Note: GLCD, COG, DS1820 and Serial Cable are not included in the price!
Easy8051 v6 development system supports a wide range of Atmel 8051 microcontrollers.
Very fast, on-board USB 2.0 programmer with a simplified driver installation.
Serial COG Display that uses SPI interface is available for displaying text messages.
Easy8051 v6 allows 8051 microcontrollers to be interfaced with numerous peripheral devices. It comes with an AT89S8253.
On-board 16-bit I/O port expander MCP23S17 that uses SPI communication.
Seven-segment displays in multiplex mode are connected to the microcontroller socket.
RS-232 communication with a PC or a microcontroller is performed via DB9 connector.
System can be easily configured by means of DIP switches. Each DIP switch configures one part of the system.
Temperature sensor DS1820 measures temperature from -55°C to 125°C. It is connected to the system via socket.
4 seven-segment displays in multiplex mode. They also have an interface to the microcontroller.
On-board A/D converter MCP3204 with a potentiometer is used for testing multiple A/D conversions.
USB or external power supply source is selected by moving a jumper. Power supply switch turns the system on/off.
Voltage reference for A/D converter can be VCC (5V) or 4.096 V.
All pins are connected to the IDC10 connectors for further expansion.
38 LEDs (Light Emitting Diodes) are used to indicate the logic state of all microcontroller pins.
On-board jumpers used for pull-up/pull-down port configuration. These jumpers are available for all pins.
38 push buttons are used to excite microcontroller digital inputs. They are connected to all microcontrollers pins.
DIP switch is used to separate port pins from pull-up/pull-down resistors.
Fast, on-board USB 2.0 programmer. There is no need to connect the external programmer.
LCD can be easily connected via the on-board connector. This connector is also connected to MCU pins.
LCD Contrast Potentiometer is used for adjusting LCD contrast in a fast and easy way.
System provides support for MCUs in DIP14, DIP16, DIP20, DIP28, DIP40, PLCC44 and PLCC32 pin packages.
All MCU pins are marked on the back of the board. These marks provide basic information on the pins.
Voltage level to be applied when a button is pressed (GND or +5V) is selected by means of the on-board jumper.
Graphic LCD 128x64 can be easily connected via the on-board connector. It is also connected to MCU pins.
Reset circuit is used to reset the microcontroller. It is connected to the MCLR pin of the microcontroller.
GLCD Contrast Potentiometer is used for adjusting graphic LCD contrast.
On-Board USB 2.0 Programmer
USB 2.0 Programmer is driven by a single USB port on a PC. No additional AC power adapter is needed. The programmer is recognized by Windows, which simplifies the driver installation. The programmer board is specifically designed for In-Circuit Serial Programming (ICSP).
This USB programmer doesn't use a bootloader or any similar software for programming. The whole 8051 memory and all pins are available to you. This is a USB 8051 InSystem programmer ideal for your future projects. Note: This programmer supports only 8051 microcontrollers with SPI Serial Interface for Program Downloading.
Windows® Certified Drivers
Drivers for the on-board programmer are Microsoft® Windows® XP, Windows® Vista and Windows® 7 certified. The Windows certificate is a proof that the programmer supports mentioned Windows operating systems and is immediately recognized by the system, which guarantees correct Plug and Play functionality. Driver certification provides users with a wide range of benefits such as stable functioning, the ability to install and delete drivers without rebooting and compatibility with future versions of Windows.
The Easy8051 v6 development system supports a wide range of 8051 microcontrollers. Newly released 8051 microcontrollers will be supported by a new version of 8051flash software that is updated regularly. Here is a list of microcontrollers supported by the Easy8051 v6 development system:
|Atmel 8051 Microcontroller Family|
Examples that come with this development system will show you how to connect the 8051 microcontroller to other peripheral components or devices and how to develop your prototype device easily. Each example contains a detailed description of the relevant program including comments. All these examples can be downloaded from this page as well.
- Demonstration of SPI communication with A/D converter.
- Keypad library routines example.
- Examples of OneWire communication - Interfacing the DS1820 temperature sensor.
- 7 segment display demonstration example.
- Demonstration of using Button Library.
- Example of writing text messages on LCD.
- Demonstration of the Port Expander library routines.
- Simple demonstration examples of UART module library.
- Graphic LCD library routines demonstration.
- LED Blinking and Led Curtain Example.
- Example of displaying text on COG Display.
The Easy8051 v6 development system is packed in the protective box along with the relevant documentation and product CD. This box is very resistant to all kinds of damages and shocks. Note: GLCD, LCD, DS1820 and Serial Cable are not included in the price. The package contains:
- Easy8051 v6 development system.
- USB cable.
- CD with software, drivers and examples in C, BASIC and Pascal.
- Printed documentation that includes: Easy8051 v6 Manual, Easy8051 v6 Schematic Diagram and Quick Guide for Installing USB Drivers.
This product is shipped with fully functional demo versions of mikroC PRO for 8051, mikroBasic PRO for 8051 and mikroPascal PRO for 8051 compilers. All demo versions include a hex output limited to 2k of program words. These compilers come with examples for easy prototype development.
Accessory Boards were designed to allow students or engineers to easily exercise and explore the capabilities of the various microcontrollers with peripheral devices such as: ADC, DAC, CAN, Ethernet, IrDA, MP3, RS485 and many more. Click on the image below to find accessory boards that suits your needs. Note: Accessory Boards are sold separately.