OUT OF STOCK !!! New version here.
System supports 64 and 80 dsPIC30F microcontrollers (it comes with dsPIC30F6014A - dsPIC30F General Purpose 16-bit Digital Signal Controller, 144 KB Flash Memory, 8 KB RAM, and Advanced Peripherals, 80 Pin Package). You can choose between USB or External Power supply. dsPIC PRO 3 also supports Character LCD as well as Graphic LCD.
dsPIC PRO 3 is easy to use Microchip dsPIC30F tool. dsPIC PRO 3 has many features that makes development easy.
NOTE: Graphic LCD, Serial Cable and MMC/SD Card are not included in the price !!!
Digital thermometer DS1820 for temperature measurement from -55°C to 125°C.
Switch between power supply thru USB or external power supply.
ICD2 connector for customers who want to use it.
On board USB 2.0 programmer.
2x RS-232 communication for connection with a PC or any other device with a DB9 connector.
Microchip's ENC28J60 is a 28-pin, 10BASE-T stand alone Ethernet Controller.ENC28J60 has small foot print package.
67 LEDs are provided.
It is on programmer to chose VCC (5V) or 4.096 V as a reference for AD or DA Converter.
2X CAN communication for both channels in the dsPIC microcontroller.
Real Time Clock PFC8583 with battery supply.
RS485 communication for connecting more devices into 485 network.
All pins are taken out on IDC10 connectors to make them available for further connections.
LCD backlight potentiometer for graphic and standard LCD.
67 buttons are provided.
Choose logical level which you will bring to the pin by pressing the button.
Power Supply select - USB or external.
Each element on the board can be disconnected via jumpers.
Serial 12-bit voltage DA converter for applications in measure - regulating devices.
PS2 connector makes direct connection between dsPICPRO 3 and PC keyboard.
Power and USB link signalization.
MCU card are well supplied with capacitor which allow stable work.
MMC\SD card slot - For MMC\SD memory cards. Used for data acquisition.
Reset circuit.
Potentionmeters for simulating analog voltage input.
The Graphic LCD (GLCD) allows advanced visual messages to be displayed. The most commonly used graphic LCD has a screen resolution of 128x64 pixels. There is connector for backlight.
The standard LCD is probably the most widely used data visualization component. Normally, it can display two lines of 16 alphanumeric characters, each made up of 5x7 pixels.
Microchip's ENC28J60 is a 28-pin, 10BASE-T stand alone Ethernet Controller with on board MAC & PHY, 8 Kbytes of Buffer RAM and an SPI. With a small package size the ENC28J60 minimizes complexity, board space and cost.
MCU card have a very good contact with the board thru a two-line connector. The bottom of the card is ground plane for noise prevention.
Pin marks exist on the motherboard and on the card. By placing pin mark programmer have access to all pins which he want to check. On each corner of the card there is one electrolytic capacitor for stable power supply.
All peripherals can be connected or disconnected via dip switch. Some peripherals have their own jumpers as seen in the picture on the left.
The dsPICPRO3 development system is a full-featured development board for Microchip dsPIC MCU. It allows dsPIC MCU to be interfaced with external circuits and a broad range of peripheral devices.
3 in 1 Development Tool - Development Board + USB 2.0 on-board programmer - dsPICprog2 + mikro ICD on-board: mikro ICD is a highly effective tool for Real-Time debugging on a hardware level. The ICD debugger enables you to execute a mikroC/mikroPascal/mikroBasic program on a host dsPIC microcontroller and view variable values, Special Function Registers (SFR), memory and EEPROM as the program is running. Also there is dsPICprog2 USB 2.0 – an ultra fast USB 2.0 programmer for fast MCU programming. Continuing its tradition as the fastest dsPIC programmer on the market, the new dsPICprog2 with mikroICD now supports more dsPIC MCUs giving the developer a wider choice of dsPIC MCU for further prototype development.
dsPICprog2 software for Windows [1.8MB]
Drivers for dsPICprog2 software [1.6MB]
mikroPascal for dsPIC examples [915KB]
mikroBasic for dsPIC examples [900KB]
mikroC for dsPIC examples [1.8MB]
A beginner? Worry not. Easy-to-learn BASIC syntax, advanced compiler features, built-in routines, and many practical examples we have provided allow a quick start in programming dsPIC and PIC24. [more]
Comprehensive, stand-alone Pascal compiler for dsPIC and PIC24 MCUs. Develop your applications in intuitive and friendly Pascal environment, using many advanced features and practical examples. [more]
All the power and flexibility provided by ANSI C compiler for dsPIC and PIC24 MCUs, with the most advanced IDE on the market. A perfect match. Plenty practical examples and a documentation. [more]
7seg displays in multiplex mode.
AD conversion and displaying on LCD.
AD conversion and displaying on LED
diodes in binary form.
AD conversion and send conversion result via USART.
Timer 0 and time measuring.
Measuring temperature with DS1820
and displaying on LCD.
Examples for SPI communication.
Examples for CAN communication.
Examples for Sound generation.
Sending and receiving data over Ethernet.
FIR_Radix Example.
Port Expander Example.
T6963C Graphic LCD Example.
Measuring temperature with DS1820 and displaying on 7seg displays in multiplex mode.
Interrupt upon port B state change.
Detection of button pressed on portB.
Printing text on LCD.
Diodes blinking on port B.
Display text and images on Graphic LCD.
Examples for I2C communication.
Examples for RS485 communication.
Examples for sending and receiving data using Manchester Code.
Examples for Sinusoid generation.
IIR_Radix Example.
Serial Graphic LCD Example.
Sound Example.
Measuring temperature with DS1820
and sending data to the PC via serial
communication.
Sending data to the PC via serial
communication.
Creating delay with timer 0.
Creating delay with timer 1.
Creating delay with timer 2.
Sending data from PS/2 keyboard.
One-wire communication with temperature sensor.
Read date and time from PCF8583 RTC Real Time Clock.
Examples for reading and writing data to MMC or CF cards.
FFT Example.
Serial Ethernet Example.
Drawings for all dev.system parts are simple and clear.
dsPIC PRO 3 development system.
USB cable.
2x16 Character LCD.
DS1820 Temprature Sensor.
Printed Board Schematic.
CD with software, drivers and examples in BASIC, Pascal and C.
The Box is very resistant to shock and transport damage.
NOTE: Graphic LCD, Serial Cable and MMC/SD Card are not included in the price !!!
dsPIC PRO 3 comes with printed board schematic.
All credit card and personal details are kept secure, and our customer list is not disclosed to any third party. Most shipments are sent within 48 hours of your order.
OUT OF STOCK !!! New version available here
$24.90 USD
Additional MCU card with dsPIC30F6014A MCU
$1.50 USD
Serial Cable
If you have any problems with CC processing please inform us: office@mikroe.com
If you want to pay directly to our bank account please contact us: office@mikroe.com