compact flash in your design and data acquisition. Record and analyze the information received by the microcontroller on compact flash cards. [more]
The RS485 standard allows the user to configure inexpensive local networks using twisted pair wire. [more]
Connect Accel. board to the development system, load an example and it's all set to start the measuring. [more]
Irda2 serve as wireless RS232 communication between two Microcontrollers. [more]
Keypad can also be integrated as part of prototype that contains a calculator-style arrangement of buttons. [more]
EEPROM is typically used to store prototype configuration parameters. [more]
MMC card is used as storage media for a portable device, in a form that can easily be removed for access by a PC. [more]
Ethernet is a large and diverse family of frame-based computer networking technologies for local area networks (LANs).[more]
All credit card and personal details are kept secure, and our customer list is not disclosed to any third party. Most shipments are sent within 48 hours of your order.
$24.00 USD
Book: PIC Microcontrollers
$15.00 USD
2x16 LCD and DS1820 temperature sensor
$17.00 USD
Graphic LCD 128x64 dots
If you have any problems with CC processing please inform us: office@mikroe.com
If you want to pay directly to our bank account please contact us: office@mikroe.com