Microchip dsPIC Development Board
System supports 18, 28 and 40 pin microcontrollers (it comes with dsPIC30F4013 general purpose mcu with internal 12 bit ADC).
High-Performance USB 2.0 On-Board ProgrammerState-Of-The-Art very fast USB 2.0 programmer on-board with simplified driver installation
The smart choice for dsPIC mcu debuggingmikroICD is a highly effective tool for Real-Time debugging on a hardware level. The ICD debugger enables you to execute a program on a host dsPIC.
Get comfortable with EasydsPIC4 development toolIt was designed to allow students or engineers to easily exercise and explore the capabilities of the dsPIC microcontrollers.
User-Friendly Microchip dsPIC development systemEasydsPIC4 development system is a full-featured development board for the Microchip dsPIC microcontrollers.
RS-232 communication with PC or another microcontroller.
DIP switch for separating port pins from Pull up or Pull down
System can be easily configured via clearly marked dip switches.
Support for Microcontrollers in DIP18, DIP28 and DIP40 socket
2 potentiometers are available for testing AD conversion and comparators.
Power Supply select - USB or external. Also there is a switch for turning on/off system.
4.096 V voltage reference for internal AD Converter.
All pins are connected to ICD connectors for further connecting.
40 diodes for displaying states of all pins on the microcontroller at the same time.
Pull up or Pull down port defining.
41 buttons for program developing needs.
ICD2 connector for In circuit debugger.
Very fast USB 2.0 programmer on board.
GLCD display plugs in via a connector on-board.
Graphic contrast potentiometer.
LCD display plugs in via a connector on PC board.
External power supply can be DC or AC.
Crystal can be removed and replace with another one.
USB connector for programmer on-board.
All pins are marked on the back of the board.
Choose voltage level to be applied when a button is pressed (GND or +5V).
Reset circuit.
GLCD - Graphic display 128x64.
Soft rubber foot give good connection with the working table.
The MCP1541 device is 4.096V precision voltage references that use a combination of an advanced CMOS circuit design.
The standard LCD is probably the most widely used data visualization component. Normally, it can display two lines of 16 alphanumeric characters, each made up of 5x7 pixels.
The Graphic LCD (GLCD) allows advanced visual messages to be displayed. The most commonly used graphic LCD has a screen resolution of 128x64 pixels.
EasydsPIC4 development system is a full-featured development board for the Microchip dsPIC microcontrollers. It was designed to allow students or engineers to easily exercise and explore the capabilities of the dsPIC microcontrollers. It allows the dsPIC microcontroller to be interfaced with external circuits to a broad range of the peripheral devices, allowing the user to concentrate just on the software.
Figure on the right illustrates the first contact with the development system. On a silkscreen there are marks beside every component. These marks describe connection to microcontroller, operation modes, and some other useful notes. As a result, need for additional schematics is minimized, because all information are already on the board.
3 in 1 Development Tool - Development Board + USB 2.0 on-board programmer - dsPICprog2 + mikro ICD on-board: mikro ICD is a highly effective tool for Real-Time debugging on a hardware level. The ICD debugger enables you to execute a mikroC/mikroPascal/mikroBasic program on a host dsPIC microcontroller and view variable values, Special Function Registers (SFR), memory and EEPROM as the program is running. Also there is dsPICprog2 USB 2.0 – an ultra fast USB 2.0 programmer for fast MCU programming. Continuing its tradition as the fastest dsPIC programmer on the market, the new dsPICprog2 with mikroICD now supports more dsPIC MCUs giving the developer a wider choice of dsPIC MCU for further prototype development.
dsPICprog2 software for Windows [966KB]
Drivers for dsPICprog2 software [1.2MB]
mikroPascal for dsPIC examples [838KB]
mikroBasic for dsPIC examples [843KB]
mikroC for dsPIC examples [1.7MB]
A beginner? Worry not. Easy-to-learn BASIC syntax, advanced compiler features, built-in routines, and many practical examples we have provided allow a quick start in programming dsPIC. [more]
Comprehensive, stand-alone Pascal compiler for dsPIC MCUs. Develop your applications in intuitive and friendly Pascal environment, using many advanced features and practical examples. [more]
All the power and flexibility provided by ANSI C, with the most advanced IDE on the market. A perfect match. Plenty practical examples and a comprehensive documentation. [more]
AD conversion and displaying on LCD.
AD conversion and displaying on LED
diodes in binary form.
AD conversion and send conversion result via USART.
Timer 0 and time measuring.
Examples for SPI communication.
Examples for CAN communication.
Examples for Sound generation.
Sending and receiving data over Ethernet.
Examples for SPI Port Expander.
Examples for Toshiba T6963 Graphic LCD.
Interrupt upon port B state change.
Detection of button pressed on portB.
Printing text on LCD.
Diodes blinking on port B.
Display text and images on Graphic LCD.
Examples for I2C communication.
Examples for RS485 communication.
Examples for sending and receiving data using Manchester Code.
Examples for Sinusoid generation.
Examples for SPI Graphic LCD.
Measuring temperature with DS1820
and sending data to the PC via serial
communication.
Sending data to the PC via serial
communication.
Creating delay with timer 0.
Creating delay with timer 1.
Creating delay with timer 2.
Sending data from PS/2 keyboard.
Read date and time from PCF8583 RTC Real Time Clock.
Examples for reading and writing data to MMC or CF cards.
Drawings for all dev.system parts are simple and clear.
EasydsPIC4 development system.
USB cable.
Serial cable.
Printed Board Schematic.
CD with software, drivers, manuals and examples in BASIC, Pascal and C.
The Box is very resistant to shock and transport damage.
EasydsPIC4 comes with printed board schematic.
All credit card and personal details are kept secure, and our customer list is not disclosed to any third party. Most shipments are sent within 48 hours of your order.
$129.00 USD
EasydsPIC4 Development System
$15.00 USD
2x16 LCD and DS1820 temperature sensor
$17.00 USD
Graphic LCD 128x64 dots
If you have any problems with CC processing please inform us: office@mikroe.com
If you want to pay directly to our bank account please contact us: office@mikroe.com