Development Tools | mikroElektronika

Manufactured by Microchip, the PIC ("Peripheral Interface Controller") is a powerful, robust microcontroller popular among engineers and hobbyists alike. PIC microcontrollers come in a variety of "flavors", each with different components and capabilities. Many types of electronic projects can be constructed easily with the PIC family of microprocessors, among them clocks, very simple video games, robots, servo controllers, and many more. The PIC is a very general purpose microcontroller that can come with many different options, for very reasonable prices.

EasyPIC5

EasyPIC5 development system is a full-featured development Board for the Microchip PIC MCU's. There is USB 2.0 on-board programmer and mikro ICD (In-Circuit Debugger) on-board. Price: $129 USD [more]

BIGPIC5

System supports the latest 64 and 80-pin PIC microcontrollers (it is delivered with PIC18F8520). There is USB 2.0 on-board programmer, on-board mikroICD and on-board TouchPanel controller. Price: $169 USD [more]

PICPLC16B

PICPLC16B is advanced system for installing into devices and for developing industrial and home or office control. Features: 16 relays, 16 optocoupled inputs, RS485, RS232, Serial Ethernet, USB 2.0 on-board programmer and mikroICD (In-Circuit Debugger) on-board.Price: $159 USD [more]

PICPLC8A

PICPLC8A is a system for installing into devices as well as for developing industrial control. Features: 8 relays, 8 optocoupled inputs, RS485, RS232, PS/2 and USB 2.0 on-board programmer and mikro ICD (In-Circuit Debugger) on-board.Price: $124 USD [more]

EasyPIC5 PROTO Board

Connect your EasyPIC5 development board to prototype board via IDC10 connector. High quality PCB prototype board. EasyPIC5 PROTO Board solves your prototying problems by offering complete, cost effective solution. Price: $9 USD [more]

PICFlash with mikroICD support

PICFlash with mikroICD support is a programmer and in-circuit debugger for the Microchip's PIC FLASH microcontroller family. Beside standard FLASH microcontrollers it can also program the latest PIC MCU's. Price: $89 USD [more]

PIC MCU CARDS

PIC MCU card's (80 pin) have a very good contact with the Board thru a two-line connector. The bottom of the card is ground plane for noise prevention. Price: $19/$22 USD [more]

Empty BIGPIC MCU cards

Empty PIC MCU card's (80 pin and 64 pin) have a very good contact with the board thru a two-line connector. The bottom of the card is ground plane. Customers can solder their own MCU and other electronic components on this PCB. Price: $4.90 USD [more]

LV 18FJ

System supports 64, 80 and 100 pin PIC18FxxJxx microcontrollers (it comes with PIC18F87J60 - PIC18 Microcontroller with an integrated 10Mbps Ethernet communications peripheral, 80 Pin Package).Price: $132 USD [more]

Empty LV 18FJ MCU cards

Empty LV 18FJ MCU card's have a very good contact with the board thru a two-line connector. The bottom of the card is ground plane for noise prevention. Customers can solder their own MCU and other electronic components on this PCB. Price: $4.90 USD [more]

18FJprog with mikroICD support

18FJprog with mikroICD support is a USB 2.0 programmer and in-circuit debugger for the Microchip's PIC 18FxxJxx microcontroller family. Price: $75 USD [more]

PICPLC4 Board

PICPLC4 is a system designed for controlling industrial systems and machines via ethernet with 4 relays (up to 10A). 18FJprog programmer can be easily connected to PICPLC4 board via IDC10 connector. Price: $79 USD [more]

PICPLC16 BOX

Box protected system for installing into devices and for developing industrial and home or office control. Features: 16 relays, 16 optocoupled inputs, RS485, CAN, MMC, Keypad, RTC, RS232, PS/2, USB 2.0 on Board in system programmer. Price: $219 USD [more]

LV18FJ Experimental Board

High Quality mikroElektronika LV18FJ Experimental board will give you easiness of programming microcontroller unit. This experimental board supports LV18FJ MCU Cards.Price: $24 USD [more]

UNI-DS 3 [PIC]

Universal Development system for PIC, dsPIC, PSOC, AVR, 8051 and ARM MCU. It is enough to switch the card and continue work in the same development surroundings, but with different microcontroller.Price: $149 USD [more]

dsPIC30Fs are Microchip's newer family, which entered mass production in late 2004. They are designed as a PIC with digital signal processing capabilities. These are Microchip's first inherent 16-bit (data) microcontrollers. They build on the PICs existing strengths by offering hardware MAC (multiply-accumulate), barrel shifting, bit reversal, (16x16)-bit multiplication and other digital signal processing operations.

dsPICPRO4

System supports 64 and 80 dsPIC30F microcontrollers (it comes with dsPIC30F6014A - dsPIC30F General Purpose 16-bit Digital Signal Controller, 144 KB Flash Memory, 8 KB RAM, 80 Pin Package).Price: $239 USD [more]

EasydsPIC4

System supports 18, 28, and 40-pin dsPIC microcontrollers (it is delivered with dsPIC30F4013). Examples in BASIC, PASCAL and C. There is USB 2.0 on-board programmer and mikroICD.Price: $129 USD [more]

EasydsPIC3

System supports 18, 28, and 40-pin dsPIC microcontrollers (it is delivered with dsPIC30F4013). Examples in BASIC, PASCAL and C are included with the system. Price: $119 USD [more]

BIGdsPIC

System supports the latest 80-pin dsPIC microcontrollers (it is delivered with PIC30F6014 working at 10MHz) Many ready made examples guarantee successful use of the system.Price: $132 USD [more]

dsPICprog with mikroICD support

dsPICprog with mikroICD is a USB 2.0 programmer and in-circuit debugger for the Microchip's dsPIC microcontroller family. Price: $75 USD [more]

dsPIC MCU card

dsPIC MCU card's have a very good contact with the Board thru a two-line connector. The bottom of the card is ground plane for noise prevention.Price: $24.90 USD [more]

Empty dsPIC PRO MCU cards

Empty dsPIC MCU card's (80 pin and 64 pin) have a very good contact with the board thru a two-line connector. The bottom of the card is ground plane. Customers can solder their own MCU and other electronic components on this PCB. Price: $4.90 USD [more]

dsPIC PRO 3

UNI-DS 3 [dsPIC]

16-bit PIC24 microcontrollers and dsPIC33 Digital Signal Controllers (DSC) offer a new level of performance and higher integration. Features supporting this compatibility between these families include common: Instruction set & architecture (dsPIC DSCs add DSP capability), Peripherals, Pin-out. With 16 MIPS performance and an extensive peripheral set, the PIC24F MCUs are a highly cost-effective solution for all but the most demanding 16-bit applications. The PIC24F also offers an easy migration path for design engineers whose applications have outgrown the performance offered by 8-bit MCUs. The 40 MIPS dsPIC33F family is developed for high performance embedded control applications. Compared to the dsPIC30F family, the dsPIC33F family offers larger RAM and Flash memory options and adds DMA.

LV 24-33A

System supports 64, 80 and 100 pin PIC24F/24H/dsPIC33F microcontrollers (it comes with PIC24FJ96GA010 - PIC24 16-bit Microcontroller, 96 KB Flash Memory and 8 KB RAM). There is USB 2.0 on-board programmer, on-board mikroICD and on-board TouchPanel controller.Price: $139 USD [more]

LvPICFlash with mikroICD

LvPICFlash with mikroICD support is a programmer and in-circuit debugger for the Microchip's dsPIC33/PIC24 flash microcontroller family. Programmer is driven and powered from a single USB port on your computer and is specifically designed for In-Circuit Serial Programming (ICSP). Price: $89.90 USD [more]

LV24-33 MCU cards

LV24-33 MCU cards MCU card's have a very good contact with the Board thru a two-line connector. The bottom of the card is ground plane for noise prevention.Price: $23/$24.90 USD [more]

Empty LV24-33 MCU cards

Empty PIC24 dsPIC33 MCU card's have a very good contact with the board thru a two-line connector. The bottom of the card is ground plane for noise prevention. Customers can solder their own MCU and other electronic components on this PCB.Price: $4.90 USD [more]

LV24-33A Experimental Board

High Quality mikroElektronika LV24-33A Experimental board will give you easiness of programming microcontroller unit. This experimental board supports LV24-33A MCU Cards.Price: $24 USD [more]

LV 24-33

System supports 64, 80 and 100 pin PIC24F/24H/dsPIC33F microcontrollers (it comes with PIC24FJ96GA010 - PIC24 16-bit Microcontroller, 96 KB Flash Memory, 8 KB RAM and Advanced Peripherals, 100 Pin Package). Price: $139 USD [more]

The PIC32® family is based on the industry-standard MIPS32® architecture, with its leading combination of high performance, low power consumption, fast interrupt response and extensive industry tool support. The high-performance MIPS32 M4K® core can achieve best-in-class 1.5 DMIPS/MHz operation, due to its efficient instruction-set architecture, 5-stage pipeline, hardware multiply/accumulate unit and up to 8 sets of 32 core registers. To reduce system cost, the PIC32 supports MIPS16e™ 16 bit ISA—enabling code-size reductions of up to 40%.

LV-32MX

The system supports 64 and 100 pin PIC32MX microcontrollers (it comes with PIC32MX360F256L). There is USB 2.0 on-board programmer and on-board TouchPanel controller.Price: $149 USD [more]

Cypress PSoC's are programmable systems-on-chips that integrate a microcontroller and the analog and digital components that typically surround it in an embedded system. A single PSoC device can integrate as many as 100 peripheral functions with a microcontroller, saving customers design time, Board space, power consumption, and from 5 cents to as much as $10 in system costs.

EasyPSoC4

The system supports 8, 20, 28 and 48 pin PSoC® microcontrollers (it comes with CY8C27643). There is USB 2.0 on-board programmer and on-board TouchPanel controller.Price: $129 USD [more]

PSoCprog2

USB PSoCprog2 is USB 2.0 IN-SYSTEM programmer for Cypress PSoC microcontroller family. It can program most of the PSoC microcontrollers. Price: $75 USD [more]

PSoC MCU Card

PSoC MCU card has a very good contact with the Board thru a two-line connector. The bottom of the card is ground plane for noise prevention. Price: $18 USD [more]

Empty PSoC MCU Cards

Empty PSoC MCU Cards have a very good contact with the board thru connector. Customers can solder their own MCU and other components on this PCB. Price: $6 USD [more]

mikroPSoC

Small Credit Card size Board with PsoC microcontroller and USB PSoC programmer on it. Power supply can be from USB or external source. Price: $89 USD [more]

UNI-DS 3 [PSoC]

EasyPSoC3

PSoC microcontrollers represent the whole new concept compared to the older microcontrollers, they contain programmable analog and digital blocks, allowing the programmer to pick himself the peripherals needed for the current project. Price: $169 USD [more]

The Atmel AVR is a family of RISC microcontrollers from Atmel. The AVR is a Harvard architecture CPU. It has 32 8-bit registers. Some instructions only operate on a subset of these registers. The concatenated register file, input/output file and data memory make up a unified address space accessed through load/store operations. Unlike the PIC, the stack is located in this unified memory space and isn't strictly limited to a fixed size.

BIGAVR2

System supports 64-pin and 100-pin AVR microcontrollers (it is delivered with ATMEGA128 working at 10MHz). There is USB 2.0 on-board programmer and on-board TouchPanel controller. Price: $135 USD [more]

EasyAVR5A

System supports 8, 14, 20, 28 and 40 pin microcontrollers. It is delivered with ATMEGA16. There is USB 2.0 on-board programmer and on-board TouchPanel controller.Price: $129 USD [more]

AVRprog2

USB AVRprog2 is USB 2.0 IN-SYSTEM programmer for Atmel AVR microcontroller family. It can program all of AVR microcontrollers. Price: $59 USD [more]

UNI-DS 3 [AVR]

BIGAVR MCU cards

BIGAVR MCU cards MCU card's have a very good contact with the Board thru a two-line connector. The bottom of the card is ground plane for noise prevention.Price: $23/$24.90/$29.90 USD [more]

Empty BIGAVR MCU cards

Empty AVR MCU card's (64-pin and 100-pin) have a very good contact with the board thru a two-line connector. The bottom of the card is ground plane. Customers can solder their own MCU and other electronic components on this PCB.Price: $4.90 USD [more]

AT90PWM to DIP40B Adapters

Convert your DIP40 (AVR) socket AT90PWM (AVR) compatible socket. Professional and development adapter from mikroElektronika allows easy and fast working. Price: $6.50/$6.50 USD [more]

BIGAVR

System supports 64-pin and 100-pin AVR microcontrollers (it is delivered with ATMEGA128 working at 10MHz). Many ready made examples guarantee successful use of the system. Price: $135 USD [more]

EasyAVR5

EasyAVR5 development system is a full-featured development Board for Atmel AVR MCU's. System supports 8, 14, 20, 28 and 40 pin microcontrollers. It is delivered with ATMEGA16.Price: $129 USD [more]

The AT89 series is an Intel 8051-compatible family of 8 bit microcontrollers (µCs). Based on the Intel 8051 core, the AT89 series remains very popular as general purpose microcontrollers, due to their industry standard instruction set, and low unit cost. This allows a great amount of legacy code to reused without modification in new applications. While considerably less powerful than the newer AT90 series of AVR RISC microcontrollers, new product development has continued with the AT89 series for the aforementioned advantages. Of more recent times, the AT89 series has been augmented with 8051-cored special function microcontrollers, specifically in the areas of USB, I²C, SPI and CAN bus controllers, MP3 decoders and hardware PWM.

Easy8051B

System is compatible with 14, 16, 20, 28 and 40 pin MCU's (it comes with AT89S8253). There is a fast USB 2.0 programmer on-board. Also there are PLCC44 and PLCC32 sockets on-board.Price: $129 USD [more]

Easy8051A

System is compatible with 14, 16, 20 and 40 pin microcontrollers (it comes with AT89S8253). USB 2.0 Programmer is supplied from the system. Price: $114 USD [more]

8051prog2

USB 8051prog2 is USB 2.0 IN-SYSTEM programmer for 8051 microcontroller family. It can program all of 8051 microcontrollers.Price: $69 USD [more]

UNI-DS 3 [8051]

A characteristic feature of ARM processors is their low electric power consumption, which makes them particularly suitable for use in portable devices. In fact, almost all modern mobile phones and PDAs contain ARM CPU's, making them the most widely-used 32-bit microprocessor family in the world. Today ARM's account for over 75% of all 32-bit embedded CPUs..

EasyARM

System supports 64 and 144 pins microcontrollers (it comes with Philips LPC2148). Each jumper, element and pin is clearly marked on the board. It is possible to test most of the industrial needs on the system: temperature controllers, counters, timers etc.Price: $159 USD [more]

ARMFlash

ARMFlash is a USB 2.0 programmer for ARM family of Philips's microcontrollers. Very fast and easy to connect on your Board. It can program all of Philips ARM microcontrollers.Price: $74.90 USD [more]

EasyARM Experimental Board

High Quality mikroElektronika EasyARM Experimental board will give you easiness of programming microcontroller unit. This experimental board supports EasyARM MCU Cards.Price: $24 USD [more]

ARM MCU card

ARM MCU card's have a very good contact with the Board thru a two-line connector. The bottom of the card is ground plane for noise prevention.Price: $44/$46 USD [more]

UNI-DS 3 [ARM]

The HC908 microcontroller provides intelligence for demanding motion control decisions while its flash memory enables on-the-fly programming and production flexibility. Additional MCU features include dual timer channels, a 10-bit analog-to-digital converter and serial peripheral interface. The 68HC11 is a microcontroller (µC) family descended from the Motorola 6800 microprocessor. The 68HC11 devices are more powerful and more expensive than the 68HC05 microcontrollers, and are used in barcode readers, hotel card key writers, and various other embedded systems.

EasyHC-908

EasyHC-908 development system is a full-featured development Board for Motorola HC-908 microcontrollers. It's been designed to allow students and engineers to easily exercise and explore the capabilities of HC-908 microcontrollers. Price: $114 USD [more]

VR Stamp simplifies the integration of speech recognition into products by combining all key components into a small 40-pin DIP footprint module. A low-noise audio channel and standardized packaging allow rapid prototyping, less debugging and shorter time to market. The VR Stamp offers 24 I/O lines, as well as connections for a power, ground, microphone, speaker, and logic-level RS232 interface. With its small size, full suite of development tools and Sensory's world-class FluentChip™ Technologies, the VR Stamp will change the way you think about speech recognition.

Easy-VRStamp

Easy-VRStamp development system is a full-featured development Board for VR Stamp voice recongnition modules. It's been designed to allow students and engineers to easily exercise and explore the capabilities of VR Stamp voice recongnition modules. Price: $129 USD [more]

GSM is a cellular network, which means that mobile phones connect to it by searching for cells in the immediate vicinity. GSM networks operate in four different frequency ranges. Most GSM networks operate in the 900 MHz or 1800 MHz bands. General Packet Radio Service (GPRS) is a packet oriented Mobile Data Service available to users of Global System for Mobile Communications (GSM) and IS-136 mobile phones. It provides data rates from 56 up to 114 kbit/s. GPRS can be used for services such as Wireless Application Protocol (WAP) access, Short Message Service (SMS), Multimedia Messaging Service (MMS), and for Internet communication services such as email and World Wide Web access.

SmartGSM/GPRS Board

The SmartGSM/GPRS is a development tool that will help in clear understanding of GSM & GPRS technologies. Antenna can be placed on-board for better signal quality. The intuitive design of SmartGSM/GPRS guides student and experienced engineer in learning to combine these two technologies and develop cutting edge products & applications. Price: $99.00 USD [more]

Siemens: EasyGSM/GPRS Board

Evolving product features and modern communications design require the use of GSM(GPRS). The GSM/GPRS module can be used in a wide variety of applications. The MC55 module is full type approved for worldwide operation. Antenna is available on-board for better signal quality.Price: $24.00 USD [more]

Teltonika: EasyGSM/GPRS TM2

Evolving product features and modern communications design require the use of GSM(GPRS). The Teltonika TM2 GSM/GPRS module is small, light weight and low power consumption module that enables GSM/GPRS networks for your device.Price: $24.00 USD [more]

Simcom: EasyGSM/GPRS SIM340Z

Evolving product features and modern communications design require the use of GSM(GPRS). Featuring an industry-standard interface, the Simcom SIM340Z GSM/GPRS module delivers GSM/GPRS performance for voice, SMS, Data, and Fax in a small form factor and with low power consumption.Price: $24.00 USD [more]

Telit: EasyGSM/GPRS GM862

Evolving product features and modern communications design require the use of GSM(GPRS). The Telit GM862 is specifically designed and developed for OEM usage and dedicated to portable data, voice and telematic applications. Price: $24.00 USD [more]

Telit: EasyGSM/GPRS GM862-GPS

Evolving product features and modern communications design require the use of GSM(GPRS) and GPS. The Telit GM862-GPS is specifically designed and developed for OEM usage and dedicated to portable data, voice, telematic and GPS applications. Price: $34.00 USD [more]

GSM/GPRS Components

We would like to provide our customers with extra GSM/GPRS parts for developing purposes. At present, we are offering components for several GSM/GPRS modules as well as accessories for these modules. Click on the image for more information. [more]

A GPS receiver calculates its position by precisely timing the signals sent by the GPS satellites high above the Earth. Each satellite continually transmits messages containing the time the message was sent, precise orbital information (the ephemeris), and the general system health and rough orbits of all GPS satellites (the almanac). The receiver measures the transit time of each message and computes the distance to each satellite. Geometric trilateration is used to combine these distances with the location of the satellites to determine the receiver's location. The position is displayed, perhaps with a moving map display or latitude and longitude; elevation information may be included. Many GPS units also show derived information such as direction and speed, calculated from position changes.

SmartGPS Board

The SmartGPS is a development tool that will help in clear understanding of GPS technologies. Connect GPS (Global Positioning System) to your PC or development board easily with LEA-5S GPS/GALILEO module. Price: $59.50 USD [more]

EasyGPS Board

The EasyGPS is a development tool that will help in clear understanding of GPS technologies. Connect GPS (Global Positioning System) to your prototype board easily with LEA-5S GPS/GALILEO module. Price: $49.00 USD [more]

GPS Components

We would like to provide our customers with extra GPS parts for developing purposes. At present, we are offering GPS module as well as accessories for this module. [more]

DAC Board

DAC is the interface between the abstract digital world and the analog real life. Price: $18 USD [more]

A/D converter with 4.096V VREF

12-bit analog-to-digital converter(ADC) with 4 inputs and 4.096V voltage reference. 4.096V On board voltage reference. Screw terminal for directing external signals to AD converters. Price: $24 USD [more]

CAN-1 Board

CAN was specifically designed to be robust in electromagnetically noisy environments and can utilize a differential balanced line. Price: $18 USD [more]

CANSPI Board

CANSPI Board with SPI interface for all MCU which have SPI communication.Price: $21 USD [more]

IrDA Board

The IrDA defines physical specs. protocol standards for the short range exchange of data over infrared light.Price: $25.90 USD [more]

Compact Flash Board

Easy way to use Compact flash in your design and data acquisition. Record and analyze the information received by the microcontroller on compact flash cards.Price: $21 USD [more]

RS485 Board

The RS485 standard addresses the problem of data transmission, where a balanced (differential) transmission line is used in a multi-drop (party line) configuration (or point-to-point if only two devices are on the network).Price: $18 USD [more]

Three-Axis Accelerometer Board

The ADXL330 is a small, thin, low power, complete 3-axis accelerometer with signal conditioned voltage outputs, all on a single monolithic IC. Measures acceleration with a minimum full-scale range of ±3 g.Price: $26.90 USD [more]

IrDA2 Board

Irda2 serve as wireless RS232 communication between two Microcontrollers. Price: $25.90 USD [more]

Keypad 4x4 Board

Keypad can also be integrated as part of prototype that contains a calculator-style arrangement of buttons.Price: $9 USD [more]

RTC Board

Real-Time clock (RTC) is a electronic clock that keeps track of the current time even when the MCU is turned off. Price: $21 USD [more]

EEPROM Board

EEPROM is typically used to store prototype configuration parameters.Price: $8 USD [more]

MMC/SD Board

MMC card is used as storage media for a portable device, in a form that can easily be removed for access by a PC.Price: $19.90 USD [more]

Serial Ethernet Board

Ethernet is a large and diverse family of frame-based computer networking technologies for local area networks (LANs).Price: $29.90 USD [more]

EasyConnect Board

Connect your peripherals easy and fast using high quality on-board connectors. Useful in power as well as high-speed signal-handling applications. Price: $5 USD [more]

EasyInput Board

Make input levels easy and fast using high quality DIP switch. Conserves board space and permits increased circuit density. Price: $5 USD [more]

DIP to PLCC44 Adapter Board

Professional and production adapter from mikroElektronika allows easy and fast working. You will have to press the PIC into the adapter. After the programming procedure is finished, you can pull the chip out of the adapter.Price: $8 USD [more]

Port Expander Board

The MCP23S17 is the only 16-bit I/O expander that features SPI(tm) clock speeds up to 10 MHz for higher throughput applications. 16-bit remote bi-directional I/O port (I/O pins default to input).Price: $12 USD [more]

PICFlash Experimental Board

High Quality mikroElektronika PIC Experimental board will give you easiness of programming microcontroller unit. There are 8, 10, 14, 18, 28 and 40 pin DIP sockets.Price: $12 USD [more]

GLCD 240x64 Adapter

Connect your T6963C (Toshiba) 240x64 GLCD easily. High quality graphic lcd connector with adjustable contrast. Price: $10 USD [more]

LCD Adapter

Connect your Character LCD easily and save MCU pins. High quality graphic lcd connector with adjustable contrast. Price: $10 USD [more]

GLCD 128x64 Adapter

Connect your 128x64 GLCD easily and save MCU pins. High quality graphic lcd connector with adjustable contrast. Price: $10 USD [more]

Serial LCD/GLCD Adapter

Connect your 128x64 GLCD and 2x16 Character LCD easily and save MCU pins. High quality serial graphic lcd connector with adjustable contrast. Price: $14 USD [more]

Serial LCD Adapter

Connect your Character LCD easily and save MCU pins. High quality serial Character LCD connector with adjustable contrast. Price: $14 USD [more]

Serial GLCD 240x128 Adapter

Connect your T6963C (Toshiba) 240x128 Graphic LCD easily. High quality serial graphic lcd connector with adjustable contrast. Price: $14 USD [more]

Serial GLCD 240x64 Adapter

Connect your T6963C (Toshiba) 240x64 Graphic LCD easily. High quality serial graphic lcd connector with adjustable contrast. Price: $14 USD [more]

GLCD 240x128 Adapter

Connect your T6963C (Toshiba) 240x128 Graphic LCD easily. High quality serial graphic lcd connector with adjustable contrast. Price: $10 USD [more]

3.3VReg Board

This regulator can provide local on-card regulation, eliminating the distribution problems associated with single point regulation. Price: $9.90 USD [more]

EasyPROTO Board

Connect your prototype board with high quality IDC10 connector. Price: $6 USD [more]

EasyConnect2 Board

Connect your peripherals easy and fast using high quality on-board small connectors. Useful in power as well as high-speed signal-handling applications. Price: $5 USD [more]

Flat Cable 1

Connect your prototype board via IDC10 to IDC10 high quality connector easily. Price: $3.20 USD [more]

5V-3.3VReg Board

This regulator can provide local on-card regulation changing your voltage from AC/DC 8-16V to 5V or 3.3V. Price: $11.90 USD [more]

SmartADAPT MINI

Configure your 8 output pins for your specified needs just by moving jumpers on-board. Price: $10.00 USD [more]

SmartADAPT

Configure your 8 output pins for your specified needs just by moving jumpers on-board. Also there is a jumper for selecting input voltage. Price: $11.00 USD [more]

SmartADAPT2

Configure your 16 output pins for your specified needs just by moving jumpers on-board. Also there is a jumper for selecting input voltage. Price: $12.90 USD [more]

SmartADAPT2 - GLCD/LCD conn.

Configure your 16 output pins for your specified needs just by moving jumpers on-board. Also there is a jumper for selecting input voltage and configurable GLCD/LCD connector. Price: $14.90 USD [more]

SmartPROTO Board

Connect your development board to high quality PCB prototype board via IDC10 connector. Price: $4.90 USD [more]

Digital Potentiometer Board

Digital Potentiometer with MCP41010 SPI Interfaced single-channel digital potentiometer on-board. Set potentiometer values from 0 ... 10 kΩ. Price: $16.90 USD [more]

Serial 7-seg Display Board

MAX7219 SPI Interfaced, LED Display Drivers with 4 Common-Cathode LED Displays on-board. Connects via IDC10 connector on-board. Price: $16.90 USD [more]

Serial 7-seg Display 2 Board

MAX7219 SPI Interfaced, LED Display Drivers with 8 Common-Cathode LED Displays on-board. Connects via IDC10 connector on-board. Price: $21.90 USD [more]

EasyMP3 Board

Add MP3 to your prototype with VS1011e MPEG audio layer 3 decoder with SPI Interface. Screw terminal for easier connection with the external peripherals. Price: $21.90 USD [more]

SmartMP3 Board

Add MP3 to your prototype with VS1011e MPEG audio layer 3 decoder with SPI Interface. Audio Amplifiers and Voltage Level Selection (5V or 3.3V). Price: $29.90 USD [more]

MAX232 Board

Connect MAX232 board to your prototype board easily with MAX232N - Dual RS232 Driver/Receiver on-board. Price: $7.90 USD [more]

Ethernet Connector Board

Connect your prototype board to Ethernet easily with 10/100 Base-Transformer RJ45 connector on-board. Price: $9.90 USD [more]

Light to Frequency Board

Add light to frequency converter to your prototype with TSL230BR programmable light-to-frequency converter on-board. Price: $17.90 USD [more]

Motion Sensor Board

AMN11112 sensor detects changes in infrared radiation which occur when there is movement by a person (or object) which is different in temperature from the surroundings. Price: $15.90 USD [more]

mikroDrive Board

High-current Darlington arrays are ideally suited for interfacing between low-level logic circuitry and multiple peripheral power loads. Price: $18.00 USD [more]

AudioAMP Board

The LM386 is a power amplifier designed for use in low voltage consumer applications. The quiescent power drain is only 24 milliwatts. Price: $14.00 USD [more]

LIN Board

The MCP201 provides a physical interface between a microcontroller and a LIN half-duplex bus. It is intended for automotive and industrial applications. Price: $21.00 USD [more]

PIC-Ready Board

High Quality mikroElektronika prototype board with extension pin headers for 40 pin Microchip PIC microcontroller will give you easiness of programming microcontroller unit. Price: $24.00 USD [more]

dsPIC-Ready Board

High Quality mikroElektronika prototype board with extension pin headers for 40 pin Microchip dsPIC microcontroller will give you easiness of programming microcontroller unit. Price: $24.00 USD [more]

AVR-Ready Board

High Quality mikroElektronika prototype board with extension pin headers for 40 pin Atmel AVR microcontroller will give you easiness of programming microcontroller unit. Price: $24.00 USD [more]

8051-Ready Board

High Quality mikroElektronika prototype board with extension pin headers for 44, 40 and 20 pin Atmel 8051 microcontroller will give you easiness of programming microcontroller unit. Price: $24.00 USD [more]

3.3V-5V Voltage Translator

Use 3.3V in 5V voltage systems with LVCC3245A 8-bit - non-inverting bus transceiver on-board. Price: $19.90 USD [more]

5V-3.3V Voltage Translator

Use 5V in 3.3V voltage systems with LVCC3245A 8-bit - non-inverting bus transceiver on-board. Price: $19.90 USD [more]

EasyTEST Board

Connect your prototype board with oscilloscope and other monitoring devices easily. Price: $6.00 USD [more]

TouchPanel Controller Board

Connect your prototype board with TouchPanel. TouchPanel controller with connector is available on-board. Price: $16.00 USD [more]

RFid Reader Board

Add RFid reader to your prototype easily. The RFid reader can be used in a wide variety of applications. Price: $24.00 USD [more]

PS/2 Connector Board

Connect your prototype board to PS/2 device easily with PS/2 connector on-board. Price: $6.90 USD [more]

USB Connector Board

Connect your prototype board to USB easily with USB connector on-board. Price: $6.90 USD [more]

EasyBee Board

Connect your development board to wireless network using low power high-sensitivity ZigBit Module with Dual Chip Antenna. Price: $39.95 USD [more]

Bee PROTO Board

Connect your prototype board to wireless network using low power high-sensitivity ZigBit Module with Dual Chip Antenna. Price: $38.00 USD [more]

ICD2 Connector Board

Connect your prototype board to ICD2 with ICD2 connector. ICD2 Connector board solves your prototying problems by offering complete, cost effective solution. Price: $4.00 USD [more]

MMC/SD Card Proto Board

Easy way to use Multi Media and Secure Digital cards in your prototype design, data acquisition etc... Price: $19.00 USD [more]

Potentiometer Board

Test analog inputs on your development board easily. Connect your development board to potentiometer board via IDC10 connector. Price: $16.00 USD [more]

Serial Ethernet PROTO Board

Connect your prototype device with ethernet network using Serial Ethernet PROTO Board (there is ENC28J60 Stand-Alone Ethernet Controller with SPI Interface on-board). Price: $29.90 USD [more]

RTC2 Board

Add Real-Time Clock (RTC) to your application using DS1307. The DS1307 serial real-time clock (RTC) is a low-power, full binary-coded decimal (BCD) clock/calendar plus 56 bytes of NV SRAM. Price: $21.00 USD [more]

RTC2 PROTO Board

Add Real-Time Clock (RTC) to your prototype device using DS1307. The DS1307 serial real-time clock (RTC) is a low-power, full binary-coded decimal (BCD) clock/calendar plus 56 bytes of NV SRAM. Price: $21.00 USD [more]

SIM Card Holder Board

Connect your prototype device with SIM Card easily. SIM Card Holder Board solves your prototying problems by offering complete, cost effective solution. Price: $6.00 USD [more]

TouchPanel Controller PROTO

Connect TouchPanel to your prototype device easily with TouchPanel controller PROTO. TouchPanel controller with connector is available on-board. Price: $14.00 USD [more]

EasyBT - Bluetooth® Module

EasyBT Bluetooth® Module Board is an effective and low-cost solution to free your prototype device from wires. Compliant with the Bluetooth® 2.0 Specification. Price: $39.00 USD [more]

Microphone AMP Board

Add to your prototype power amplifier with microphone designed for use in low voltage applications using Microphone AMP Board. Price: $12.00 USD [more]

RTC PROTO Board

Add Real-Time Clock (RTC) to your prototype device using PCF8583 clock/calendar circuit based on a 2048-bit static CMOS RAM organized as 256 words by 8 bits. Price: $21.00 USD [more]

TouchPanel Connector Board

Connect your prototype board to TouchPanel with TouchPanel connector Board. TouchPanel connector is available on-board. Price: $4.00 USD [more]

mikroBuffer Board

Buffer the analog signals connected to development board inputs using unity gain operational amplifiers. MCP6284 is available on-board. Price: $14.00 USD [more]

mikroBuffer PROTO Board

Buffer the analog signals connected to prototype device inputs using unity gain operational amplifiers. MCP6284 is available on-board. Price: $12.00 USD [more]

PROTO Connect Board

Connect your prototype device easy and fast using high quality connectors with 8 on-Board screw-terminated connectors. Price: $3.00 USD [more]

PROTO Connect 2 Board

Connect your prototype device easy and fast using high quality connectors with 2 on-Board screw-terminated connectors. Price: $4.00 USD [more]

Serial GLCD with Touch Screen

Add SERIAL T6963C (Toshiba) 240x128 Graphic LCD with Touch screen to your application. You can choose between two serial communications: SPI or USART. Price: $79.00 USD [more]

Bipolar Stepper Motor Driver

Add stepper motor control to your prototype device with A3967SLB - complete microstepping motor driver. Supports Mixed, Fast, and Slow Current-Decay Modes. Price: $24.00 USD [more]

RS232 Serial Ethernet Board

Add ethernet connectivity to your prototype device easily with RS232 Serial Ethernet Board. Serial communication is done via RX and TX lines. Price: $35.90 USD [more]

RS232 Serial MMC Card Board

Add mass storage media to your prototype device fast and easy with RS232 Serial MMC CARD Board. Serial communication is done via RX and TX lines. Price: $24.00 USD [more]

EasyADC Board

Connect 12-bit analog-to-digital converter (ADC) with 4 inputs and 4.096 Vref to your development board using MCP3204. Price: $24.00 USD [more]

ADC PROTO Board

Add 12-bit analog-to-digital converter (ADC) with 4 inputs and 4.096 Vref to your prototype device using MCP3204. Price: $24.00 USD [more]

IrDA PROTO Board

Connect your prototype device via Infra red communication using MCP2155 driver into wireless network. Price: $25.90 USD [more]

R2R DAC Board

Connect your development board with R2R DAC - digital-to-analog converter using a R/2R-network. Price: $9.00 USD [more]

Light to Frequency 2 Board

Add light to frequency converter to your prototype with TSL230BR programmable light-to-frequency converter. Price: $17.90 USD [more]

Serial 7-Seg 8-Digit Board

MAX7219 SPI Interfaced, LED Display Drivers with 8 Common-Cathode LED Displays in a row on-board. Connects via IDC10 connector on-board. Price: $21.90 USD [more]

We would like to provide our customers with extra MCU parts for developing purposes. At present, we are offering components for several microcontroller families compatible with our development systems. Additional microcontrollers can be purchased with PIC, dsPIC, AVR, 8051, and other development systems. Also you can buy additional Graphic LCD and 2x16 Character LCD. DS1820 temperature sensor is also available. Click on the image for more information.[more]

We would like to provide our customers with extra SOIC, SOP, TSSOP and SSOP adapters for developing purposes. Professional and development adapters from mikroElektronika allows easy and fast working. At present, we are offering components for several adapters for various soic, sop, tssop and ssop packages.[more]

Info

On-Line secure order form provide fast and safe way for buying MikroElektronika product.

All development systems are shipped in special protection boxes.

All prices are in USD.

On-Line secure order form provide fast and safe way for buying MikroElektronika product.

Shipping: $25 for all countries.