OUT OF STOCK !!! New version here.
Following tradition of its predecessor BIGPIC3 as best 80-pin PIC development system on market, BIGPIC4 continues tradition with more new features for same price. System supports the latest 80-pin PIC microcontrollers (it is delivered with PIC18F8520 working at 10MHz). Many ready made examples guarantee successful use of the system. BIGPIC4 is easy to use Microchip PIC development system.
BIGPIC4 has many features that makes your development easy. Ultra fast mikroICD (In-circuit
Debugger) enables very efficent debugging and faster prototype developing.
NOTE: GLCD and MMC/SD Cards are not included in the price !!!
46 buttons for purposes of program development.
All pin from the bottom of the board are also clearly marked.
Digital thermometer DS1820 for measuring temperature from -55ºC to 125ºC.
USB connector for In- System programming with PIC FLASH programmer.
46 diodes for displaying microcontroller pin states simultaneously.
System can be easily configured via clearly marked dip switches.
All pins are connected to ICD connectors for further connecting.
Dip switch on port A for separating the analog lines.
All ports can can be set to PULL UP or PULL down resistors via jumpers.
Power supply is flexible 9-15 V (AC or DC). Also you can chose external or USB power supply.
Double RS-232 communication with PC or another microcontroller.
Buttons can be connected to VCC or GND via jumpers..
Two potentiometers for simulation of analog inputs.
Microcontroller board can be replaced. Hi quality contact provide good connection with peripherals.
Potentiometer for LCD and GLCD contrast.
GLCD - Graphic display 128x64
PS2 connector makes possible direct connection between BIGPIC4 and PC keyboard.
LCD 2x16 in 8-bit mode.
MMC\SD card slot - For MMC\SD memory cards.
Standard 2x16 LCD - 2x16 Character LCD Display in 4-bit mode.
Reset circuit
LCD2x16 character LCD can be easily placed or removed off the board. All LCD connector pins are clearly marked from both side of the board. LCD is included in the price !!!
BIGPIC4 development system is a full-featured development board for the Microchip 80-pin PIC microcontrollers. As successor of BIGPIC3 board, BIGPIC4 has all benefits and it is fully optimized for fast prototype development. It allows the PIC microcontroller to be interfaced with external circuits to a broad range of the peripheral devices, allowing the user to concentrate just on the software. Figure on the left illustrates the first contact with the development system. On a silkscreen there are marks beside every component. These marks describe connection to microcontroller, operation modes, and some other useful notes. As a result, need for additional schematics is minimized, because all information are already on the board.
3 in 1 Development Tool - Development Board + USB 2.0 on-board programmer - PICFlash2 + mikro ICD on-board: mikro ICD is highly effective tool for Real-Time debugging on hardware level. ICD debugger enables you to execute a mikroC/mikroPascal/mikroBasic program on a host PIC microcontroller and view variable values, Special Function Registers (SFR), memory and EEPROM as the program is running. Also there is PICFlash USB 2.0 - Ultra Fast USB 2.0 programmer for fast MCU programming. Continuing tradition as fastest PIC programmer on market, new PICFlash with mikroICD now supports more PIC MCU's giving developer wide choice of PIC MCU for further prototype development.
PICFlash2 software for Windows [1.6MB]
Drivers for PICFlash2 software [1.2MB]
Examples for mikroBasic [250KB]
Examples for mikroPascal [251KB]
Examples for mikroC [214KB]
A beginner? Worry not. Easy-to-learn BASIC syntax, advanced compiler features, built-in routines, and many practical examples we have provided allow a quick start in programming PIC. [more]
Comprehensive, stand-alone Pascal compiler for PIC MCUs. Develop your applications in intuitive and friendly Pascal environment, using many advanced features and practical examples. [more]
All the power and flexibility provided by ANSI C, with the most advanced IDE on the market. A perfect match. Plenty practical examples and a comprehensive documentation. [more]
7seg displays in multiplex mode.
AD conversion and displaying on LCD.
AD conversion and displaying on LED
diodes in binary form.
AD conversion and send conversion result via USART.
Timer 0 and time measuring.
Measuring temperature with DS1820
and displaying on LCD.
Examples for SPI communication.
Examples for CAN communication.
Examples for Sound generation.
Sending and receiving data over Ethernet.
Sending and receiving data over SPI Ethernet.
Measuring temperature with DS1820 and displaying on 7seg displays in multiplex mode.
Interrupt upon port B state change.
Detection of button pressed on portB.
Printing text on LCD.
Diodes blinking on port B.
Display text and images on Graphic LCD.
Examples for I2C communication.
Examples for RS485 communication.
Examples for sending and receiving data using Manchester Code.
Examples for Sinusoid generation.
Examples for SPI Graphic LCD.
Examples for SPI Port Expander.
Measuring temperature with DS1820
and sending data to the PC via serial
communication.
Sending data to the PC via serial
communication.
Creating delay with timer 0.
Creating delay with timer 1.
Creating delay with timer 2.
Sending data from PS/2 keyboard.
One-wire communication with temperature sensor.
Read date and time from PCF8583 RTC Real Time Clock.
Examples for reading and writing data to MMC or CF cards.
Examples for Toshiba T6963 Graphic LCD.
Drawings for all dev.system parts are simple and clear.
BIGPIC4 development system.
USB cable.
Serial cable.
Board schematic.
CD with software, drivers and examples in C, BASIC and Pascal.
The Box is very resistant to shock and transport damage. NOTE: GLCD is not included in the price !!!
BIGPIC4 comes with printed board schematic.
Real-Time clock (RTC) is a electronic clock that keeps track of the current time even when the MCU is turned off. [more]
AD converters are used virtually everywhere where an analog signal has to be processed, stored, or transported in digital form.[more]
DAC is the interface between the abstract digital world and the analog real life. [more]
CAN was specifically designed to be robust in electromagnetically noisy environments and can utilize a differential balanced line. [more]
CAN 2 Board with SPI interface for all MCU which have SPI communication. [more]
The IrDA defines physical specs. protocol standards for the short range exchange of data over infrared light. [more]
The RS485 standard allows the user to configure inexpensive local networks using twisted pair wire. [more]
Connect Accel. board to the development system, load an example and it's all set to start the measuring. [more]
Irda2 serve as wireless RS232 communication between two Microcontrollers. [more]
Keypad can also be integrated as part of prototype that contains a calculator-style arrangement of buttons. [more]
EEPROM is typically used to store prototype configuration parameters. [more]
Easy way to use Compact flash in your design and data acquisition. Record and analyze the information received by the microcontroller on compact flash cards. [more]
Ethernet is a large and diverse family of frame-based computer networking technologies for local area networks (LANs).[more]
All credit card and personal details are kept secure, and our customer list is not disclosed to any third party. Most shipments are sent within 48 hours of your order.
OUT OF STOCK !!! New version available here
$17.00 USD
Graphic LCD 128x64 dots
$19.00 USD
Additional MCU card with PIC18F8520 Microcontroller
$21.00 USD
Additional MCU card with PIC18F8722 Microcontroller
If you have any problems with CC processing please inform us: office@mikroe.com
If you want to pay directly to our bank account please contact us: office@mikroe.com