System supports 8, 14, 20, 28 and 40 pin AVR® microcontrollers (it comes with ATMEGA16). Each jumper, element and pin is clearly marked on the board.
High-Performance USB 2.0 On-Board ProgrammerState-Of-The-Art very fast USB 2.0 programmer on-board with simplified driver installation
User-Friendly AVR® development systemEasyAVR6 development system is a full-featured development board for the AVR® microcontrollers.
The smart choice for AVR® microcontrollersEasyAVR6 allows the AVR® MCU to be interfaced with external circuits to a broad range of the peripheral devices.
Get comfortable with EasyAVR6 development toolIt was designed to allow students or engineers to easily exercise and explore the capabilities of the AVR® microcontrollers.
On-board 4x4 Keypad allows efficient entry of numerical data as well as other characters.
Menu Keypad enables easy and fast menu browsing for your prototype device.
There is Port Expander on-board if there is need for more inputs or outputs.
RS-232 communication with PC or another microcontroller.
System can be easily configured via clearly marked DIP switches.
Digital thermometer DS1820 for measuring temperature from -55ºC to 125ºC.
Support for Microcontrollers in DIP8, DIP14, DIP20, DIP28 and DIP40 pin socket.
There is Potentiometer is available for testing multiple AD conversion and comparators.
Power Supply select - USB or external. Also there is a switch for turning on/off system.
2x16 Character COG Display is available on-board for displaying text messages.
All pins are connected to IDC connectors for further expansion.
35 diodes for displaying states of all pins on the microcontroller at the same time.
Pull up or Pull down port defining.
35 buttons for program developing needs.
DIP switch for separating port pins from Pull up or Pull down
Very fast USB 2.0 programmer on board.
LCD display plugs in via a connector on PC board.
Character LCD contrast potentiometer.
Touch screen controller with connector is available on-board.
External power supply can be DC or AC.
Crystal can be removed and replaced by another one.
GLCD - Graphic display 128x64.
All pins are marked on the back of the board.
Choose voltage level to be applied when a button is pressed (GND or +5V).
Graphic LCD contrast potentiometer.
Reset circuit.
PS/2 connector is used for connecting EasyPIC6 and PS/2 device.
There are connectors on-board for programming with External programmer.
There is an JTAG port that supports in-circuit debugging and firmware programming.
COG 2x16 Display contrast potentiometer.
Port Expander features MCP23S17, the 16-bit I/O expander that features SPI(tm) clock speeds up to 10 MHz. Also, there are LEDs incdicating states of port expander pins.
COG Display (Chip-on-Glass LCD) is an excellent solution where a low profile is required such as mobile and hand held devices. It is connected to the MCU via port expander so that more pins are available for other use.
There are 2 set of buttons arranged in a block which are called Keypad 4x4 and Menu Keypad. Those keypads are marked with digits and other symbols but not a complete set of alphabetical letters.
Touchscreens are popular in heavy industry and in other situations, such as museum displays or room automation, where keyboards and mouse do not allow a satisfactory, intuitive, rapid, or accurate interaction by the user with the display's content. Such displays can be attached to computers or, as terminals, to networks. Touchscreens also have made these devices more usable.
Touch Screen Specification [43KB]
The Graphic LCD (GLCD) allows advanced visual messages to be displayed. The most commonly used graphic LCD has a screen resolution of 128x64 pixels.
Touch screen is display overlay which have the ability to display and receive information on the same display. The effect of such overlay allows a display to be used as an input device.
The standard LCD is probably the most widely used data visualization component. Normally, it can display two lines of 16 alphanumeric characters, each made up of 5x7 pixels.
USB 2.0 on-board programmer - AVRprog2: You will get the USB programmer which doesn't use boot loader or any similar way of programming. The whole AVR memory and all pins are available to you. Aside from that, you will have state-of-the-art fast USB AVR InSystem programmer for your future projects.
Our latest AVRprog2 Programmer is driven and powered from a single USB port on your computer. No additional AC power adapter is needed. The programmer is recognized by Windows, which simplifies driver installation. The programmer board is specifically designed for In-Circuit Serial Programming (ICSP). Also External Programmer and JTAG can be connected and used with this development system.
AVRprog2 software for Windows [1.9MB]
Drivers for AVRprog2 software [1.6MB]
EasyAVR6 Examples [201KB]
A beginner? Worry not. Easy-to-learn BASIC syntax, advanced compiler features, built-in routines, and the many practical examples that we have provided allow a quick start in programming AVR. [more]
Comprehensive, stand-alone Pascal compiler for AVR MCUs. Develop your applications in an intuitive and friendly Pascal environment, using many advanced features and practical examples. [more]
All the power and flexibility provided by ANSI C, with the most advanced IDE on the market. A perfect match. Plenty of practical examples and a comprehensive documentation. [more]
7seg displays in multiplex mode.
AD conversion and displaying on LCD.
AD conversion and displaying on LED
diodes in binary form.
AD conversion and send conversion result via USART.
Timer 0 and time measuring.
Measuring temperature with DS1820
and displaying on LCD.
Examples for SPI communication.
Examples for CAN communication.
Examples for Sound generation.
Sending and receiving data over Ethernet.
Sending and receiving data over SPI Ethernet.
Printing text on COG Display.
Measuring temperature with DS1820 and displaying on 7seg displays in multiplex mode.
Interrupt upon port B state change.
Detection of button pressed on portB.
Printing text on LCD.
Diodes blinking on port B.
Display text and images on Graphic LCD.
Examples for I2C communication.
Examples for RS485 communication.
Examples for sending and receiving data using Manchester Code.
Examples for Sinusoid generation.
Examples for SPI Graphic LCD.
Examples for SPI Port Expander.
Touch Screen demonstration example.
Measuring temperature with DS1820
and sending data to the PC via serial
communication.
Sending data to the PC via serial
communication.
Creating delay with timer 0.
Creating delay with timer 1.
Creating delay with timer 2.
Sending data from PS/2 keyboard.
One-wire communication with temperature sensor.
Read date and time from PCF8583 RTC Real Time Clock.
Examples for reading and writing data to MMC or CF cards.
Examples for Toshiba T6963 Graphic LCD.
Demonstration of Menu Keypad and Keypad 4x4.
Drawings for all dev.system parts are simple and clear.
EasyAVR6 development system.
USB cable.
Printed Documentation.
CD with software, drivers and examples in C, BASIC and Pascal.
The Box is very resistant to shock and transport damage.
NOTE: Touch Screen, Pencil, DS1820, LCD, Serial Cable and GLCD are not included in the price !!!
EasyAVR6 comes with printed documentation: EasyAVR6 Manual, EasyAVR6 Schematic Diagram, AVRFlash Manual and Quick Guide for Installing USB Drivers.
The PCF8583 is a clock (calendar) with I2C bus interface.[more]
The MCP3204 is 4-Channel 12 Bit A/D Converter.[more]
DAC Board - The MCP4921 is DAC with SPI interface.[more]
CAN Board - The MCP2551 is CAN Transceiver. [more]
CAN2 Board - The MCP2515 on-board. [more]
CF Board - Easy way to use CF Cards. [more]
RS485 Board - LTC485 is a low power transceiver. [more]
Accel Board - The ADXL330 is on-board. [more]
EEPROM is typically used to store prototype parameters. [more]
MMC card is used as storage media for portable device. [more]
ENC 28J60 is 10BASE-T stand alone Ethernet Controller. [more]
EasyConnect Connects your peripherals easy and fast. [more]
EasyInput - DIP switch is used to customize the behavior.[more]
Convert your DIP40 socket to AT90PWM compatible socket.[more]
Digital Pot Board MCP41010 SPI Interfaced digital pot.[more]
MAX7219 SPI Interfaced, LED Display Drivers.[more]
SmartMP3 Board Add MP3 to your prototype with VS1011e. [more]
Light To Freq Board Add light to frequency converter. [more]
Motion Sensor AMN11112 sensor detects movement changes. [more]
mikroDrive Interface your prototype with power loads. [more]
All credit card and personal details are kept secure, and our customer list is not disclosed to any third party. Most shipments are sent within 48 hours of your order. 2Checkout.com is an authorized reseller of goods and services provided by mikroElektronika.
$24.00 USD
Graphic LCD 128x64 with TouchPanel
$15.00 USD
2x16 LCD and DS1820 temperature sensor
$17.00 USD
Graphic LCD 128x64 dots
$7.00 USD
TouchPanel
$6.50 USD
AT90PWM1 and AT90PWM2 to DIP40B Adapter Board
$6.50 USD
AT90PWM3 to DIP40B Adapter Board
$1.50 USD
Serial Cable
If you have any problems with CC processing please inform us: office@mikroe.com
If you want to pay directly to our bank account please contact us: office@mikroe.com