Atmel 8051 Development Board
System supports 14, 16, 20, 28 and 40 pin MCU (it comes with AT89S8253). Also there are PLCC44 and PLCC32 sockets for 32 and 44 pin MCU's.
High-Performance USB 2.0 On-Board ProgrammerState-Of-The-Art very fast USB 2.0 programmer on-board with simplified driver installation
User-Friendly Atmel 8051 development systemEasy8051B development system is a full-featured development board for the Atmel 8051 microcontrollers.
The smart choice for 8051 microcontrollersEasy8051B allows the 8051 MCU to be interfaced with external circuits to a broad range of the peripheral devices, allowing the user to concentrate just on the software.
Get comfortable with Easy8051B development toolIt was designed to allow students or engineers to easily exercise and explore the capabilities of the 8051 microcontrollers.
RS-232 communication with PC or another microcontroller.
System can be easily configured via clearly marked DIP switches.
Digital thermometer DS1820 for measuring temperature from -55ºC to 125ºC.
Support for MCU's in DIP14, DIP16, DIP20, DIP28 and DIP40 pin socket.
Potentiometer are available for testing AD conversion and comparators.
Power Supply select - USB or external. Also there is a switch for turning on/off system.
4 seven-segment digits in multiplex mode.
All pins are connected to IDC connectors for further expansion.
38 diodes for displaying states of all pins on the microcontroller at the same time.
Pull up or Pull down port defining.
38 buttons for program developing needs.
Very fast USB 2.0 programmer on board.
USB communication connector for connecting programmer with PC.
LCD display plugs in via a connector on PC board.
GLCD Contrast Potentiometer - Adjust Graphic LCD contrast via potentiometer on-board.
GLCD connector - For connecting Graphic LCD on-board.
External power supply can be DC or AC.
Crystal can be removed and replaced by another one.
GLCD - Graphic display 128x64.
All pins are marked on the back of the board.
Choose voltage level to be applied when a button is pressed (GND or +5V).
DAC - Digital - Analog Converter available for testing DA conversion.
Reset circuit.
Vref+ - For ADC and DAC 4.096V is available
Support for MCU's in PLCC32 socket.
Support for MCU's in PLCC44 socket.
MCU Power Switch - For controlling MCU power supply by on-board programmer.
The Graphic LCD (GLCD) allows advanced visual messages to be displayed. The most commonly used graphic LCD has a screen resolution of 128x64 pixels.
A seven-segment display, less commonly known as a seven-segment indicator, is a form of display device that is an alternative to the more complex dot-matrix displays.
The standard LCD is probably the most widely used data visualization component. Normally, it can display two lines of 16 alphanumeric characters, each made up of 5x7 pixels.
Easy8051B development system is a full-featured development board for the Atmel 8051 microcontrollers. It was designed to allow students or engineers to easily exercise and explore the capabilities of the 8051 microcontrollers. It allows the 8051 microcontroller to be interfaced with external circuits to a broad range of the peripheral devices, allowing the user to concentrate just on the software. Figure on the left illustrates the first contact with the development system. On a silkscreen there are marks beside every component. These marks describe connection to microcontroller, operation modes, and some other useful notes. As a result, need for additional schematics is minimized, because all information are already on the board.
Our latest Flash 8051 Programmer is driven and powered from a single USB port on your computer. No additional AC power adapter is needed. The programmer is recognized by Windows, which simplifies driver installation. The programmer board is specifically designed for In-Circuit Serial Programming (ICSP).
USB 2.0 on-board programmer - Flash 8051: You will get the USB programmer which doesn't use boot loader or any similar way of programming. The whole 8051 memory and all pins are available to you. Aside from that, you will have state-of-the-art fast USB 8051 InSystem programmer for your future projects.
Note: This programmer supports only 8051 microcontrollers with SPI Serial Interface for Program Downloading.
8051flash software for Windows [965KB]
Drivers for 8051flash software [1.2MB]
Examples for Easy8051B [614KB]
A beginner? Worry not. Easy-to-learn BASIC syntax, advanced compiler features, built-in routines, and the many practical examples that we have provided allow a quick start in programming 8051. [more]
Comprehensive, stand-alone Pascal compiler for 8051 MCUs. Develop your applications in an intuitive and friendly Pascal environment, using many advanced features and practical examples. [more]
All the power and flexibility provided by ANSI C, with the most advanced IDE on the market. A perfect match. Plenty of practical examples and a comprehensive documentation. [more]
Demonstration of using Button Library.
Demonstration of the LCD library routines
Examples for CAN communication.
Examples for RS485 communication.
Sending and receiving data over SPI Ethernet.
Examples for Toshiba T6963 Graphic LCD.
Demonstration of using EEPROM Library.
Simple 'Hello World' project (LED Blinking).
Using TMR1 to obtain interrupts.
Driving external ADC (Analog-to-Digital converter).
Examples for sending and receiving data using Manchester Code.
Demonstration of the GLCD library routines
Interfacing the DS1820 temperature sensor
Simple usage of UART module library functions
Simple usage of 7-segment displays
Sending data from PS/2 keyboard.
Examples for Sound generation.
Examples for SPI communication.
Drawings for all dev.system parts are simple and clear.
Easy8051B development system.
USB cable.
Serial cable.
Board schematic.
CD with software, drivers and examples written in C, Pascal and Basic.
The Box is very resistant to shock and transport damage.
NOTE: GLCD, 2x16 LCD and DS1820 are not included in the price !!!
Easy8051B comes with printed board schematic.
CAN 2 Board with SPI interface for all MCU which have SPI communication. [more]
The IrDA defines physical specs. protocol standards for the short range exchange of data over infrared light. [more]
MMC card is used as storage media for a portable device, in a form that can easily be removed for access by a PC. [more]
CompactFlash (CF) is a data storage device, used in portable electronic devices. [more]
The RS485 standard allows the user to configure inexpensive local networks using twisted pair wire. [more]
Connect Accel. board to the development system, load an example and it's all set to start the measuring. [more]
Irda2 serve as wireless RS232 communication between two Microcontrollers. [more]
Keypad can also be integrated as part of prototype that contains a calculator-style arrangement of buttons. [more]
Ethernet is a large and diverse family of frame-based computer networking technologies for local area networks (LANs).[more]
Port Expander Board - Easy way to use expand ports in your design and prototype development. [more]
EasyConnect - Connect your peripherals easy and fast using high quality connectors. [more]
EasyInput - Make input levels easy and fast using high quality DIP switch.[more]
All credit card and personal details are kept secure, and our customer list is not disclosed to any third party. Most shipments are sent within 48 hours of your order.
$129.00 USD
Easy8051B Development System
$15.00 USD
2x16 LCD and DS1820 temperature sensor
$17.00 USD
Graphic LCD 128x64 dots
$8.60 USD
Additional AT89S8253 (40-pin) Microcontroller
$2.80 USD
Additional AT89S4051 (20 pin) Microcontroller
If you have any problems with CC processing please inform us: office@mikroe.com
If you want to pay directly to our bank account please contact us: office@mikroe.com