-
Products
-
- Store
- Distributors
- Libstock
- Contact Us
EasyMx PRO™ v7 is all about connectivity. Having two different connectors for each port, you can connect accessory boards, sensors and your custom electronics easier then ever before.
Powerful on-board mikroProg™ programmer and hardware debugger can program and debug over 270 Stellaris® devices. You will need it, whether you are a professional or a beginner.
TFT 320x240 with touch panel, stereo mp3 codec, audio input and output, navigation switch and microSD card slot make a perfect set of peripherals for multimedia development.
Just plug in your mikroBUS™ board, and it’s ready to work. We picked up a set of the most useful pins you need for development and made a pinout standard you will enjoy using.
EasyMx PRO™ v7 for Stellaris® ARM® is a full-featured development board for Stellaris® ARM® Cortex™-M3 and Cortex™-M4 microntrollers. It contains many on-board modules necessary for development of variety of applications, including multimedia, Ethernet, USB, CAN and other. On-board mikroProg™ programmer and debugger supports over 270 ARM® microcontrollers. Board is delivered with MCU socket containing LM3S9B95.
It’s a big difference
What makes this board so unique is that it comes with powerful on-board mikroProg™ programmer and hardware debugger, capable of programming more than 270 Stellaris® ARM microcontrollers. This makes development with EasyMx PRO™ v7 a whole new experience. Whether you are just a beginner, or a well-trained professional, this remarkable feature is an irreplaceable advantage.
17 on-board modules for all kinds of development
Board has modules for all kinds of development. TFT with Touch Panel, along with stereo mp3 codec allow you to develop multimedia applications. There are 2 USB connectors and 2 USB-UART connectors on the board as well. Piezo buzzer will help you test your sound signalization, and you can use I2C EEPROM, Serial Flash and microSD card slot to store data. DS1820 and LM35 temp sensor sockets are here too.
Supports Click™ Boards
With two mikroBUS™ sockets you can add dozens of new functionality to your board with minimum hardware adjustments. Collection of mikroBUS™ compatible Click Boards is growing rapidly, and we have designed them with great care, so you don’t have to make any complicated settings. Just plug your board in, and you are good to go.
RJ-45 connector
Board is equipped with Ethernet connector
and two signal LEDs which enable you to
utilize ethernet feature of Stellaris®
microcontrollers.
All you need to get started: well commented and easy to understand examples and colour user-friendly manuals. Examples demonstrate each on-board module and are a great starting point for your future projects. User manuals are easy to read, with good explanations and lots of photos.
Examples are written for all mikroE ARM compilers: mikroC, mikroBasic and mikroPascal. They are well commented and each example contains working HEX file which you can load and use right away.
For drivers and software for on-board mikroProg™ programmer and debugger visit Programming tab.
Hover your cursor over the desired module and instantly get more information. Get to know your board even before you buy it.
You can simulate analog inputs using two provided analog potentiometers which can be connected to each of the 10 supported microcontroller analog input pins.
Audio connectors enable you to connect headphones and microphone with the audio codec chip and use it in your applications.
Use these switches to pull-up or pull-down buttons in each input/output group.
Board contains SN65HVD230 CAN controller chip connected to screw terminal connector. This way you can implement industry-standard CAN communication with your device.
Board supports Dallas DS1820 One-Wire digital temperature sensor. You can measure temperatures from -55C to +125C (-67F to +257F), with 0.5C accuracy.
Microcontrollers with internal ethernet support can be connected to this RJ-45 connector to establish ethernet communication.
Two male IDC10 port headers are available in each Input/Output group, which is convenient for easier access to any PORT pin.
Each Input/Output PORT group contains red SMD LEDs with low current consumption of only 1mA. Board contains total of 36 LEDs for PORT pins.
Tri-state DIP switches are used to enable 4K7 pull-up or pull-down resistor on ony desired PORT pin.
Push buttons in each Input/Output group enable you to have digital inputs on each port pin. Buttons are of high quality and have an exceptional and stable response.
The LM35 is a low-cost precision integrated-circuit analog temperature sensor. It can measure temeperatures from -55C to +150C with 0.25C accuracy at room temperatures.
80-MHz operation; 100 DMIPS performance, Nested Vectored Interrupt Controller (NVIC), 256 KB Flash memory up to 50 MHz; 96 KB SRAM, and more.
microSD Card slot allows you to store large ammounts of data externally on microSD card using fast SPI communication.
EasyMx® PRO v7 for Stellaris® ARM® provides two mikroBUS sockets for mikroElektronika Click Boards. mikroBUS provides simple and effective Plug-and-Play connectivity solution.
EasyMx® PRO v7 for Stellaris® ARM® provides two mikroBUS sockets for mikroElektronika Click Boards. mikroBUS provides simple and effective Plug-and-Play connectivity solution.
On-board mikroProg™ In-Circuit Debugger and programmer is supports over 270 Stellaris® ARM® Cortex™-M3 and M4 microcontrollers from Texas Instruments®
VS1053 MPEG audio codec with SPI interface is available for audio input and output. Codec supports many compresstion file formats.
Navigation switch can be used for handling the on-screen menus or as a generic input device.
Three separate GND pins are available on the board for easier connection of GND reference for oscilloscope probes.
With piezo buzzer you can debug your applications, or have audio signalization feature. It can be connected to two digital output pins, one of which is the output of PWM module.
Board is equipped with power supply unit capable of supporting 3.3V microcontrollers and peripherals. Board can be powered over USB cable, or external adapter connectors.
Programmer USB connector is connected to on-board mikroProg, but can also be used to power the board, when the J1 jumper in the Power Supply section is in the USB position.
High quality reset button with surrounding reset circuitry ensures stable reset operation.
We have provided additional PORT header on the left side of the board, so you can now access the desired microcontroller pins on the other side of the board too.
You can store 8x256 bytes of configuration data or other data into on-board 24AA01 Serial EEPROM with I2C interface.
Store up to 8 Mbit of data in EN25F80 Serial Flash Memory with 25 MHz SPI Bus Interface. It suports over 100,000 Erase/Program Cycles per Sector and has over 20 Year Data Retention.
Backlight of TFT display is driven with a specialized driver circuit, which ensures that proper values of voltage and current are delivered, necessary for optimum display brightness.
320x240 TFT Color Display with Touch Panel can display vivid and clear color images or advanced graphic content.
Touch panel controller with connector is provided for analog resistive touch panels attached to the TFT 320x240 to form TFT Touch screen.
USB Device Connector is used for connecting the board with other devices such as PC using fast USB 2.0 communication.
USB Host Connector enables your device to behave as USB host. You can communicate with other USB slave devices, such as Flash Sticks, cameras, mp3 players and more.
Fast on-board FTDI chip with USB connector, allows you to communicate with a PC or other UART devices using USB-UART connection.
Fast on-board FTDI chip with USB connector, allows you to communicate with a PC or other UART devices using USB-UART connection.
On-board mikroProg™ currently supports ARM® Cortex™-M3 and Cortex™-M4 microcontrollers from Stellaris®. Browse through the list of supported devices or use the search box to filter out the microcontrollers or families you are interested in. For example, by typing "LM3S1" will leave only LM3S1XX and LM3S1XXXX microcontrollers in the list. More detailed search string will leave more narrow list of devices in the list box.
|
||||||
Equip your EasyMx PRO™ v7 for Stellaris® ARM® board with accessories. Add temperature sensors, UART and USB cables, and use wire jumpers for additional testing and connections.
Equip your EasyMx PRO™ v7 for Stellaris® ARM® board with accessories. Add temperature sensors, UART and USB cables, and use wire jumpers for additional testing and connections.
Get additional cable for your USB or USB-UART connection. We offer 1.8m long high-quality cable with transparent silicon insulation, which supports USB 2.0 data rates.
$4.50
If you need another LM3S9B95 for your development you can get it here. 80 MHz operation; 100 DMIPS performance, 256 KB Flash memory up to 50 MHz; 96 KB SRAM, and more.
$24.00
Expand your EasyMx PRO™ v7 functionality by adding DS1820 1-wire digital temperature sensor with -55°C to +128°C temperature range, and ±0.5°C accuracy. Sensor comes in TO-92 packaging.
$7.40
LM35 is the analog temperature sensor supported by EasyMx PRO™ v7, whose output voltage is lineary proportional to the Celsius temperature. It has -55°C to +150°C temperature range, and ±0.75°C accuracy.
$3.50
Use plastic telescopic pen for increased precision when working with your touch panel applications. This Plastic Pen is meant to be used with resistive touch panels only.
$2.00
Easily connect your EasyMx PRO™ v7 with additional electronics using wire jumpers. We offer femate-to-female, male-to-male and female-to-mail single pin wire jumper flavours.
$3.00
EasyMx PRO™ v7 for Stellaris® ARM® is packed in the protective box along with the relevant documentation and product DVD. This box is very resistant to all kinds of damages and shocks. The package contains:
Damage resistant
protective box
EasyMx PRO™ v7 board in
antistatic bag
USB cable
User Manual and
Board Schematic
DVD with documentation
and code examples
Secure online payments provided by 2Checkout.com, Inc. All credit card and personal details are kept secure, and our customer list is not disclosed to any third party.
We deliver our products to all countries in the world using following shipping options:
DHL Express: $25.00 USD for up to 5 Kgs, usually arrives in 2-4 business days.
Post Office $25.00 USD, no weight limit, usually arrives in 7-12 business days.
Note: Please contact local office of the chosen courier about delivery service and possible additional charges.
EasyMx PRO v7 for Stellaris® ARM®
$169.00 USD
Optional:
Ethernet MCU card with LM3S9B95 (100-pin TQFP)
$24.00 USD
Standard MCU card with LX4F232H5QD (144-pin TQFP)
$24.00 USD
Standard empty MCU card for 48-pin TQFP Stellaris® x00 series
$5.50 USD
Standard empty MCU card for 100-pin TQFP Stellaris® 1000 series
$5.50 USD
Standard empty MCU card for 100-pin TQFP Stellaris® 3000 series
$5.50 USD
Standard empty MCU card for 64-pin TQFP Stellaris® 3000 series
$5.50 USD
Ethernet empty MCU card for 100-pin TQFP Stellaris® 8000 series
$5.50 USD
Ethernet empty MCU card for 100-pin TQFP Stellaris® 9000 series
$5.50 USD
Standard empty MCU card for 144-pin TQFP Stellaris® LM4F series
$5.50 USD
Follow us on
Copyright © 1998 - 2013. MikroElektronika. All rights reserved. All trade and/or services marks mentioned are the property of their respective owners.
Support
Forum
mikroBUS
Lets make
Press
Legal Information
Product Archive
About Us